• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.71-78
• /
• 1999

In this paper, a new model for optical phase-locked loop(OPLL) is proposed that includes VCO laser frequency response as well as loop propagation delay. It is found that both of them greatly affect the OPLL performance. Our model can be used for realizing high-performance microwave-range OPLL.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.4
• /
• pp.82-87
• /
• 1998

여러 음원들에 의해 형성된 파동장내에서 각 신호음의 주파수 특성과 시간 지연 (time delay)을 추정할 수 있는 알고리즘을 개발하였다. 이 알고리즘의 관련 수식은 두 개의 상호 간섭하는 신호가 입사하고 여기에 주변 환경에 의한 랜덤 잡음이 첨가된다고 가정하여 유도되었으며 두 개 이상의 신호음이 있는 상황에 대해 확장이 가능하다. 본 논문에서 시간 지연이 일정한 수신 신호 영역에 등간격으로 놓여진 수신기로부터 각 센서에 수신된 신호의 스펙트럼은 M개의 센서에 대해 K개의 음원 스펙트럼과 K개의 조정 벡터(steering vector) 의 선형 조합(linear combination)으로 주파수에서 모델된다. 각 음원의 주파수 특성과 음원 으로 들어오는 신호의 입사각을 결정하기 위하여 본 알고리즘은 전달 행렬(transfer matrix) 을 계산하고 그 전달 행렬의 고유값(eigenvalue)과 고유벡터(eigenvector)를 분석한다. 이 고 유값들은 복소수이며 그 크기는 진폭 변환 계수를 결정한다. 위상은 수신기의 간격으로부터 시간 지연을 결정하는 기울기를 갖는 주파수의 선형 함수이다. 전달 행렬에의 입력 자료들 은 동일 간격 소자간의 cross-power spectra이다.

• 한국IT서비스학회:학술대회논문집
• /
• 2009.05a
• /
• pp.327-330
• /
• 2009

무선랜 (WLAN)과 지그비 (Zigbee)는 동일한 2.4GHz대의 비면허 주파수 대역(ISM-Band)을 사용하기 때문에 네트워크 간의 주파수 간섭이 발생한다. 더욱이 지그비의 경우 무선랜의 채널과 중첩되지 않는 채널은 단 두 개 채널에 불과하기 때문에 무선랜의 주파수 간섭을 받을 경우 통신 지연 시간의 증가가 불가피 하다. 이에 본 논문에서는 지그비와 무선랜 간의 주파수 간섭으로 인해 발생하는 통신 지연 시간 최소화를 위한 빠른 채널 변경 알고리즘을 제안한다. 이와 더불어 제안 알고리즘의 성능 분석을 위해 모의실험을 수행하였고, 그 결과 제안 알고리즘의 통신 지연 시간이 감소됨을 확인하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.7
• /
• pp.771-777
• /
• 2008

In this paper, a frequency doubler using modified time-delay technique is proposed. A voltage controlled delay line (VCDL) in the proposed frequency doubler compensates the group delay time mismatching between input and delayed signal. With the group delay time matching and waveform shaping using the adjustable Schmitt triggers, the unwanted fundamental component($f_0$) and the higher order harmonics such as third and fourth are diminished excellently. In result, only the doubled frequency component($2f_0$) appears dominantly at the output port. The frequency doubler is designed at 1.15 GHz of $f_0$ and fabricated with TSMC $0.18\;{\mu}m$ CMOS process. The measured output power at $2f_0$ is 2.67 dBm when the input power is 0 dBm. The obtained suppression ratio of $f_0,\;3f_0$, and $4f_0$ to $2f_0$ are 43.65, 38.65 and 35.59 dB, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.3
• /
• pp.269-281
• /
• 2014

