• The Journal of the Acoustical Society of Korea
• /
• v.17 no.8
• /
• pp.103-109
• /
• 1998

디지털신호의 변조에는 기본적으로 진폭 편이 변조(ASK: Amplitude-Shift Keying), 주파수 편이 변조(FSK: Frequency-Shift Keying), 위상 편이 변조(PSK: Phase-Shift Keying) 등의 세 가지 방법이 있다. 본 논문에서는 표본클록 합성계수 방식에 관한 이론을 고찰하고, 클록초기치 누적방식의 DDFS를 이용하여 위에서 언급한 변조방법을 실현할 수 있는 주파수 도약 대역 확산 통신에 적합한 변조기를 구현하였다. 또한, 합성된 출력주파수 의 정현파형에 대한 스펙트럼 분석과 PN(Pseudo Noise) 부호를 사용한 순시적인 주파수 도 약 상태, 위상제어의 가능성 등을 확인한 결과 실험으로부터 다음과 같은 결과를 얻었다. 첫 째, 합성된 출력주파수는 주파수 Index에 따라 기준주파수에 정확히 정수배가 되며, 둘째, 합성된 정현파형의 스펙트럼으로 기본파와 여러 고조파의 크기를 비교하여 본 결과 50[dB] 이상의 차이가 남으로서 고조파 성분들이 상당히 감소되었음을 확인하였고, 셋째, PN 코드 를 사용하여 순시적인 주파수 도약 상태를 확인하여 본 결과 스위칭 시간이 빠르기 때문에 주파수 도약 특성이 뛰어남을 알 수 있었으며 또한, 누산기의 set/reset 상태를 변화시킴에 따라 위상이 제어됨을 입증하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.6
• /
• pp.599-607
• /
• 2004

In this paper, using phase locked loop(PLL) synthesizer, we introduce a novel but simple and low cost frequency modulation(FM) circuit of a flat peak frequency deviation fur modulation signal whose frequency covers from outside to inside of the loop-bandwidth of PLL. The FM circuit was basically designed to compensate an amount of feedback of the loop filter in PLL. The circuit also includes the capability of the adjustment of peak frequency deviation and of blocking the intereference with the loop filter. The designed circuit was successfully implemented and showed the flat frequency deviation as expected in the design. In addition, the novel measurement method of the wideband FM modulation index is suggested verified With the suggest measurement, it can be successfully shown the designed circuit has the expected frequency deviation.

• Korean Journal of Optics and Photonics
• /
• v.3 no.1
• /
• pp.27-36
• /
• 1992

Frequency modulation spectroscopy of the super-cavity, of which finesse is app. 40,000 has been demonstrated by using a sigle mode He-Ne laser. In-phase and quardrature components of frequency modulation signals (FM signal) were obtained by using the 1.5 MHz-driven-electrooptic phase modulator. The vector locus of the FM signa in the phase space, which is consisted of in-phase and quardrature components of the FM signal, was observed and analyzed for the dependence of FM signal upon the phase of the reference signal of a phase-sensitive-detector. According to rotating the phase of the reference signal, the vector locus was observed to rotate with the same phase angle as the reference signal. The in-phase component of the FM signals will be used to stabilize the frequency of the He-Ne laser to the resonant frequency of the super-cavity.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.3
• /
• pp.221-228
• /
• 2000

본 논문에서는 전기·전자 장비의 활용이 확대되면서 더욱 더 관심이 고조되고 있는 전자파장해에 대하여 논하고자 한다. 기존 PWM 직류전원장치에서는 회로 소자 및 배치에 따른 기생소자와 갑작스런 전압/전류의 변화에 의해 전자파장해를 발생시킨다. 본 논문에서는 PWM 직류전원장치에서 발생하는 전자파장해의 특성을 고찰하고, 출력전압 조절에 큰 영향을 주지 않는 범위내에서 PWM 제어가 가능하면서 두 개의 고정된 스위칭주파수로 연속적으로 변조하는 Bi-FM 변조제어방식과 랜덤하게 변화하는 스위칭주파수 변조제어방식을 이용하여 전도잡음을 저감시킬 수 있는 변조방식을 논할 것이다. 또한 이들 변조 방식의 주파수 스펙트럼 특성을 비교·분석하여 설명하고, 제어기를 분석·설계하여 실험을 통하여 스위칭주파수와 그 고조파 주파수들의 측대역으로 전도잡음이 분산되고 전도잡음의 피크치가 감소됨을 확인하고자 한다.

