• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.2
• /
• pp.5-11
• /
• 1974

Theoretical analysis is carried out for the beat frequency generation phenomena in the IMPATT diodes an4 the experimental studies are given in parrallel. The theory is based on the space charge modulation effect introduced to the multiplication process by the input signal. Computed results show that the beat frequency output power is linearly dependent upon the signal power and self oscillating power. Also the strong dependence of the output power with respect to the diode negative resistance is found and it turns out that the larger the negative resistance, the stronger the beat frequency output power. Experimental results show a good agreement with the theoretical values. Calculated conversion gain is about -0.4[db] at 10[GHz] and the experimental value shows -6.2[db] below this value. This difference between the theoretical and the experimental values is considered to be the results of the ineffective injection of signal power.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1147-1154
• /
• 2005

In this paper, we propose some PAPR(Peak to Average Power Ratio) reduction methods using WHT(Walsh Hadamard Transform) to reduce high PAPR generated in OFDM system because of multi carrier modulation. These proposed methods are the methods which has additional PAPR reduction performance without a loss of bandwidth efficiency and a large increment of calculation complexity than common PAPR reduction methods by combining the WHT with some common methods. In this paper, we propose two PAPR reduction methods made by combining a SLM(Selective Mapping) and DSI(Dummy Sequence Insertion) with a WHT. From simulation result, we can find that the PAPR reduction methods using a WHT can get about 1 dB additional PAPR reduction performance than common PAPR reduction methods; they are SLM and DSI. And, because our proposed methods have not only PAPR reduction effect, but also frequency diversity effect, more stabile data transmission is possible in nonlinear HPA and multipath fading channel.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.5
• /
• pp.368-374
• /
• 2016

This paper presents constructing transmitter and receiver by using a direct sequence spread spectrum techniques to DPSK (Differential Phase-Shift Keying) scheme in underwater acoustic communication. Since DPSK signal can be demodulated if the receiver knows only the phase difference between the adjacent bits, DPSK receiver structure has the advantage of being simplified. In the conventional receiver, two adjacent symbols of transmitted signal before despread are passed to the transition correlator that detects data by comparing maximum correlation outputs. At this time, the error for maximum value of the correlator output may increase because of low SNR (Signal to Noise Ratio) or high Doppler shift frequency according to the underwater channel. In this paper, we propose a method for accurate detection result using the width as well as the magnitude among outputs produced by the correlator. The performances of the proposed method was evaluated by simulation and lake trial data.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.18-26
• /
• 2006

In this paper, we compare the performance of three representative STBC schemes, Alamouti's, Tarokh's and quasi-orthogonal schemes under cellular mobile environments when they are applied to the OFDM system. We first study the encoding algorithms of the STBC schemes along with the development of adequate demodulation algorithms. The OFDM parameters are selected by considering the Wibro system and adequate modulation schemes are assigned for each STBC schemes according to the transmission rate from 2bps/Hz to 4bps/Hz. The STBC-OFDM systems employ Walsh orthogonal codes covered along the frequency domain in order to estimate the channel information for different transmit antennas. We finally compare the performance of the STBC-OFDM systems according to the transmission rate through computer simulations in various mobile channel environments.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.2
• /
• pp.54-61
• /
• 2000

This paper presents the performance evaluation of channel estimation algorithm using RLS algorithm lot W-CDMA reverse link over Rayleigh fading channels. By obtaining BER(Bit Error Rate) performance through computer simulations, the RLS(Recursive Least Square) algorithm is compared with the existing WMSA(Weighted Averaging)(K=1,3) and constant gain algorithm. The channel structure, modulation and pilot patterns are applied to the ARIB (Association of Radio Industries and Business) and 3GPP (3rd Generation Partnership Project) ITU-R proposal for the IMT-2000. The BER performance of RLS algorithm with linear interpolation is similar to that of WMSA(K=1) and slightly superior to that of constant gain algorithm at low Doppler frequencies. Also, RLS algorithm performance is better than that of the WMSA(K=1,3) and constant gain algorithms about 4dB at BER=2.0$\times$$10^{-2}$ and Doppler frequencies $F_D$=320Hz. With increasing Doppler frequency, therefore, the BER performance of RLS algorithm with linear interpolation is superior to WMSA(K=L.3) and constant rain algorithms.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.4
• /
• pp.1-9
• /
• 2007

