• Journal of the Korean Chemical Society
• /
• v.60 no.1
• /
• pp.28-33
• /
• 2016

The spiropyran is a typical material having photodegradation properties in the process of photochromism. The spiropyran has been utilized in various applications such as optical switch, optical memories, and biosensor because of its remarkable stability, fast responsive time, stronger color change, and photo-induced controllability. However, the spriropyran is photodegraded by the repetitive optical irradiation. The photodegradation of spiropyran have been investigated by using UV-Visible spectroscopy, nuclear magnetic resonance (NMR), and Raman spectroscopy. Herein, the properties of spiropyran were characterized by using terahertz time-domain spectroscopy (THz-TDS) in the terahertz frequency region. In terahertz region, the measured absorbance of spiropyran was increased due to the photodegradation induced by the repetitive UV irradiation. The absorbance tendency of spiropyran in the terahertz frequency region was compared with that in the visible region, and they were completely opposite to each other.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.9
• /
• pp.1015-1022
• /
• 2007

In this paper, we proposed a wideband design of planar inverted-F antenna(PIFA) using two-layer, patches and modified ground structure. The antenna consists of two layer patches with common feed and modified ground plane to control resonance frequency and antenna input impedance. The measured bandwidth is 1,492 MHz(BW: 67.7 %, 1,457${\sim}2,949$ MHz) for VSWR<2, and 1,170 MHz(BW: 21 %, 4,970${\sim}$6,140 MHz) for VSWR<2.5. It covers service bands of DCS1800, DCS1900, UMTS(WCDMA), WiBro, WLAN(IEEE 802.11b), satellite DMB. WLAN(IEEE 802.11a) in Korea and radiation patterns shows constant figure with frequency change.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.368-371
• /
• 2020

In this paper, we propose a linear tapered slot rectifying antenna for a portable UHF-band RFID system. Since the proposed rectifying antenna does not use a dielectric substrate, the planar antenna is implemented with a thin metal thickness. The rectifier circuit converts input RF power into output DC voltage using a voltage doubler circuit based on two anti-parallel schottky diodes. The rectifying antenna is integrated by the voltage doubler circuit into a linear tapered slot antenna. For conjugate impedance matching of the rectifying circuit and the linear tapered slot antenna, the source-pull method was utilized by adjusting the angle of the tapered slot and the length of the antenna feed line. The proposed antenna prototype has been verified with the electrical and radiation characteristics through RF-DC conversion and far-field radiation test in open space measurement environment. Finally, the proposed antenna is realized to 0.23-wavelength (75 mm) and 0.18-wavelength (60 mm) at 915 MHz center frequency.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.63-64
• /
• 2013

In this paper, a design method for a dual dipole antenna for an operation in the frequency band of 470-806 MHz for indoor digital TV (DTV) is studied. The proposed antenna is composed of two planar dipoles connected by parallel strip line, and the antenna is fed by a microstrip line. By employing different lengths of dipoles, a broadband characteristics is obtained, and the antenna is size-reduced by bending both ends of the longer dipole. The effects of each parameters on the antenna performance are examined by simulation, and the parameters are optimized for the DTV use. A prototype antenna with optimized parameters for the indoor DTV use is fabricated on an FR4 substrate and tested experimentally. The experimental results show that the frequency band for a VSWR < 2 ranges 458-864 MHz (61.4%, bandwidth 406 MHz, 1.89:1), and it corresponds fairly well with the simulated band 448-868 MHz (63.8%, bandwidth 420 MHz, 1.94:1).

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.1
• /
• pp.296-305
• /
• 2000

In this paper, we propose the method of embedding the encrypted digital watermark in quantization coefficient when we encode the image data in the process of JPEC. The proposed method is as following. After a DCT coefficient of each block is quantized, we arrange the quantization coefficient as on dimension with a zigzag scan and replace each block. By applying even-odd feature of frequency of the encrypted watermark to a quantization coefficient of some fixed domain of replaced each block and embedding it, we obtain the compressed image data by encoding after placing it in the order prior to replacement. The advantages of the proposed method here are as follows: We can embed many information keeping a secret as much as possible by using the algorithm of block replacement. We can control the amount of embedding of each use, as we embed the encrypted information by selecting some fixed domain of a quantization coefficient, we can fix the embedding data regardless of the image and the value of quantization. We verified the results by experiments and analyzed the efficiency of them in comparison with the former study.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.822-832
• /
• 1994

