• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.1
• /
• pp.61-66
• /
• 2010

Purpose: This study was performed to determine vertical fixation disparity by Fixation Disparity Card. The purpose of this study was to investigate distribution of the curve types obtained with Wesson card. Methods: Fixation disparity curves were measured on 52 subjects with the Wesson fixation disparity card. A fixation disparity curve was an x, y coordinate plot of the angular amount of fixation disparity as a function of the power of prisms through which the patient views. The fixation disparity curve variables that were used to aid in the diagnosis and management of binocular vision disorders included the x-intercept, y-intercept, curve slope and curve type. Results: Vertical fixation disparity curves by Wesson Fixation Disparity Card were very various. Conclusions: Vertiical fixation disparity curves could be used to aid in the diagnosis and prescription.

• Journal of Korean Ophthalmic Optics Society
• /
• v.12 no.1
• /
• pp.53-59
• /
• 2007

A commonly used device to determine fixation disparity curves is the Wesson Fixation Disparity Card. A fixation disparity curve is an x, y coordinate plot of the angular amount of fixation disparity as a function of the power of prisms through which the patient views. The fixation disparity curve variables that are used to aid in the diagnosis and management of binocular vision disorders include the x-intercept, y-intercept, curve slope and curve type. Fixation disparity curves were measured on 102 subjects with the Wesson fixation disparity card. The purpose of this study is to investigate distribution of the curve types obtained with Wesson card. Fixation Disparity by Wesson Fixation Disparity Card were that in case of type I 63.0%, in case of type II 0.0%, in case of type III 25.0% and in case of type IV 12.0%.

• Geophysics and Geophysical Exploration
• /
• v.5 no.1
• /
• pp.18-22
• /
• 2002

As a single arrival traveltime, maximum energy arrival traveltime has been known as the most proper operator for Kirchhoff migration. In case of the model having the simple structure, both the first arrival traveltime and the maximum energy arrival traveltime can be used as the correct operators for Kirchhoff migration. However for some model having the complex and high velocity contrast structure, the migration using the first arrival traveltime can't give the correct depth section. That is, traveltime to be required in Kirchhoff migration is the maximum energy traveltime, but, needs considerably more calculation time than that of first arrival. In this paper, we propose the method for calculating the traveltime approximated to the maximum energy arrival using one-way wave equation. After defining the WAS(Wrap Around Suppression) factor to be used for calculating the first arrival traveltime using one-way wave equation as the function of lateral grid interval and depth and considering the delay time of source wavelet. we calculate the traveltime approximated to the maximum energy arrival. to verify the validity of this traveltime, we applied this to the migraion for simple structure and complex structure and compared the depth section with that obtained by using the first arrival traveltime.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2002.11a
• /
• pp.297-301
• /
• 2002

본 논문에서는 신호처리를 이용한 평행축 입체 카메라의 주시각 제어 방법을 제시한다. 평행축 입체 카메라는 양안식 입체 카메라 중 가장 간단하게 만들 수 있는 장점이 있는 반면에, 좌, 우 영상센서 사이의 거리가 일정하게 고정되어 있어, 물체의 거리 변화에 따른 입체 영상 시차 조절 기능인 주시각 제어 기능이 없다는 단점이 있다. 영상 센서 (CCD) 와 렌즈를 분리하고 영상 센서가 평행하게 수평으로 움직이며 주시각을 제어하도록 하는 수평 이동축 입체 카메라는 평행축 입체 카메라의 단점을 보완할 수 있지만, 실제 구현에 많은 어려움이 있다. 본 논문에서는 주시각 제어를 위한 CCD의 이동은 실제 영상에서 피사체의 이동으로 나타난다는 사실을 이용하여, 평행축 입체 카메라로 얻은 영상에서, CCD의 이동으로 인해 사라지는 부분만큼 제거하고 영상의 수평 수직 방향에서 원래 영상의 크기로 복원하기 위해 보간하는 과정을 통해 주시각 제어를 구현한다. 제안된 방법을 통해 얻어진 실험 결과는 CCD의 이동량에 따라서 화질의 열화 정도가 다르게 나타남을 보여 주지만, 실제 시스템에서 CCD의 이동량은 크지 알기 때문에 화질 열화를 거의 느끼지 않으면서 주시각이 제어된 입체 영상을 얻을 수 있음을 보여준다.

