• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.33-37
• /
• 1992

구조물과 기계부품에 부하를 주는 하중은 여러가지 종류가 있고, 이에 따르는 파괴의 형식도 여러가지가 있다. 그중에서도 연강압연용 로울러, 베어링 레일등은 집중 압축하중을 받는데 이들 부재의 파괴사고가 빈번히 일어나고 잇다. 압축에 의한 파괴 중 frectting, 피팅등과 같은 마모 현상은 두 재료의 표면이 서로 미끌어질때 일어나며, 이것이 공구나 기계부품의 성능과 수명을 저하시키는 주원인이 되며, 이러한 궁구나 기계 부품을 수리 또는 교환을 하기위한 인적, 경제적 손실은 막대하다. 본 연구에서는 금형등 공구의 마모편이 발생되는 마지막 과정인 크렉의 성장을 고찰하기 위하여 Sub-surface크랙 모델을 설정하여 2차원 유한요소 법으로 경계층 근방에 크랙이 존재하는 반무한 평면에 집중하중이 작용할때의 응력확대계수를 해설하였는데, 일반화된 해석법으로 혼합모드에서의 응력확대계수를 결정하였다.

• Computational Structural Engineering
• /
• v.11 no.4
• /
• pp.275-286
• /
• 1998

본 논문은 고정, 단순, 또는 자유 연단 조건의 네 가지의 다른 조합을 갖는 마름모꼴형 평판의 자유진동 데이터를 처음으로 제시한 연구이다. 본 논문의 주된 관점은 마름모꼴 형 평판 둔각모서리의 휨응력의 특이도를 엄밀히 고려하여 해석하는 것이다. Ritz 방법을 이용하여 수직진동변위를 두 가지 적합 함수식으로 가정하였다. 힌지와 고정, 자유와 고정, 또한 힌지와 자유인 모서리 응력 특이도의 중대한 영향력이 이해될 수 있도록 충분히 큰 1650 둔각모서리를 갖는 마름모꼴형 평판에 대하여 엄밀한 무차원 진동수와 수직변동변위의 전형적인 등고선을 제시하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.4
• /
• pp.91-99
• /
• 2020

Post-installed anchors were widely used due to its workable benefits. Regarding the resistance performance of anchors, the critical edge distance is presented to minimize the impact of concrete splitting. In the case of actual anchors, however, it is difficult to obtain the ideal edge distance. The purpose of this study is to identify resistance performance and behavior characteristics that contain complex elements such as concrete crack occurring under tensile load. Tensile tests were conducted based on the standard method. Failure shape and the resistance characteristics that do not have the critical edge distance were derived by tensile load. Parametric analysis according to the boundary condition was performed to simulate the actual tensile behavior, through a nonlinear finite element model based on the specimen. Consequently therefore, verifying analysis results the resistance mechanism can be applied through boundary conditions.

• Journal of Biomedical Engineering Research
• /
• v.22 no.1
• /
• pp.69-80
• /
• 2001