Linearity is the one of the most important features for analog-optic transmission system. In our research, the available bandwidth for the feed-forward compensation circuit is enhanced by using a 180 hybrid coupler in the circuit. The bandwidth having the decreased 3rd-order intermodulation distortion(IMD3) over 10 dB is extended over 200 MHz with the center frequency of 1.6 GHz. We performed an efficient bandwith measurement for the feed-forward compensation system, which uses the network analyzer instead of the traditional measuring system that uses two RF signal generators and the spectrum analyzer. We identify the usefulness of this method from experimental results. In this study, we used cheap digital-purpose laser diodes for economical aspect, which proves the efficiency of the proposed analog system. The spurious-free dynamic range is improved about 6 dB/Hz.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.156-162
• /
• 2013

In the communication between satellite and ground station, data rate can be determined from the data volume and required transmission time. Increasing data rate can be limited according to the available bandwidth. For the reason, it has been popularly studying on high spectral-efficient modulation scheme in large volume data application such as digital video broadcasting service. This paper presents the conceptual design of UHRIT broadcasting in GEO-KOMPSAT-2A (GK2A) mission by using DVB-S2 standard. Based on the recently determined data rate, UHRIT bandwidth was calculated at the various modulation schemes and code rates of DVB-S2 standard. Receiving performance of global user station was also evaluated thorough link analysis by considering that user station is located at the edge of beam coverage. Finally, maximum data rate was analyzed in a situation that COMS HRIT bandwidth should be alternatively applied for UHRIT downlink.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.05a
• /
• pp.458-463
• /
• 2005

OFDM communication system is effective for the high data rate transmission in the frequency selective fading channel. Since OFDM has high PAPR, OFDM signal may be distorted by the nonlinear HPA. In this paper, we propose an combined SLM and PTS method for reducing the PAPR in OFDM communication system. Proposed method increased some system complex in comparison with exiting method. But we made sure of high efficiency in the case of reducing the PAPR. As a result of using the 16-QAM modulation and increasing the carrier number in the SLM, PTS method and the SLM-PTS combined method, SLM-PTS combined method is more an effective method of reducing 3.5 dB PAPR than exiting OFDM system when this method is M, L=3, D=128, 256 in 10-3 BER.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.340-343
• /
• 2007

OFDM (Orthogonal Frequency Division Multiplexing) system is robust to frequency selective fading and narrowband interference in high-speed data communications. However, an OFDM signal consists of a number of independently modulated subcarriers, which can give a large PAPR (peak-to-Average Power Ratio) when added up coherently. In this paper, we propose a new PAPR reduction method using Adaptive Sine Soft Clipping (ASS Clipping) to solve the PAPR problem. The proposed method reduce the PAPR and out-of-band spectrum by cutting down high frequency components. From computer simulation results, we analyze the PSD (Power Spectral Density) and BER (Bit Error Rate) performance as well as PAPR reduction performance when the ASS Clipping method is applied to OFDM system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.5
• /
• pp.581-591
• /
• 2016

RFID(Radio Frequency IDentification) is a key technology in ubiquitous computing and is expected to be employed in more fields in the near future. Nevertheless, the RFID system is vulnerable to attacks by eavesdropping or altering of the messages transmitted in wireless channels. In 2013, Oh et al. proposed a mutual authentication protocol between a tag and a reader in RFID systems. Their protocol is designed to resist location tracking for privacy protection. However, all tags and readers use only one network-wide key in their protocol and tags are usually vulnerable to physical attacks. We found that their protocol is still vulnerable to tag/reader impersonation attacks and location tracking if an attacker obtains the network-wide key from a tag. In this paper, we propose a security improved authentication protocol for privacy protection in RFID systems. In addition, we demonstrate that the proposed scheme is efficient in terms of computation and communication costs.