• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.4
• /
• pp.190-194
• /
• 2000

Dispersion coefficient influenced by the wave parameters was derived analytically using the vertical velocity distribution based on linear wave theory. It is the depth- and wave period-averaged value and shows larger values in deep water condition than in shallow water condition. It also shows the general pattern of the dispersion coefficient in the oscillatory flows, i.e. it converges the specific value as the wave period is much larger than the vertical mixing time but it approaches zcro as the wave period is much smaller than the vertical mixing time. The dispersion coefficient derived in the condition of the simple assumption have to be modified in order to consider the shallow water condition or the real condition.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.195-200
• /
• 2020

Leakage and Bragg condition of optical waveguides with blazed grating profile are evaluated in detail by using novel and rigorous modal transmission-line theory (MTLT) based on eigenvalue problem. The blazed waveguides classified as symmetric, sawtooth and asymmetric gratings occur leaky-wave stop-band at Bragg conditions and anomalies based on Rayleigh condition near Bragg conditions. Furthermore, DFB properties of blazed waveguides at Bragg conditions are analyzed by applying longitudinal equivalent transmission-line with characteristic impedance of periodic grating. The numerical results show that the reflected power of DFB waveguides is maximized at Bragg conditions in which leaky-wave stop-bands occur.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1987.04a
• /
• pp.206-211
• /
• 1987

본 논문에서는 입력 신호인 정현파의 위상을 PGZC(positive going zero corssing)에 대해 한주기당 2회씩 추적하도록 하는 디지털 위상도기 회로(DPLL)을 제시한다. 제시된 루루프는 한 주기당 2번의 표본화를 갖도록 함으로써 한 주기당 하나의 표본을 취하는 기존의 DPLLqhek 정상 상태에서의 위상오차 변동범위가 전체적으로 1/2로 감소되었고, 연속 표본들간의 오차와 양자화 준위의 선택에 따라서 루우프의 천이 응답이 좋아짐을 알 수 있었다. 그 해석적 결과를 실제적으로 요구되는 조건류에 대하여 컴퓨터 시뮬레이션을 행함으로써 검증하였다.

• Journal of Aquaculture
• /
• v.6 no.4
• /
• pp.323-338
• /
• 1993

The primary objective of this study was to examine the toxic effects of PCP on activated sludge and to analyze its metabolic responses while treating wastewater containing pentachlorophenol (PCP) in a sequencing batch reactor (SBR) system operating under different control strategies. This study was conducted in two phases 1 and 2 (8-hr and 12-hr cycles). Each phase was operated with two control strategies I and II. Strategy I (reactor 1) involved rapid addition (5 minutes to complete) of substrate to the reactor with continuous mixing but no aeration for 2 hours. Strategy II (reactor 2) involved adding the feed continuously during the first 2 hours of the cycle when the system was mixed but not aerated. During both phases each reactor was operated at a sludge age of 15 days. The synthetic wastewater was used as a feed. The COD of the feed solution was about 380 mg/L. After the reference response for both reactors was established, the steady state response of each system was established for PCP feed concentrations of 0.1 mg/L, 1.0 mg/L, and 5.0 mg/L in SBR systems operating on both 8-hr and 12-hr cycles. Soluble COD removal was not inhibited at any feed PCP concentrations used. At 5.0 mg/L feed PCP concentration and in SBR systems operating on phase 2, the concentrations or ML VSS were decreased; selective pressure on the mixed biomass might be increased, narrowing the range of possible ecological responses; the settleability of activated sludge was poor; the SOURs were increased, showing that the systems were shocked. Nitrification was made to some extent at all concentrations of feed PCP in SBR systems operating on phase 2 whereas in SBR systems operating on phase 1 little nitrification was observed. Then, nitrification will be delayed as much as soluble COD removal is retarded due to PCP inhibition effects. Enhanced biological phosphorus removal occurring in the system operating with control strategy I during phase 1 of this work and in the presence of low concentrations of PCP was unreliable and might cease at anytime, whereas enhanced biological phosphorus removal occurring in the system operating with either control strategy I or II during phase 2 of this work and in the presence of feed PCP concentrations up to 1.0 mg/L was reliable. When, however, such processes were exposed to 5.0 mg/L PCP dose, enhanced phosphorus removal ceased and never returned.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.2
• /
• pp.92-99
• /
• 1991

A moored body in the sea is subjected to second-order wave forces as well as to linear oscillatory ones. The second-order farces contain slowly-varying components, of which the characteristic frequency can be as low as the natural frequency of horizontal motions of the moored body. As a consequence, the slowly-varying force can excite unexpectedly large horizontal excursion of the body, which may cause a serious damage on the mooring system. In design analysis of Turret-type mooring system which is one of the interesting mooring systems for a floating body. the slowly-varying drift forces and the transient motion of the system during weathervaning are very important. In this paper the slowly-varying drift forces were calculated by using the Quadratic Transfer Function with considering the second order free-wave contributions. Additionaly the transient surge motion of the moored body was simulated with including the roll of the time-memory effect. In this simulation the spring constant of the spread Turret mooring system is updated at every time step for considering the nonlinear effect.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.1
• /
• pp.61-67
• /
• 2000