본 연구에서는 환자의 골다공증 유무에 따른 내고정 장치 시술 직후 및 융합 후의 안정성을 평가하기 위해 다양한 하중 모드에서 C5-C6 운동분절의 생체역학적 거동을 분석하였다. 이러한 목적으로 먼저, C5-C6 경추부의 유한요소 모델을 구현하여 검증하였다. 모델의 결과는 기존 실험치와 유사하여 신뢰성이 부여되었다. 검증된 모델은 Smith-Robinson 방식으로 골이식물을 삽입한 후 전방 내고정 장치를 적용한 시술 상황을 재현하기 위해 수정되었다. 수정된 모델은 두 종류로 구현되었다. (1) 첫 번째 모델에서는, 시술 직후의 상황을 재현하기 위해 골이식물과 종판의 경계면에 접촉요소를 사용하였다. (2)두 번째 모델에서는 완전히 융합된 상황을 나타내기 위해 골이식물을 종판에 고정하였다. 골다공증의 효과를 예측하기 위하여 두 모델의 해면골에 대한 탄성계수를 변화시켰다(정상: 100MPa, 골다공증: 40MPa). 각 모델의 C5 주체의 상위면에 73.6N의 압축 하중을 가한 후에 108Nm의 굴곡/신전, 굽힘, 비틀림 하중을 가하였으며, C6 추체의 하단면은 모든 방향에 대하여 구속하였다. 전체적인 결과에 있어서 상대적 회전운동, 미끄럼운동, 골이식물 내에서의 von Mises 응력의 경우 정상 모델에 비해 골다공증 모델에서 증가함을 보였으며, 특히 시술 직후의 모델에서 비틀림 하중이 가해진 경우, 상대적 회전운동 및 미끄럼 운동이 가장 높게 예측되었다. 이는 골다공증환자에게 전방 내고정 장치를 시술한 경우 골이식물의 파단 및 유합의 실패가 비틀림 하중에서 발생할 수 있음을 나타낸다. 해면골의 von Mises 응력은 시술 직후에 골다공증 모델의 모든 하중 모드에서, 유합 후에는 굽힘 하중 외의 모든 하중에서 ultimate strength를 초과하는 것으로 나타나 골다공증 환자에게 screw의 해리가 발생할 가능성이 높은 것으로 예측되었다. 따라서 골다공증 환자에게 과도한 운동이 발생하지 않도록 하기 위해서 시술 후 세심한 주의와 halo 같은 견고한 정형술이 필요할 것으로 사료된다.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.5
• /
• pp.215-220
• /
• 2008

The kerfs between arrayed piezoelectric elements in a medical ultrasonic transducer or a piezoelectric composite transducer are generally filled by polymeric materials. The boundary condition of the elements for lateral mode vibration is changed according to the kerf-filling materials, so that the resonance frequency for longitudinal mode of the transducer is also varied. In this study, to investigate the resonance frequency variation for an arrayed transducer experimentally, the piezoelectric vibration elements of $14mm{\times}0.22mm{\times}0.44mm$ were fabricated and those were linearly arrayed. And, the resonance frequencies were measured for three cases of kerf-filling condition, non-filling and two different kinds of epoxy filling. Conclusively, it is confirmed that the resonant frequency variation shows the similar tendency with the theoretical one for the longitudinal mode.

• The Journal of the Korea Contents Association
• /
• v.6 no.9
• /
• pp.19-27
• /
• 2006

Mean shift procedure is applied for the data points in the joint spatial-range domain and achieves a high quality. However, a color image is segmented differently according to the inputted spatial parameter or range parameter and the demerit is that the image is broken into many small regions in case of the small parameter. In this paper, to improve this demerit, we propose the method that groups similar regions using region merging method for over-segmented images. The proposed method converts a over-segmented image in RGB color space into in HSI color space and merges similar regions by hue information. Here, to preserve edge information, the region merge constraints are used to decide whether regions are merged or not. After then, we merge the regions in RGB color space for non-processed regions in HSI color space. Experimental results show the superiority in region's segmentation results.

• Composites Research
• /
• v.35 no.1
• /
• pp.8-12
• /
• 2022

Analysis of defect signals inside glass fiber reinforced polymer (GFRP) was conducted through deconvolution of terahertz (THz) wave. The GFRP specimen with internal defects was manufactured and the THz signal was measured through the reflection mode of the Terahertz Time-Domain Spectroscopy (THz-TDS) system. For deconvolution of the measured THz signal, the peak position of the THz signal was amplified through Normalized Cross Correlation (NCC) of the incident and detected THz signals. The position and intensity of the amplified peak were extracted as impulse, and the extracted signal of the impulse position was removed from the THz original signal. By repeating the process, the critical impulses, which represent boundary of the specimen, were derived. The deconvolution process was verified by confirming that the original THz signal without noise can be restored through the convolution of the critical impulses and the incident signal. From the derived critical impulses, the thickness of the internal defect in the GFRP was calculated through the detection time of impulses within 15 ㎛ accuracy.

