• Geophysics and Geophysical Exploration
• /
• v.19 no.2
• /
• pp.84-90
• /
• 2016

The validation of performance test for newly developed or old-used sensor is very important in the earthquake monitoring and seismology using earthquake data. Especially the frequency response of the sensor is mainly used to correct the earthquake data. The technique of the calculation of phase and amplitude with Hilbert transformation for earthquake data that is filtered with band limited frequency in time domain is applied to calculate the frequency response of the sensor. This technique was tested for the acceleration sensors, CMG-5T of 1g and 2g installed on the vibration table at the laboratory and we could obtain satisfactory result. Tohoku large earthquake in 2011 observed at the station SNU that has accelerometer, ES-T and seismometer, STS-2 operated by KIGAM was also used to test the field data applicability. We could successfully get the low frequency response of broad band sensor, STS-2. The technique by using band limited frequency filter and Hilbert transformation showed the superior frequency response to the frequency spectrum ratio method for noisy part in data.

• Explosives and Blasting
• /
• v.19 no.3
• /
• pp.67-74
• /
• 2001

발파진동이 건설 환경공해의 한 요인으로서 심각한 사회문제로 대두되자, 이 부분에 대하여 여러 가지 연구활동이 각 관련기관 및 단체에서 이루어져 왔다. 기존의 대부분이 안전 한계치를 제시하는 과정에서 통계처리를 이용한 회귀분석 등이 이용되었으나, 최근에 즈음하여 진동파형 및 주파수 분석 등을 통한 진동 특성을 연구하거나, 발파 진동에 의한 구조물의 응답특성에 관한 연구 등이 병행하여 수행되고 있다. 지진하중에 대한 내진설계 분야에서 구조 동역학적인 개념이 도입 된지 이미 오래지만, 발파공학의 분야에 접목시키기 위한 노력은 최근에 들어와서 보다 활발히 진행되고 있다. 이러한 시도에서 응답스펙트럼은 가장 기초적이며 필수적인 사항 중의 하나라고 생각되며, 본 고찰에서는 이러한 응답스펙트럼의 작성에 대한 기본적인 이해와 몇가지 작성 예를 들어 그 의미를 상기 해보고자 하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2017.11a
• /
• pp.19-20
• /
• 2017

본 논문은 사용자제작콘텐츠 (User Created Contents, UCC)를 이용한 가상현실 (virtual reality, VR) 음향 재구성을 위한 스마트폰의 주파수응답 정규화에 관한 연구이다. 서로 다른 스마트폰들로 취득한 음향들을 연결할 때, 부자연스러운 음향이 발생하며, 이것은 주로 스마트폰별로 다른 주파수 응답에 기인한다. 이러한 문제를 해결하기 위하여 스마트폰의 주파수응답을 정규화 하는 과정이 필요하며, 본 연구에서는 심층신경망 (deep neural network)을 이용하는 방법을 제안한다. 심층신경망의 입력은 처리하고자 하는 스마트폰 음향의 스펙트럼이고 출력은 이것과 기준 스마트폰 음향의 스펙트럼과의 비율이다. 실험결과, 서로 다른 스마트폰으로 취득한 음향신호가 연결되었을 때, 객관적 및 주관적 평가를 통해 음향의 자연성이 개선됨을 확인 하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.8
• /
• pp.589-597
• /
• 2002

In this paper the nonstationary response of accelerating vehicle is firstly obtained by using nonstationary road roughness model in time domain. To get the result of nonstationary response in frequency domain, the maximum entropy method is used for Processing nonstationary response of vehicle in frequency domain. The three-dimensional transient maximum entropy spectrum (MES) of response is given.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.1
• /
• pp.9-17
• /
• 2005

We studied the characteristics of impedance and electromechanical coupling coefficient in ZnO and AIN thin films by using resonance frequency spectrum method. The response peak of impedance decreased with the decrease of thickness of piezoelectrics, the number of mode of response peak decreased with the decrease of substrate thickness. An error of Kt² estimated from input Kt² increased as the thickness of piezoelectrics decreased and the thickness of substrate increased. Also, the error was increased in case of a large acoustic impedance of substrate. It was found that the composite resonator operating in optimized condition could be designed through the resonance frequency spectrum analysis of composited resonator consisted of piezoelectric thin film and substrate.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.4
• /
• pp.254-262
• /
• 2015

