• Journal of environmental and Sanitary engineering
• /
• v.16 no.2
• /
• pp.71-78
• /
• 2001

본 연구는 폐수 중 함유된 고농도의 LAS를 제거하기 위해 $FeSO_4$를 이용한 응집, 펜톤산화, 펜톤 공정 전.후에 응집공정을 조합시킨 Coagu-oxidation 및 Renton's Coagulation을 이용하여, 처리 시 최적 조건을 도출하고, 효율적인 화학적 처리방법을 검토하기 위해 수행되었다. 연구로부터 얻어진 결론은 다음과 같다. 응집공정은 pH 8, 응집제의 주입량 200mg/L인 조건에서, 펜톤산화는 pH 3, $H_2$$O_2$에 대한 ${Fe^2}^{+}$의 비가 1:1인 조건에서 최적효율을 보였다. Fenton's Coagulation 처리 시 LAS의 개환율은 높아졌고, 주입된 LAS농도의 73~96%가 제거되어 4가지 처리 방법 중 가 장 좋은 처리효율을 보였다. 따라서, LAS의 생물학적 처리 시 거품 및 부산물 생성 등에 의해 저해작용을 감안한다면, LAS가 다량으로 함유한 산업 폐수에서 화학적 처리방법의 도 입이 적절할 것으로 생각되며, 이들 중 Fenton's Coagulation을 유용하게 적용될 수 있을 것으로 판단된다.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 1997.10a
• /
• pp.5-12
• /
• 1997

외래 유전자를 이식하여 형질전환동물을 생산하는 방법은 현재 약 3가지 정도가 실제 이용되고 있다. 현재 가장 많이 사용되고 있는 방법으로는 DNA 미세주입법인데 생쥐와 비교하여 다른 동물에서의 형질전환효율은 상당히 낮은 것으로 나타나 형질전환가축의 생산을 위해서는 많은 비용과 시설 및 노동이 필요하여 실용성에 문제를 갖고 있다. 각 가축에 적합한 DNA 미세주입 조건을 확립시키고 형질전환동물의 생산효율을 높이는 연구가 필요하다. 가축에서 형질전환기술이 실제로 응용되고 있는 분야로는 대량생산이 어려운 의약품을 형질전환가축의 젖으로 합성 분비시키게 함으로써 생리적으로 활성이 있는 의약품의 대량생산이 가능할 것으로 예상된다. Growth Hormone이나 Growth Factor들을 이용한 성장과 관련된 형질전환가축의 기술은 예상했던 것보다 큰 성과는 없었는데 이식 유전자의 과잉발현으로 인한 부작용으로 실용화될 수 없었다. 그러므로 형질전환동물의 실용화를 위해서는 효율적인 유전자 이식방법의 개발과 이식 유전자의 발현으로 인한 부작용을 최소화하면서 좋은 표현형을 얻을 수 있도록 이식유전자의 발현을 인위적으로 조절할 수 있는 regulatory system의 개발과 가축의 경제형질에 관여하는 유전자의 식별이 필요하다.

• Journal of the Korean GEO-environmental Society
• /
• v.25 no.5
• /
• pp.15-19
• /
• 2024

This study aimed to develop high-efficiency grouting techniques under deep-depth conditions by experimentally verifying the applicability of various injection materials. Particle size analysis and injection model experiments were conducted with Ordinary Portland Cement (OPC) and Micro Cement (MC) to evaluate the injection performance of each material. Using Barton's Cubic Network theory, the rock fracture spacing was calculated for domestic deep-depth standards, specifically below 40 meters underground. The analysis of particle size passability under selected conditions showed that MC could pass through the rock fracture gaps, while OPC could not. According to the results of the injection model experiments using experimental devices and area calculation software, OPC failed in injection due to its larger particle size, whereas MC was capable of injection even under high-viscosity conditions. Based on these findings, the study quantitatively and visually derived the applicability of grouting materials under deep-depth conditions, and high-viscosity MC material is expected to be effective for waterproofing enhancement in deep-depth rock fracture surfaces.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.4
• /
• pp.11-20
• /
• 2020

This study introduced the compact grouting method that can be used for improving soft ground and restoring buildings with unequal subsidence. The pump used in the traditional compact grouting method is a system that injects one hole each, which reduces the construction efficiency, and the analog injection method manually manages the construction by field workers, making it difficult to manage consistent quality. Pump and quality control system were developed to solve problems in existing construction. Since field supervisor determines amount of injected materials by using analog equipment and controls manually, it is difficult to manage consistent quality of construction. Therefore, the quality control system was developed in order to solve that problem. The quality control system consists of automatic mixing system of injection materials, multiple simultaneous injection pumps, and injection management monitoring system. Performance of the quality control system was verified through on-site testing, and ground improvement performance was verified through quality testing after testing and testing of the compact grouting method. Therefore, it is expected that the integrated quality control system developed will improve the quality assurance and efficiency and stability of construction at sites where construction and quality verification are difficult.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2B
• /
• pp.207-212
• /
• 2009

Surfactants were used as representative anionic and non ionic surfactants to investigate the effect of mass transfer on the mineral-catalyzed Fenton-like oxidation of sorbed phenanthrene. Mass transfer of phenanthrene on the oxide surface or interlayer between aqueous and solid phases was generated by surfactant addition. Apparent solubility of phenanthrene was increased as surfactant concentration increasesd. In tests using Tween 80, oxidation of phenanthrene decreased as apparent solubility increased. High apparent solubility was not responsible for oxidation of sorbed phenanthrene in the sand due to the surfactant acted as a scavenger of degradation. In tests with SDS, $H_{2}O_{2}$ decomposition rate in Fenton-like oxidation was decreased by complexation between goethite and SDS. However, in tests using 32 mM of SDS, efficiency of phenanthrene treatment increased compared to the test without SDS addition. Therefore, suitable amount of SDS addition could provide optimum condition for phenanthrene oxidation on the oxide surface or interlayer between aqueous and solid phase, and decrease $H_{2}O_{2}$ decomposition, and as a result, phenanthrene removal efficiency can be improved.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2002.04a
• /
• pp.31-32
• /
• 2002