• Journal of Energy Engineering
• /
• v.28 no.4
• /
• pp.103-110
• /
• 2019

The domestic innovative power reactor named iPOWER will employ the passive molten corium cooling system(PMCCS) to cool down and stabilize the core melt in the severe accident. The final design concept of the PMCCS is yet to be determined, but the in-vessel retention through external reactor vessel cooling has been also considered as a viable strategy to cope with the severe accident. In this study, the two-phase natural circulation flow established between the reactor vessel and the insulation was simulated using a thermal-hydraulic system code, MARS-KS. The flow path of cooling water was modeled with one-dimensional nodes, and the boundary condition of the heat load from the molten core was defined to estimate the naturally-driven flow rate. The evolution of major thermal-hydraulic parameters were also evaluated, including the temperature and the level of cooling water, the void fraction around the lower head of the reactor vessel, and the heat transfer mode on its external surface.

• Journal of Popular Narrative
• /
• v.25 no.1
• /
• pp.429-462
• /
• 2019

This paper argues how the concept of melodrama can be articulated with the Affect Theory and Posthumanism in relation to animal or environment representation which have emerged as the new topics of the recent era. The argument will be made through the discussion of Agustin Zarzosa's book, Refiguring Melodrama in Film and Television: Captitve Affects, Elastic Sufferings, Vicarious Objects. Using a genealogical approach, the book revisits the notion of mode, affect, suffering (hysteria), and excess which have been dealt with in the existing studies of melodrama. In chapter one, he broadens the concept of melodrama as a mode into the means of redistribution of suffering across the whole society in the mechanism of the duo of evil and virtue. It is the opposition of Brooks's argument in which melodrama functions as the means of proving the distinction between evil and virtue. Chapter two focuses on the fact that melodrama is an elastic system of specification rather than a system of signification, with the perspective of Deleuzian metaphysics. Through the analysis of Home from the Hill (Vincente Minnelli, 1959), this chapter pays attention to an 'affect' generated by the encounters between the bodies and the Mise-en-Scène as a flow not of a meaning but of an affect. Chapter three argues that melodrama should reveal an unloved (woman's) suffering, opposing the discussion on the role of melodrama as the recovery of moral order. Safe (Todd Haynes, 1995), dealing with female suffering caused by the industrial and social environment, elaborates on the arguments on melodrama in relation to female hysteria with ecocritical standpoints. The rest of the two chapters discusses the role of melodrama for the limitation and extension of the notion of the human through 'animal' and 'posthuman' melodrama. It argues that the concept of melodrama as 'excess' and 'sacrifice' blurs the boundary between human and inhuman. In summary, although the author Zarzosa partly agrees with Peter Brook's notion of mode, affect and sufferings,he elaborates the concept of melodrama, by articulating philosophical arguments such as Deleuzianism, feminism, and posthumanism (Akira Lippit and Carry Wolf) with the melodrama. Thefore, Zarzosa challenges the concepts of melodrama led by Brooks, which had been canonical in the field.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.5
• /
• pp.629-635
• /
• 2010

An SGBEM (symmetric Galerkin boundary element method)-FEM alternating method has been proposed by Nikishkov, Park and Atluri. This method can be used to obtain mixed-mode stress intensity factors for planar and nonplanar three-dimensional cracks having an arbitrary shape. For field applications, however, it is necessary to verify the accuracy and consistency of this method. Therefore, in this study, we investigate the effects of several factors on the accuracy of the stress intensity factors obtained using the abovementioned alternating method. The obtained stress intensity factors are compared with the known values provided in handbooks, especially in the case of internal and external circumferential semi-elliptical surface cracks. The results show that the SGBEM-FEM alternating method yields accurate stress intensity factors for three-dimensional cracks, including internal and external circumferential surface cracks and that the method can be used as a robust crack analysis tool for solving field problems.