• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.1
• /
• pp.11-19
• /
• 1992

This paper proposes a reduced order method which reduces passband error by changing controllability and observability gramian based on weighted functions in the linear time invariant system. In the case that the 4-order model is the reduced to 3-order model in the low-pass filter, the QEI in the proposed method is improved to 6.15724 compared to 10.16464 in the balanced realization method and the sensitivity is improved to 5.45962 compared to 7.790568. The frequency property curves show that the proposed method is superior to the balanced realization method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8C
• /
• pp.758-766
• /
• 2007

High peak-to-average power ratio(PAPR) is one of serious problems in the orthogonal frequency division multiplexing(OFDM) systems. This paper proposes a PAPR reduction technique for limited feedback multiple input multiple output(MIMO) OFDM systems. The proposed method is based on the null space of the MIMO channel where a dummy signal is made in the channel's null space and then, subtracted from the original signal to reduce the PAPR. First, we show that a problem occurs when the existing method is directly applied to limited feedback MIMO case. Then, a weight function for the dummy signal is proposed to mitigate the degradation of the receiver performance while still reducing PAPR significantly. The weight function is derived from a constrained nonlinear optimization problem to minimize the mean square error between the received signal and its ideal signal. Simulation results shows that the proposed technique provides about 2.5dB PAPR reduction with 0.2dB bit-error probability loss.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.113-116
• /
• 1999

신호 대 잡음비가 낮은 환경에서 센서 어레이에 입사된 입력 신호 사이의 지연시간 추정(Time Delay Estimation, 이하 TDE)은 높은 분해능이 요구된다. 본 연구에서는 높은 분해능의 TDE를 구하기 위해 상호상관함수(Cross-Correlation)에 평균 차 함수(Average Magnitude Difference function, AMDF)의 역수를 가중한 MCC (Modified Cross-Correlation)알고리즘을 제안한다. 모의신호를 사용한 수치 시뮬레이션 실험으로 종래의 AMDF, Cross-Correlation 알고리즘과 본 연구에서 제안한 MCC 알고리즘의 분해능을 비교 분석하였다 각 알고리즘의 TDE 결과에 대해 STFT(Short Time fourier Transform)에 의한 시간 주파수 해석을 한 결과 MCC알고리즘을 사용하여 TDE 분해능이 향상되었음을 보고한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.3
• /
• pp.288-296
• /
• 1992

This paper describes an improved 2D QPS(quadrature polar separable) filter design and its applications to texture processing. The filter kernel pair consists of the product of a radial weighting function based on the finite PSS (prolate spheroidal sequences) and an exponential at tenuation function for the orientational angle. It is quadrature and polar separable in the frequency domain. It is near optimal in the energy loss because we let the orientational angle function approximate the radial weighting function. The filter frequency characteristics is easy to control as it depends only upon the design specifications such as the bandwidth, the directional angle, the attenuation constant, and the shift constant of the central frequency. Some applications of the filter in texture processing, such as the generation of the texture image, the estimation of orientation angles, and the segmentations for the synthetic texture image, are considered. The result shows that the filter with the wide bandwidth can be used for the generation of discrimination of the strong orientational textures and the segmentation results are good.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.230-236
• /
• 2013

This paper presents the numerical calculation for input impedance of a conductor located in the loss media by using the program with MATLAB. The input impedances of the conductor were numerically calculated with the moment of method. To increase an accuracy of results, the Galerkin's method which both the basic function and the weight function are the triangle function was applied. And by applying the modified image method, image sources of the conductor located in air were considered. According to the comparison between the current distributions at the conductor which were calculated with the MATLAB program and the NEC program, the reliability of the self-made program with MATLAB was obtained. In case of the conductor located in soil, which length are 1 m and 2 m, the input impedance were simulated as a function of both a conductivity and a frequency. Finally, input impedances and phases of the conductor located in soil were measured, and those results were compared with simulated results which calculated under the same conditions.

• Journal of KSNVE
• /
• v.10 no.2
• /
• pp.247-253
• /
• 2000

The evaluation of the ride quality had been performed by the subjective method before ISO2631(International Organization for Stadard 2631) and BS6841(British Standard 6841) was precented, but many research programs have been performed by the objective method after that. On this study, the ride quality was evaluated related with the objective method which considered the vibration which the human body feels on the driver's seat while driving on the road. In particular, we made the shock absorber nonlinear model and also selected the suitable shock absorber in the part of the vibration which the human body feels into the simulation. The shock absorber of suspension was dealt with 3 cases respectively with the front wheel and rear wheel. The vibration of the car driving on the road can be transferred to the wheel, the suspension, the vehicle body, the seat and the human body. The signal which was gained from the seat(hip) and the floor(foot) of the human body was changed to the vibration signal which the human body felt through using the frequency weighting function. And then the performance of the shock absorber was calculated through the statistic processing.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.4
• /
• pp.53-61
• /
• 2000