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1995.04a
• /
• pp.33-35
• /
• 1995

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.323-328
• /
• 2016

Pressurized membrane used for side-stream MBR process requires fouling control strategy both for normal and abnormal operation conditions for stable operation of the facilities. In this study, $85m^3/day$ of pilot-scale side-stream MBR process was constructed for the evaluation of fouling mitigation by air bubble injection into the membrane module. In addition, fouling phenomena at abnormal operation conditions of low influent and/or loading rate were also investigated. Injection of air bubble was found to be effective in delaying transmembrane pressure (TMP) increase mainly due to scouring effect on the membrane surface, resulting in expanded filtration cycle at a high flux of $40L/m^2{\cdot}h$ (LMH). At abnormal operation condition, injection of PACl (53 mg/L as Al) into the bioreactor showed 19% reduction of TMP increase. However, inhibition of nitrifying bacteria by continuous PACl injection was observed from batch experiments. In contrast, injection of powdered activated carbon (PAC, 0.6 g/L) was able to maintain the initial TMP of $0.2kg/cm^2$ for 5 days at the abnormal conditions. It may have been caused from the adsorption of extracellular polymeric substances (EPS), which was known to be excessively released during growth inhibition condition and act as the major foulants in MBR operations.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.654-658
• /
• 2012

In this study, $CO_2$ capture efficiency in relation to the inlet moisture content of the regenerator was investigated using potassium-based sorbents in the continuous process composed of two bubbling fluidized-bed reactors, where solid outlet configuration in the regenerator was converted from underflow to overflow. XRD (X-ray Diffraction), SEM (Scanning Electron Microscope) and TGA were performed to find out the effect of water pre-treatment according to inlet moisture content in the regenerator. The $K_2CO_3{\cdot}1.5H_2O$ structure of solid sorbents has been increased as inlet moisture content of the regenerator increased. As a result, the $CO_2$ capture efficiency increased as the $K_2CO_3{\cdot}1.5H_2O$ structure of solid sorbents increased since the reactivity of the sorbents has been improved by that structure generated by the water pre-treatment. And $CO_2$ capture efficiency increased about 3~8% after sorbent outlet configuration of the regenerator was changed underflow to overflow.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.251-251
• /
• 2011

해양 투기가 금지되면서 혐기소화를 통해 최종적으로 발생되는 폐기물 양을 줄이고 메탄 등의 바이오 가스를 얻어 이를 에너지로 얻기 위한 많은 공정들이 현장에 적용되고 있다. 하지만 혐기 소화 과정을 마친 후 유출되는 유출액은 고농도의 유기물질 및 암모니아성 질소, 인산염 등을 다량으로 함유하고 있어 적은 양이라도 하천이나 호수 등에 유입되면 수질 악화와 부영양화를 초래할 위험성이 크다. 이번 연구에서는 음식물류 폐기물로부터 바이오가스를 생산하기 위한 혐기소화 공정에서 발생하는 유출액의 방류수 수질기준 확보와 경제성을 만족시킬 수 있는 처리공정의 상용화 기술을 개발하기 위해 생물학적 처리， 물리 화학적 처리를 통합한 공정을 적용하였다. P건설사 혐기소화 유출액 pilot plant(1 ton/day) 운전 결과 50~70% 로 $NO_2$-N 이 약 1,000 mg/$\ell$정도로 축적되는 현상을 보였으며 상대적으로 $COD_{Cr}$의 농도는 400~600 mg/$\ell$로 C/N 비가 낮아 탈질이 어려울 것으로 판단하였다. 이에 실험실 규모에서의 실험을 진행하였다. $NO_2$-N와 $NO_3$-N을 기준으로 McCarty 양론비 기준 80% 에서 300%까지 메탄올을 주입해 제조 폐수와 실제폐수로 실험을 진행하였고 제조폐수로 실행된 실험에서 아질산 탈질의 효율을 확인하였다. 미생물이 메탄올에 순응 후 완전 탈질에 걸리는 시간은 약 2.5 일로 확인 되었으며 메탄올이 추가로 주입되지 않은 반응조의 $NO_2$-N의 탈질량은 메탄올이 이론값 100% 주입 된 반응조에 비해 30% 이하의 처리 효율을 나타냈다. 이론값을 기준으로 메탄올이 100% 주입된 반응조는 약 96.1%의 탈질 효율을 보였으며 메탄올 순응 후에 약 1.5 일의 HRT가 단축되었기 때문에 메탄올에 장시간 순응 시 탈질 효율이 더 좋아질 것으로 보인다. 아질산탈질에 대한 실험실 규모 연구결과를 토대로 pilot plant에서 재현성 검토를 목적으로 운전을 수행하였다. 무산소조의 HRT는 2.7 일 이었으며 호기조의 HRT는 4.1 일 이었다. 유입수의 평균 $COD_{Cr}$ 농도는 2,878 mg/L, T - N 농도는 2,723 mg/L로 나타났으며 $NO_2$-N 기준 C/N비 1.2-1.8의 메탄올을 주입하였을 때 96% 이상의 탈질율을 보였다.