• Korean Chemical Engineering Research
• /
• v.46 no.6
• /
• pp.1148-1152
• /
• 2008

Molten carbonate oxidation (MCO) is one of the promising alternative technologies for the treatment of the chlorinated organic compounds because it is capable of trapping chlorine during a destruction of them. In this study, destructions of chlorinated organic compounds ($C_6H_5Cl$, $C_2HCl_3$ and $CCl_4$) and an insulated oil containing PCBs were performed by using the two stage molten carbonate oxidation system. MCO reactor temperature largely affected the destruction of the chlorinated organic compounds. Destruction of the chlorinated organics very efficient in the primary MCO reactor however a significant amount of CO was emitted from the MCO system. This CO emission was gradually decreased by an increase in the primary reactor temperature and oxidizing air feed rate. The HCl emission from the MCO system was below 7 ppm regardless of tested conditions. The chlorine collection efficiencies were in the range of 99.95-99.99%. The destruction of PCBs in the insulated oil was efficient at a temperature above $900^{\circ}C$ and overall destruction efficiency of them was determined as over 99.9999%.

• Parasites, Hosts and Diseases
• /
• v.24 no.2
• /
• pp.115-120
• /
• 1986

This study was carried out to reveal the effect of temperature, salinity and aeration on maturation and hatching of Fibricola seoulensis eggs. The eggs were incubated and were observed daily for the appearance of eyespots and hatching. The results were summarized as follows. 1. From $4{\sim}5$ days after incubation in distilled water at $28^{\circ}C$ or at $11{\sim}26^{\circ}C$, the eyespots began to appear and the rates of eggs with eyespots were over 90% in $28^{\circ}C$ on the 7th or 8th day. However, eyespots did not appear in $5{\sim}15^{\circ}C$ or $4^{\circ}C$ by the 18th day. 2. The mature eggs began to hatch at the 8th day, and hatching rate 2 weeks after incubation was over 90% at $28^{\circ}C$, but it was below 5% at $11{\sim}26^{\circ}C$, and 0% at $5{\sim}15^{\circ}C$ and at $4^{\circ}C$. 3. Aeration did not influence the appearance of eyes pots nor hatching. 4. In salines under 0.6%, the rates of eyespots appearance were over 90% on the 7th day. The rate was 55.0% in 0.9% at 20 days, and 0% in 1.2%. 5. The hatching rates in salines below 0.3% concentration were over 90% by 14 days of incubation. However, the rate decreased to 44% in 0.6% saline and to 0% over 0.9% salinity. 6. The eggs incubated in the dark hatched in 12.5% on the 10th day, but hatching rate of mature eggs increased to 85.7% within 2 hours after exposure to light. Above results demonstrated that the best temperature for maturation and hatching of F. seoulensis eggs was $28^{\circ}C$, and the miracidia began to hatch at $8{\sim}9$ days after incubation. In the field, hatching and invasion into snails of the miracidia may occur from May to September in Korea. In salines under 0.3% concentration maturation and hatching were not influenced, but as salinity increased hatching was inhibited more than maturation was.

• Journal of Conservation Science
• /
• v.30 no.2
• /
• pp.149-156
• /
• 2014

Low oxygen treatment and heating treatment are used to prevent insects in the field of food science. These eco-friendly control methods can be applied to biological control technique in conservation treatment of organic cultural properties. To evaluate material stability, low-oxygen treatment and low oxygen treatment are applied to wood, pigment, paper and textile that are related to historical wooden buildings. As a result, wood moisture content declined after low oxygen treatment. But decline rate is a little, so it can be expected to turn back original state as time passes. And test result on pigment, paper, textile of chrominance and strength of test materials are stable. But after heating treatment, pigments are separated.

• Microbiology and Biotechnology Letters
• /
• v.17 no.1
• /
• pp.24-28
• /
• 1989

Effect of various fermentation parameter was investigated on the production of prednisolone by microbial $\Delta$'-dehydrogenation of hydrocortisone. The microbial conversion process was conducted by using pseudo-crystallo-fermentation techniques. The optimum temperature for the bioconversion process was found to be 35$^{\circ}C$. It was noted that the production rate of prednisolone was little affected within the initial pH range of 6.5-7.8, and also by the use of surfactant, Tween 80. Production rate of prednisolone was significantly reduced by the use of the antifoam agent, neolin. In a fermentor operation, however, large amount of antifoam agent should be used to remove foams generated by the high aeration rate, which resulted in n lower production rate of prednisolone than that from the shake flask experiment.

• Analytical Science and Technology
• /
• v.15 no.6
• /
• pp.496-501
• /
• 2002

The electrolyte cathode glow discharge (ELCAD) is a new optical system for direct determination of trace heavy metals in flowing water. ELCAD has been successfully developed for on-line monitoring of heavy metals in flowing water. The application of an atmospheric glow discharge between an electrolyte solution cathode and a platinum rod anode led to the development of stable discharge. The fundamental aspects of new plasma source have been investigated. The fundamental study of ELCAD system has been measured plasma temperature using Einstein-Boltzmann equation after searching Fe atomic emission lines. The spectrum of each elements such as Cu, Pb, Fe, Ni and Cr show only major elemental line and no ionic line possibly due to low temperature plasma source. The detection limits of each elements are also investigated. These informations show that this type of plasma may apply for monitoring of heavy metals in waste water which consists of complex matrix.