In this paper, a systematic design of a low phase noise voltage-tuned dielectric resonator oscillator(VTDRO) using loop group delay is proposed. Designed VTDRO is closed-loop type and consists of a cascade connection of a resonator, phase shifter, and amplifier. Firstly, a reference VTDRO is fabricated and its phase noise and electrical frequency tuning range are measured. Both the phase noise and electrical frequency tuning range depend on the loop group delay. Then, a required value of loop group delay for a new VTDRO with a low phase noise can be systematically computed. In addition, its phase noise and electrical frequency tuning range can be theoretically estimated using those obtained from the measurement of the reference VTDRO. When the loop group delay increases, the phase noise decreases and the electrical frequency tuning range also decreases. The former predominantly depends on the resonator structure. Therefore we propose a systematic design procedure of a resonator with high group delay characteristics. The measured loop group delay of the new VTDRO is about 700 nsec. The measured phase noise of the new VTDRO show a state-of-the-art performance of 154.5 dBc/Hz at 100 kHz frequency offset and electrical frequency tuning range of 448 kHz for a voltage change of 0~10V. The oscillation power is about 4.39 dBm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.42-49
• /
• 2016

In this paper, we design and fabricate an instantaneous frequency measurement receiver with a frequency resolution of 125 MHz which detects and measures continuous signals in 4~6 GHz using path difference of delay lines. The receiver has a 4-bit configuration and consists of power dividers, delay lines, power combiners, power detectors, voltage comparator circuits and so on. The accuracy of the instantaneous frequency measurement is improved by applying offset voltage compensation to the comparator circuits to compensate the frequency-dependent path loss of the delay line and the frequency dependence of power detection.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.7
• /
• pp.79-84
• /
• 2013

In this paper, the method of multiple PS(pilot symbol) QAM channel compensation is suggested in order to analyze and improve occurring problems in case of delay waves in Frequency-Selective Rayleigh fading channels through Pilot Symbol Assisted Modulation(PSAM) which is a method predicting and compensating fading information, using Pilot Symbol in flat fading channels. This suggested method shows stable improvement in its performance even though it is effected by the level of delay on delay waves while the existing PSAM method has severe malfunction with a small amount of level of delay on delay waves regardless of signal-to-noise ratio(SNR).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3A
• /
• pp.248-255
• /
• 2008

In an OFDMA system the performance of multi-user scheduling in the frequency domain is affected by the frequency selectivity of the channel. If the channel is too flat in the frequency domain, the multi-user scheduling gain might be degraded. On the contrary, if the frequency selectivity is too high and the magnitude of the frequency response severely fluctuates on the allocation bandwidth, it is also hard to get sufficient scheduling gain. For maximizing the multi-user scheduling gain, a cyclic delay diversity technique can be used to adjust the frequency selectivity of the channel. This paper proposes a method to determine the optimal delay value of cyclic delay diversity according to the allocation bandwidth and the channel characteristics.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.811-816
• /
• 2019

This paper first proposes a technique to separate clean speech signals and mixed noise signals by using an independent vector analysis algorithm of frequency band for 4 channel speech source signals with a noise. An improved output speech signal from the proposed independent vector analysis algorithm is obtained by using the cross-correlation between the signal outputs from the frequency domain delay-sum beamforming and the output signals separated from the proposed independent vector analysis algorithm. In the experiments, the proposed algorithm improves the maximum SNRs of 10.90dB and the segmental SNRs of 10.02dB compared with the frequency domain delay-sum beamforming algorithm for the input mixed noise speeches with 0dB and -5dB SNRs including white noise, respectively. Therefore, it can be seen from this experiment and consideration that the speech quality of this proposed algorithm is improved compared to the frequency domain delay-sum beamforming algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.512-515
• /
• 2010

SIGINT(SIGnal INTelligence) includes several parameters intercepted by measurement and analysis of the RF(Radio frequency) signal from free space. One of the important parameters is frequency information. Expecially, in order to perform instantaneous frequency measurement of Radar and Missile seeker's RF signals, we use dedicated RF modules as a DFD(Digital Frequency Discriminator) to provide frequency information by measurement of the relative phase difference between signals via intended RF delay lines. It must measure and provide realtime based frequency information on short pulsed RF signal up to 100 nSec or less. This document proposes Ultra wideband DFD consisted of a RF input section of Wideband 4 channel RF delay line and correlator, a digital processing section to measure and provide frequency information from I/Q signal, and a frequency calibration section. Also, it will show design suitability based on test results measured under test condition of very short input pulse signals.