Digital controllers found in many industrial real-time systems consist of a number of interacting periodic tasks. To sustain the required control quality, these tasks possess the maximum activation periods as performance constraints. An essential step in developing a real-time system is thus to assign each of these tasks a constant period such that the maximum activation requirements are met while the system utilization is minimized [1]. Given a task graph design allowing producer/consumer relationships among tasks [2], resource demands of tasks, and range constraints on periods, the period assignment problem falls into a class of nonlinear optimization problems. This paper proposes a ploynomial time approximation algorithm which produces a solution whose utilization does not exceed twice the optimal utilization. Our experimental analysis shows that the proposed algorithm finds solutions which are very close to the optimal ones in most cases of practical interest.

• Journal of Aerospace System Engineering
• /
• v.13 no.3
• /
• pp.87-94
• /
• 2019

In this paper, we test procedures to demonstrate operating environmental conditions that can be exposed to UAV during its life-cycle are proposed. They are set up to be used in a large-sized climate chamber, one of the facilities of the Agency for Defense Development corresponding with the system requirements. The test steps and profile details were more specifically suggested for rainfall, humidity, and temperature (low-temperature storage and operation, high-temperature operation and solar radiation), and MIL-STD-810G w/Change-1-based.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.9
• /
• pp.1655-1660
• /
• 2001

여성의 생리주기가 행동성 체온조절에 미치는 영향을 관찰하고자, 본 연구에서는 6명의 건강한 여자대 학생을 대상으로 하여 22.5$^{\circ}C$와 55%RH의 환경에서 피험자 스스로가 의복을 선택하는 쾌적의복선택 실험과 피험자 스스로가 온도를 선택하는 쾌적 온도선택 실험을 각각 수행하였다. 평균피부온은 생리주기에 관계없이 쾌적온도선택 실험보다 쾌적의복선택 실험에서 높게 유지되었고, 생리주기에 따른 쾌적착의량과 쾌적온도의 차이는 보이지 않았다. 그러나, 6명의 피험자 중 4명의 피험자가 선택하여 착용한 착의량은 황체기보다 여포기에 더 많았고 (p<0.05), 5명의 피험자가 선택한 쾌적온도 역시 황체기보다 여포기에 평균 1.4$^{\circ}C$ 더 높은 것으로 나타났다 (p<0.01). 이러한 결과는, 피부의 온도를 조절함으로써 여포기보다 황체기에 심부체온을 높게 유지하기 위한 행동성 체온조절반응을 나타낸 것으로 보이나, 보다 명확한 결론을 내리기 위해서는 다양한 환경조건에서 다수의 피험자를 대상으로 하는 후속연구가 지속적으로 수행되어 야 할 것이다.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.5
• /
• pp.101-109
• /
• 2014

In order to save costs and enhance quality in construction without damaging the environment, the VE/LCC analysis method is increasingly used. This study was carried out to conduct a value analysis for the ecological restoration of a slope considering life cycle cost and performance. The construction conditions were classified into three types(A, B, C) according to the condition of each base. Three construction methods for slope ecological restoration were selected by each condition. Eventually, a value analysis was conducted for total nine conditions by analyzing the life cycle cost and performance. The gradient of slope and base of Condition 1 were below 1:1.2 and general soil, while condition 2 and 3 were below 1:1.0(reaping rock) and below 1:0.7(soft rock, blasted rock), respectively. A value analysis was conducted based on the value estimated via life cycle cost and performance analysis. The result showed that the B construction method had the highest value in Condition 1 as it showed 108.4, while A and C showed 90.3 and 45.8, respectively. When it comes to Condition 2, Construction Method A indicated the highest value as it showed 89.1(B: 47.5, C: 47.0). In Condition 3, Construction Method A(89.1) was the highest, while B and C showed 55.4 and 40.2, respectively. Based on the result of this study, in order to make a reasonable decision that can enhance quality and reduce costs in slope ecological restoration, the slope ecological restoration method must be reviewed in consideration of life cycle cost and performance.

• Journal of Korea Water Resources Association
• /
• v.47 no.1
• /
• pp.37-47
• /
• 2014

This study examines the processes and the behaviour characteristics of forcing bars in channels with periodic variable width in the alternate and braided regimes by using a two dimensional numerical model. The wavelength and the migration speed decrease as the amplitude of variable width increases. The forcing effects of the width variation on the alternate bars is stronger than those on the braided bars. The bar migration speed increases as the dimensionless amplitude in the braided regime is 0.25. However, the migration speed is abruptly decreased as the amplitude in it was larger than 0.25. The bar migration speed increases in the alternates bar regime as the dimensionless wavelength increases. However, the migration speed decreases around 1 of the wavelength. As the bar wavelength and the variable width wavelength coincide, the bars don't migrate downstream by the strong forcing effects on the bars due to the suppression by the width variation.