• Journal of Animal Environmental Science
• /
• v.18 no.2
• /
• pp.99-110
• /
• 2012

The purpose of the study is to collect basis data for to establish standard administrative processes of liquid fertilizer treatment. From this survey we could make out the key point of each step through a case of effective liquid manure treatment system in pig house. It is divided into six step; 1. piggery slurry management step, 2. Solid-liquid separation step, 3. liquid fertilizer treatment (aeration) step, 4. liquid fertilizer treatment (microorganism, recirculation and internal return) step, 5. liquid fertilizer treatment (completion) step, 6. land application step. From now on, standardization process of liquid manure treatment technologies need to be develop based on the six steps process.

• Journal of Life Science
• /
• v.12 no.3
• /
• pp.242-249
• /
• 2002

The optimal culture conditions in 500$m\ell$ flask suture, 5$\ell$ jar fermenter and 2,000 $\ell$ large stale culture were investigated to maximize the production of antibiotic on Rhizoctonia solani AC4, the causal agent of vegetables damping-off, by the strain Bacillus ehimensis YJ-37. Starch (1.5%) as a carbon source, peptone (0.6%) as a nitrogen source and MgC1$_2$(0.15%) as a metal ion in the medium containing N $a_2$HP $O_4$(0.3%) showed the highest production of the antibiotic(s) in a rotary shake (200 rpm). Optimal initial pH of the culture medium, culture temperature and culture time for the antibiotic(s) production were pH 8.0, 32$^{\circ}C$ and 54hrs, respertively. Under the optimal renditions in flask culture, cell growth and antifungal activity (clear zone size) were 1.42 $\times$ 10$^{8}$ cfu/$m\ell$ (21g-DCW/ $\ell$) and 13.9 mm, respectively. In 5 $\ell$ jar fermenter (medium 3 $\ell$), optimal air flow, agitation speed and culture time for the antibiotic(s) production were 2 vvm, 200 rpm and 48hrs, respectively. Under the optimal conditions in 5 $\ell$ jar fermenter, tell growth and antifungal activity were 2.06 $\times$ 10$^{8}$ cfu/$m\ell$ (30g-DCW/ $\ell$) and 13.4 mm, respectively. Under the culture conditions of air flow (30 vvm) and agitation speed (200 rpm) at 32$^{\circ}C$ for 10 days in 2,000 $\ell$ large scale culture (medium 1,800 $\ell$, pH 8.0), cell growth and antifungal activity were 0.81$\times$10$^{8}$ cfu/$m\ell$ (12g-DCW/ $\ell$) and 8.6 mm, respectively.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.5-5
• /
• 2000