능동 제어기를 설계하기 위해서는 제어대상 구조물의 수학모델의 구해야한다. 그러나, 무한차원의 구조물에 대하여 정확한 모델을 구하는 것은 불가능하므로 유한차원인 저차원화된 모델을 사용하여 제어기를 설계한다. 그러나, 실제 구조물과 저차원화된 모델사이의 오차에 의하여 제어기의 성능이 저하가 되면 제어기와 구조물의 상호작용, 지진과 같은 오란 등의 불확실성, 지진시 구조물의 동적 특성 변화로 인하여 제어기의 성능이 더욱 저하가 된다. 이러한 저하 요인은 제어기 설계시 요구되는 구조물의 수학모델에 대한 불확실한 요소로 작용하기 때문에 제어성능의 저하를 일으키며 응답의 불안정을 유발하기로 한다. 본 연구에서는 질량형 능동제어기(AMD)가 설치된 3층 건물 모형의 모델 오차에 관한 불확실성을 반영한 강인제어기법을 적용하여 제어성능과 안정성을 실험을 통하여 분석하였다. 강인제어 기법인 $\mu$ 합성법에 요구되는 여러 가지 가중함수인 주파수필터는 건물과 AMD의 특성, 모델 오차, 제어율과 AMD 성능의 , 측정잡음 및 지진외란의 특성 등을 고려하여 정량적으로 선택되었다. $\mu$합성법에 의하여 제어기를 설계하였으며 강인성을 비교하기 위하여 불확실성이 고려되지 않는 LQG 기법에 의한 제어기를 선택하였다. $\mu$합성법은 규정된 불확성에 대하여 제어의 강인성을 가지므로 동적특성이 바뀐 건물모형에 관한 강인성을 LQG 기법에 의한 제어성능과 비교하였다. 그 결과 동적특성이 변화된 건물에 대하여 $\mu$합성법만이 제어의 효율성이 유지되는 강인성을 나타내었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.1
• /
• pp.20-25
• /
• 2005

The thickness, loading, and broadband noise generated from the trailing edge of the UH-1H main rotor are numerically compared each other. The Kocureck and Tangler's prescribed wake model is adopted to represent the wake geometry during the hovering motion. Three tip Mach numbers of $M_{T}$ = 0.2, 0.4, and 0.8, are selected to analyze the effects of different tip Mach numbers. At $M_{T}$ = 0.8, in considering the A-weighting and audible frequency band, the random noise is smaller than the tonal noises such as the thickness and the loading noise which have the low frequency characteristics. Especially most of the random noise frequency spread on the ultrasound region. On the other hand, below $M_{T}$ = 0.4, the band of random noise moves to the audible frequency region, and the random noise becomes larger than the tonal noise. It turns out that the random noise analysis of the rotor should be necessary at low speed operating condition.

• The Journal of the Korea Contents Association
• /
• v.9 no.7
• /
• pp.19-26
• /
• 2009

This paper presents an approach to classify normal and ventricular tachycardia/fibrillation(VT/VF) from the Creighton University Ventricular Tachyarrhythmia Database(CUDB) using the neural network with weighted fuzzy membership functions(NEWFM) and wavelet transforms. In the first step, wavelet transforms are used to obtain the detail coefficients at levels 3 and 4. In the second step, all of detail coefficients d3 and d4 are classified into four intervals, respectively, and then the standard deviations of the specific intervals are used as eight numbers of input features of NEWFM. NEWFM classifies normal and VT/VF beats using eight numbers of input features, and then the accuracy rate is 90.1%.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.389-392
• /
• 2000

본 연구에서는 1, 2단자쌍 회로망의 임피던스 정합회로를 간단하고 빠르게 구할 수 있는 방안을 개발하였다. 우선 회로망의 전체 전달함수를 F 행열로 부터 계산하고, 이를 이용하여 양단의 부하저항 및 정합회로가 포함된 각각의 단자의 입출력 임피던스를 구하였으며, 이 식으로부터 정합용 소자의 정확한 값을 계산하였다. 본 연구의 타당성을 검증하기 위해 CDMA용 소자로 널리 사용되는 중간주파수 대역 withdrawal 가중형 SAW 필터에 본 연구의 결과를 적용하여 임피던스 정합 전후의 특성변화를 시뮬레이션과 실험을 통하여 동시에 확인하였다 그 결과 85.38 MHz의 중심주파수에서 비대역폭이 $1.2\%$, 삽입손실이 29dB, VSWR이 80인 필터를 본 연구방법을 이용하여 정합 한 경우, 각각 $1.8\%$, 9dB, 3으로 향상됨을 시뮬레이션과 실험을 통해 확인하였다. 본 연구결과는 SAW 디바이스의 정합에 매우 용이하게 이용될 수 있을 뿐만 아니라 일반적인 1, 2단자쌍 회로망의 임피던스 정합에도 널리 사용될 수 있다