• Journal of Biomedical Engineering Research
• /
• v.21 no.4
• /
• pp.345-351
• /
• 2000

This study is to dvelop a radiotelemetry system to transmit and receive ECG (electrocardiograph) and event signals by using the frequency division multiplexing(FDM) technique. ECG signal sensed by the electrodes is amplified and added to the event signals acting in different frequency range for lead-off, nurse call and low level battery by using FDM. The sub-carrier oscillator using Colpitts circuits and main carrier frequency which is multiplied is frequency modulated by this superhetrodyne technique, and demodulated from the compose IF signal through the quadrature demodulator. A pulse counter demodulator and filtering circuits extract the original ECG and event signals.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.450-457
• /
• 2003

In this paper, we studied the effect of asymmetrical 3rd order IMD of power amplifier due to changes in modulation frequency on IMD cancellation performance. The phase extraction method for determining asymmetric rate for phase distortion of IMD is proposed and the phase difference between lower and upper 3rd order IMD is measured by this method. The phase compensation circuit to decrease the phase difference is also designed and fabricated. From the measurement results using the phase compensation circuit applied to 5 W RF power amplifier fur PCS applications, the 3rd order IMD cancellation performance can be achieved up to 2-tone spacing 1.5 MHz (phase difference within 10$^{\circ}$).

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.5
• /
• pp.52-57
• /
• 1999

It is very important to design of QAM modulator of high spectral efficiency for high speed data transmission. In this paper, typical 16-QAM modulator is designed by modification design of DDFS(direct digital frequency synthesizer). DDFS generates sinusoidal waveform digitally to the frequency setting word. Phase modulation is accuratly made by control of a generated phase increment value and amplitude modulation is accomplished in the D/A converter output by control of amplitude level. For the suppression of harmonics and glitch, dual-structured DDFS is studied to improve the spurious characteristics. P-Spice is used for design and simulation in mixed mode. Also we can get the satisfactory results of designed 16-QAM modulator from the constellation output.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.47-50
• /
• 2010

최근 3D HDTV (3-Dimensional High Definition Television)에 대한 연구가 활발히 진행되고 있다. 국내에서도 3D HDTV 방송 서비스를 위하여 기존의 ATSC (Advanced Television Systems Committee) 8-VSB (8-Vestigial Side Band) 시스템을 수정하려는 연구가 진행되고 있다. 그 중에서도 프레임 생성 과정에서 프레임 헤드 부분에 PN (Pseudo-Noise)심볼을 사용하는 새로운 시스템의 개념을 제안하고, 이 시스템을 수정된 ATSC 시스템이라 부를 것이다. 수정된 ATSC 시스템은 기존 ATSC 8-VSB 시스템에서 사용되던 VSB 변조방식을 사용한다. 본 논문에서는 수정된 ATSC 시스템에 적용 가능한 반송파 주파수 복구 방식을 제안한다. 제안된 반송파 주파수 복구 방식은 Fitz 알고리즘을 사용하는 거친 주파수 복구부와 간단한 PN심볼 상관 알고리즘을 사용하는 미세 주파수 복구부로 구성된다. 그리고 진폭만을 변조하여 사용하는 VSB 변조 방식의 경우 심볼 정보가 동위상 채널에만 존재하고, 직교위상 채널은 단순히 동위상 채널의 힐버트 변환된 값에 지나지 않는다. 그러므로 VSB 변조된 심볼은 QAM 변조된 심볼 처럼 일정한 배열을 가지지 않고, 반송파 주파수 옵셋에 더욱 민감하게 된다. 이를 극복하기 위하여 수신된 PN심볼에 대한 위상 보정 과정을 수행하고, 이 과정은 수정된 ATSC 시스템의 반송파 주파수 복구 시 성능을 향상 시킨다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2426-2438
• /
• 1994

In this paper we present for the first time the electric circuit model for direct frequrncy modulation(FM) response of the conventional distributed-feedback(DFB) semiconductor laser diodes. Especially, in this paper, the proposed model includes not only the carrier density modulation effect, but also the temperature modulation effect determining the DFM characteristics of DFB characteristics of DFB semiconductor lasers. The DFM response due to injection current modulation was obtained as a function of modulation frequency from DC to a few GHz. The circuit model representing the temperature modulation effect is obtained from the structure of DFB LD chip and the simulation results are compared with the published experimental results. The circuit model representing the temperature modulation effect is obtained from the structure of DFB LD chip and the simulation results are compared with the published experimental results. The circuit model representing carrier density modulation effect is obtained from the rate equations of DFB lasers and the simulation results are compared with the results that were obtained by the conventional numerical analysis approach. The results showed good agreements.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1023-1030
• /
• 2023

FMCW LiDAR system with robust target detection capabilities even under adverse operating conditions such as snow, rain, and fog is addressed in this paper. Our focus is primarily on enhancing the performance of FMCW LiDAR by improving the characteristics of the frequency-modulated laser, which directly influence range resolution, coherence length, and maximum measurement range etc. of LiDAR. We describe the utilization of an unbalanced Mach-Zehnder laser interferometer to measure real-time changes of the lasing frequency and to correct frequency modulation errors through an optical phase-locked loop technique. To extend the coherence length of laser, we employ an extended-cavity laser diode as the laser source and implement a laser interferometer with an photonic integrated circuit for miniaturization of optical system. The developed FMCW LiDAR system exhibits a bandwidth of 10.045GHz and a remarkable distance resolution of 0.84mm.