• Geophysics and Geophysical Exploration
• /
• v.9 no.3
• /
• pp.241-249
• /
• 2006

Due to the long tectonic history and the very complex geologic formations in Korea, the anisotropic characteristics of subsurface material may often change very greatly and locally. The algorithms commonly used, however, may not give sufficiently precise computational results of traveltime data particularly for the complex and strong anisotropic model, since they are based on the two-dimensional (2D) earth and/or weak anisotropy assumptions. This study is intended to develope a three-dimensional (3D) modeling algorithm to precisely calculate the first arrival time in the complex anisotropic media. Considering the complex geology of Korea, we assume 3D TTI (tilted transversely isotropy) medium having the arbitrary symmetry axis. The algorithm includes the 2D non-linear interpolation scheme to calculate the traveltimes inside the grid and the 3D traveltime mapping to fill the 3D model with first arrival times. The weak anisotropy assumption, moreover, can be overcome through devising a numerical approach of the steepest descent method in the calculation of minimum traveltime, instead of using approximate solution. The performance of the algorithm developed in this study is demonstrated by the comparison of the analytic and numerical solutions for the homogeneous anisotropic earth as well as through the numerical experiment for the two layer model whose anisotropic properties are greatly different each other. We expect that the developed modeling algorithm can be used in the development of processing and inversion schemes of seismic data acquired in strongly anisotropic environment, such as migration, velocity analysis, cross-well tomography and so on.

• Science of Emotion and Sensibility
• /
• v.17 no.2
• /
• pp.111-122
• /
• 2014

This study has analyzed the scanning path algorithm shown at the process of exploring spatial information through an observation experiment with the object of lobby in subway station. In the estimation of observation time by section, the frequency of scanning type was found to increase as the observation time got longer, which makes it possible that the longer the observation lasts the more the observation interruptions occur. In addition, the observation slipped out of the range of imaging when any fatigue was caused from the observation or the more active exploration took place. Furthermore, when the trend line was employed for the examination of the changes to the scanning type by time section, "concentration" "diagonal or vertical" showed a sharp and a gentle increases along with the increase of time section respectively, while "circulation. combination, horizontal" showed a reduction. The observation data of the subjects observing a space include various visual information. The analysis of the scanning type found at "attention concentration" enabled to draw this significant conclusion. The features of increase and decrease of scanning types can be a fundamental data for understanding the scanning tendency by time.

• Geophysics and Geophysical Exploration
• /
• v.12 no.3
• /
• pp.233-238
• /
• 2009

An inversion method regulated by the error in the measurement of the first arrival time was developed, and we conducted a feasibility study by applying the method to a real cross-well seismic data. The inversion is a two-step regulation process; 1) derive the measurement error bound based on the resolution of the velocity image want to derive, and exclude the records whose picking error is larger than the error bound, 2) set the travel time residual to zero if the residual is less than the measurement error. This process prevents the trivial residuals are accumulated and contribute to the velocity-model update. Comparison of two velocity images, one by using all records and another by using the regulate inversion method, shows that the later velocity image exhibits less numerical artefacts, and it also indicates that, according to the Fermat's principle, the latter image is a more feasible velocity model.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.3
• /
• pp.79-87
• /
• 2008