Parametric study on submerged body shape of an oscillating hemisphere point absorber was conducted to predict the optimal relation between radius and draft of the body. As an additional damping due to power takeoff system, the optimal damping same as wave radiation damping was applied to the PTO system to produce the maximum wave power. Body response spectrum and power spectrum were obtained for various peak frequencies on wave spectra. It was found that the maximum power can be generated when the peak frequency of available wave power was 20% greater than that of wave spectrum.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.1
• /
• pp.63-76
• /
• 2000

구조물-지반 상호작용에서 알려진 것처럼 구조물 지진응답은 구조물하부 지반조거에 따라 영향을 받는데 UBC-97을 포함한 여러내진설계규준에서 지반사태 영향을 반영하고 있다 이 연구에서는 기초크기 기초밑 지반깊이, 입력지진 작용점 및 기초 근입깊이 등의 영향을 살펴보고 깊은 지반 위에 세워진 구조물의 평균응답스펙트럼을 UBC-97 탄성응답스펙트럼과 비교하기 위해 구조물-지반 상호작용을 고려한 지진해석을 가상 3차원 유한요소법과 부구조물법을 이용하여 1952년 Taft와 1940년 El Centro 지진기록을 주파수영역에서 수행하였다 연구결과에 의하면 기초크기는 구조물 응답에 별 영향이 없고 기초저면 지반깊이는 구조물체계의 고유주기와 최대가속도를 변경시켰다 또 입력지진의 합리적 작용점은 기초저면이라는 것이 확인되었으며 깊은 지반위에 놓인 기초의 근입은 저주기영역에서 구조물 응답을 상당히 줄어들게 하였다 한편 30m 깊은 지반위에 세워진 구조물의 평균가속도와 UBC-97 가속도를 비교한 결과 UBC-97 탄성응답스펙트럼에 의한 구조물 내진설계가 안전하지 못할 수도 있으므로 UBC-97 지진계수의 할증이 필요하다.

• Land and Housing Review
• /
• v.1 no.1
• /
• pp.51-57
• /
• 2010

The importance of seismic design is greatly emphasized recently in Korea, resulting in an increase in the number of dynamic analysis being performed. One of the most important input parameters for the dynamic seismic analysis is input ground motion. However, it is common practice to use recorded motions from U.S. or Japan without considering the seismic environment of Korea or synthetic motions generated in the frequency domain. The recorded motions are not suitable for the seismic environment of Korea since the variation in the duration and energy with the earthquake magnitude cannot be considered. The artificial motions generated in frequency domain used to generated design response spectrum compatible ground motion has the problem of generating motions that have different frequency characteristics compared to real recordings. In this study, an algorithm that generates target response spectrum compatible ground motions in time domain is used to generate a suite of input ground motions. The generated motions are shown to preserve the non-stationary characteristics of the real ground motion and at the same, almost perfectly match the design response spectrum.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.4
• /
• pp.53-63
• /
• 2011

Selection or generation of appropriate input ground motion is very important in performing a dynamic analysis. In Korea, it is a common practice to use recorded strong ground motions or artificial motions. The recorded motions show non-stationary characteristics, which is a distinct property of all earthquake motions, but have the problem of not matching the design response spectrum. The artificial motions match the design spectrum, but show stationary characteristics. This study generated ground motions that preserve the non-stationary characteristics of a real earthquake motion, but also matches the design spectrum. In the process, an impulse function-based algorithm that adjusts a given time series in time domain such that it matches the target response spectrum is used. Application of the algorithm showed that it can successfully adjust any recorded motions to match the target spectrum and also preserve the non-stationary characteristics. The modified motions are used to perform a series of nonlinear site response analyses. It is shown that the results using the adjusted motions result in more reliable estimates of ground vibration. It is thus recommended that the newly adjusted motions be used in practice instead of original recorded motions.

• Proceedings of the KSEEG Conference
• /
• 2000.04b
• /
• pp.182-183
• /
• 2000