액체 추진 로켓 엔진의 고주파 연소 불안정 관련 이론은 대체로 연소기 내부의 음향 공명 모드와 분무 연소 과정의 상호 작용을 구동 메커니즘으로 전제하며 Rayleigh Criterion의 재해석에 기초하여 불안정성 평가를 위한 매개변수를 도입하고 연소 불안정성을 예측한다. 여기에는 음향장 분석 이론, 음향 불안정 이론, 연소응답 및 기화반응 이론 등이 포함된다. 본 연구에서는 LOX/RPl 추진제 조합의 액체 추진 로켓 엔진 연소기를 대상으로 다차원 순수 음향장 해석과 연소-음향장 분석을 통해 대상 엔진의 고주파 연소 불안정 특성을 예측하였다. 수동 제어 기기인 음향공 설치에 따른 연소기의 음향장 및 연소-음향장의 특성 변화를 고찰하고 위 결과를 종합하여 음향공의 연소 불안정 억제 성능 및 대상 엔진의 연소 불안정성을 평가하였다. 연소기 형상 및 음향공 설치에 따른 다차원 순수 음향장 해석은 상용코드인 ANSYS를 사용하여 수행하였다. 내부 유체는 압축성, 비점성 유체로 유체의 평균 유동은 무시하며 위치에 관계없이 균일한 물성치를 부여하였다. 정상상태 연소과정을 가정하고 평형 화학을 이용한 분석 결과로부터 연소 기체의 관련 물성치를 결정하였다. 연소기 길이 방향, 반경 방향, 원주 방향 격자점들의 음향 특성을 주파수 영역에 대해 해석하고 3차원 음향 모드 형상을 토대로 음향장을 분석하였다. 연소-음향장 해석은 음향 불안정 이론 중 n- $\tau$ 2 매개변수 기법을 사용하였다. 연료 액적의 분무 연소 과정을 1차원적으로 가정하고 정상상태의 평형 화학 계산 결과를 이용하여 엔진의 연소면을 1차원적으로 설정하였다. 상류 연소응답과 중립 안정 곡선을 토대로 대상 엔진의 연소 불안정 특성을 분석하였다.구 분석 결과 기술적 문제점으로는 배기 가스온도가 낮은데 따른 출구 부분의 Bearing, Sealing이 문제가 될 수 있다고 판단되며 배기 가스 자체에 대기 공기중에 함유되어 있던 습기가 얼어붙는(Icing화) 문제가 발생하기 때문에 배기가스의 Icing을 방지하기 위하여 압축기 끝단에서 공기를 추출하여 배기부분에 송출할 필요성이 있는 것으로 판단되었다. 출구가스의 기체 유동속도가 매우 빠르므로 (100-l10m.sec) 이를 완화하기 위한 디퓨저의 설계가 요구된다고 판단된다. 또 연소기 후방에 물을 주입하는 경우 열교환기 및 기타 부분품에 발생할 수 있는 부식 및 열교환 효율 저하도 간과할 수 없는 문제로 파악되었다. 이러한 기술적 문제가 적절히 해결되는 경우 비활성 가스 제너레이터는 민수용으로는 대형 빌딩, 산림, 유조선 등의 화재에 매우 적절히 사용되어 질 수 있을 뿐 아니라 군사적으로도 군사작전 중 및 공군 기지의 화재 그리고 지하벙커에 설치되어 있는 고급 첨단 군사 장비 등의 화재 뿐 아니라 대간첩작전 등에 효과적으로 활용될 수 있을 것으로 판단된다.가 작으며, 본 연소관에 충전된 RDX/AP계 추진제의 경우 추진제의 습기투과에 의한 추진제 물성 변화는 미미한 것으로 나타났다.의 향상으로, 음성개선에 효과적이라고 사료되었으며, 이 방법이 편측 성대마비 환자의 효과적인 음성개선의 치료방법의 하나로 응용될 수 있으리라 생각된다..7%), 혈액투석, 식도부분절제술 및 위루술·위회장문합술을 시행한 경우가 각 1례(2.9%)씩이었다. 13) 심각한 합병증은 9례(26.5%)에서 보였는데 그중 식도협착증이 6례(17.6%), 급성신부전증 1례(2.9%), 종격동기흉과 폐염이 병발한 경우와 폐염이 각 1례(2.9%)였다. 14)

• Clean Technology
• /
• v.6 no.2
• /
• pp.113-119
• /
• 2000

Due to the toxicity of dioxin in the incinerator flue gas, it becomes a severe social problem. Activated carbon adsorption process is one of the methods for removing dioxin in the flue gas and was investigated its performance for removing hazardous organic compounds. Since dioxin is very hazardous material, 1,2-dichlorobenzene(o-DCB), one of the precursor material of dioxin, was used as adsorbate. The effects of air flow rate, pressure drop in the bag filter, operation temperature of bag filter, and kinds of adsorbents on the removal of o-DCB were measured and analysed. Experimental results showed that the operating temperature was recommended within the range of $140{\sim}170^{\circ}C$ considering the operating condition of incinerator. Also it was necessary to maintain the pressure drop of bag filter $120mmH_2O$ for enhancing the adsorption at the surface layer of activated carbon formed on the bag filter. The use of mixture of same amount of activated carbon and diatomite showed more than 90% removal of o-DCB and also reduced the consumption of activated carbon.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.4
• /
• pp.394-401
• /
• 2005

A nonthermal plasma-assisted fuel reformer was developed and the effects of operating variables on the performance of this reformer were studied. The $H_2$-rich reformed gas from the reformer was injected into a diesel engine under an idle condition and the effects of the amount of injected gas on the NO and soot reduction were investigated. It was found that with increasing electric power consumption, the degree of facility of ignition of the reforming reaction in the reformer could be enhanced. The performance of the reformer including $H_2$ concentration, $H_2$ recovery, and energy conversion was affected only by the O/C mole ratio. This was because the equilibrium reaction temperature was governed by the O/C mole ratio. With increasing O/C mole ratio, the $H_2$ recovery and energy conversion passed through the maximum values of 33.4% and 66%, respectively, at an O/C mole ratio between 1.2 and 1.5. The reason why the $H_2$ recovery and energy conversion increased with increasing O/C mole ratio when the O/C mole ratio was lower than $1.2{\sim}1.5$ appeared to be that the complete oxidation reaction occurred more enough with increasing O/C mole ratio in this low O/C mole ratio range and accordingly the reaction temperature increased. Whereas the reason why the $H_2$ recovery and energy conversion decreased with increasing O/C mole ratio when the O/C mole ratio was higher than $1.2{\sim}1.5$ appeared to be that the complete oxidation reaction was further advanced and the $H_2$ recovery and energy conversion decreased. As the weight ratio of reformed diesel to total diesel which entered the diesel engine was increased to $18.2{\sim}23.5%$, NO and soot reduction efficiencies increased and reached as values high as 68.5% and 23.5%, respectively.