Purpose: This study measured Y-intercept that means a fixation disparity, X-intercept that means a associated phoria and slope of a fixation disparity curve (FDC), which are variables of dissociated phoria and the FDC. We searched for the result value and examined the direction, distribution pattern and a variable that give an most affect on dissociated phoria and the FDC at distance and near. Also this study examined that there were statistically significant differences between distance and near, comparing the result value. Methods: We measured the dissociated phoria and the fixation disparity for 51 subjects at distance and near in June, 2007. All subjects ranged from 20 to 25 years of age (average 21.72${\pm}$1.88 years old) and had no eye disease. At distance the dissociated phoria measured with the distance MIM card (muscle imbalance measure card, Bernell co., USA), and the fixation disparity measured with the modified Mallett Far Unit (Bernell co., USA). At near the dissociated phoria measured with the near MIM card (muscle imbalance measure card, Bernell co., USA), and the fixation disparity measured with the Wesson fixation disparity card (American Optical co., USA). Results: The percentage distribution of types of fixation disparity curves was that at distance prevalence of Type I (74.6%) was the highest, followed by Type IV (17.6%) and Type II (3.9%), Type III (3.9%) and that at near prevalence of Type I (53.0%) was the highest, followed by Type III (29.4%), Type IV (13.7%) and Type II (3.9%). 2. There were significantly correlation in dissociated phoria, fixation disparity (Y-intercept) and associated phoria (X-intercept). 3. The fixation disparity at distance was most affected by associated phoria (X-intercept) (p=0.000). The distance dissociated phoria was most affected by fixation disparity (Y-intercept) (p=0.342), but the influence was weak. 4. The fixation disparity at near was most affected by associated phoria (X-intercept) (p=0.000). The near also dissociated phoria was most affected by associated phoria (X-intercept) (p=0.009). The result that compared the each variables with the same variables at distance and near had statistically significant on paired t-test for among dissociated phoria (t=7.529, p=0.000), X-intercept (t=5.860, p=0.000), the Y-intercept (t=4.640, p=0.000) but slope of the FDC did not differ significant (t=1.336 p=0.188). Conclusions: Relationship of fixation disparity and Heterophoria had close correlation at distance and near.

• Science of Emotion and Sensibility
• /
• v.18 no.4
• /
• pp.3-14
• /
• 2015

This study has extracted observation data by spatial factor for the analysis of subjects' selective attention with the objects of public space at the entrance of subway stations. The methods extracting observation data can be summarized as the following. First, the frequency analysis by lattice was prevalent for those methods, but there is a limitation to the analysis of the observation data. On the contrary, the method extracting observation data by factor applied in this study can make it clear if any sight is concentrated on any particular factors in a space. Second, the results from the extracted data corresponding to the observation area can be objectified while the method setting up the observation area by applying the radius of fovea. Third, time-sequential trace of observation results of relevant factors was possible through hourly analysis of spatial factors. The consideration of the results of "corresponding spatial scope" which is the object of this study will reveal that the more the observation time, the less the degree of attention it receives. Fourth, the frequency of observation superiority was applied for the analysis of the sections with selective attention by time scope; this revealed that men and women had intensive observation in time scope I (52.4 %) and in time scope IV (24.0 %), respectively.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10d
• /
• pp.475-477
• /
• 2002

입체영상을 관측할 때 눈의 피로를 최소화할 수 있는 자연스러운 입체영상을 얻기 위해서는 양안식 카메라의 주시각을 제어하여야 한다. 움직이는 물체에 대한 양안식 카메라의 주시각 제어를 위해 획득 영상의 edge 정보를 이용한 주시각 제어에 대하여 연구하였다. 양안식 입체 카메라로 획득한 좌.우 영상에서 edge정보를 추출하고, 이를 이용하여 양안시차를 구하고 주시각 제어에 이용함으로써 영상의 변화와 관계없이 양안시차를 항상 일정하게 유지할 수 있도륵 하였다. 본 논문에서는 간단한 연산만을 사용함으로써 응답속도가 빠르고, 하드웨어 구성도 매우 간단해 지도록 하였다. 또한 영상의 특성에 맞는 알고리즘을 사용할 수 있도록 2 mode 동작 시스템으로 구성하여 오차를 최대한 줄이며 움직이는 물체에 대한 연속적인 주시각 제어를 할 수 있도록 구현하였다.