DSC-HDTV image compression algorithm removes spatial, temporal, and amplitude redundancies of an image by using transform coding, motion-compensated predictive coding, and adaptive quantization, respectively. In this paper, leak processing method which is used to recover image quality quickly from scene change and transmission error and adaptive quantization using perceptual weighting factor obtained by HVS are proposed. Perceptual weighting factor is calculated by contrast sensitivity, spatio-temporal masking and frequency sensitivity. Adaptive quantization uses the perceptual weighting factor and global distortion level from buffer history state. Redundant bits according to adaptation of HVS are used for the next image coding. In the case of scene change, DFD using motion compensated predictive coding has high value, large bit rate and unstabilized buffer states since reconstructed image has large quantization noise. Thus, leak factor is set to 0 for scene change frame and leak factor to 15/16 for next frame, and global distortion level is calculated by using standard deviation. Experimental results show that image quality of the proposed method is recovered after several frames and then buffer status is stabilized.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.124-130
• /
• 2008

In order to fabricate a modified poly (lactic acid) (PLA) for applications requiring high melt strength, a PLA has been irradiated in the presence of functional monomer of glycidyl methacrylate (GMA). Samples were prepared with various contents of GMA and irradiation dosages, and were characterized by observing their thermal and melt viscoelastic properties and gel faction. The complex viscosity and storage modulus of the modified PLA without GMA were lower than those of the original PLA. Those of the modified PLA decreased with increasing dosage. In the case of the modified PLA containing 0.1 phr or 0.3 phr of GMA, their changing tendency with dosage was similar to the irradiated PLA without GMA. However, the 5 kGy irradiated PLA containing 0.5 phr of GMA showed the greatly enhanced complex viscosity and storage modulus, which were about 3 and 10 times higher than those of the original PLA at a frequency of 0.1 rad/s, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.7
• /
• pp.768-773
• /
• 2012

A branch-line hybrid using microstrip artificial transmission lines(ATLs) with slotted-triangular patches is proposed. The proposed artificial transmission line is compact in structure as well as easy to adjust the characteristic impedance and electrical length of equivalent transmission line by changing the slot's parameters; hence, it is useful for miniaturizing conventional transmission lines. The designed branch-line hybrid, because of the use of the right angled isosceles triangular shaped artificial transmission lines as building blocks, has no useless empty space, and hence optimally miniaturized. A fabricated 3 dB branch-line hybrid shows the coupling variation of ${\pm}0.5$ dB and the phase difference between two output ports of $91^{\circ}{\pm}4^{\circ}$ within 15 % bandwidth at 2.45 GHz center frequency. The size of proposed branch-line hybrid is only 38% of the conventional branch-line hybrid.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.3
• /
• pp.230-239
• /
• 2009

In this paper, we propose a novel on-glass antenna for FM radio reception in a recreation vehicle(RV). We use a multi-loop structure that takes advantage of a broad matching bandwidth and a high vertical radiation gain by efficiently utilizing a given space of a quarter glass in spite of the simple planar structure. Transparency of the antenna is also improved by adjusting the stripline widths based on the induced current distributions. The proposed antenna is printed on a quarter glass of a commercial vehicle and antenna performances such as the return loss and the gain are measured in a semi-anechoic chamber. The result shows the average gain of -9.67 dBi along the bore-sight direction($\theta=90^{\circ}$, $\phi=270^{\circ}$) in the FM radio band(80$\sim$l10 MHz), which is higher than a commercial monopole typed on-glass antenna($G_{ave}$=-12.49 dBi) and micro-antenna($G_{ave}$=-19.24 dBi) mounted on the roof of the RV.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.8
• /
• pp.646-652
• /
• 2017

The effect of plasma on mono-static radar cross section under atmospheric pressure is demonstrated when the dielectric barrier discharge actuator has plasma layer. The volume of plasma layer is increased by using planar array of electrodes. Because the incident wave has electric field which is perpendicular to the electrode array, the undesired effect on radar cross section caused by structure of plasma actuator is minimized. In experiments, mono-static radar cross section is measured at the frequencies from 2 GHz to 25 GHz. The generated plasma reduces the radar cross section at frequencies above 18 GHz, and the amount of reduction reaches to 8 dB in maximum. The reduction can be controlled by changing the peak-to-peak voltage from high voltage generator. The result shows the possibility of plasma as a flexible radar cross section controller.