• KOREAN POULTRY JOURNAL
• /
• v.52 no.9
• /
• pp.142-144
• /
• 2020

혹서기를 지나 환절기에 들어가면서 환절기 부화율 향상을 위한 종계 사양 관리에서 가장 큰 난점은 일교차에 따른 환기 관리와 여름을 지나면서 지쳐있던 수탉계군의 컨디션을 얼마나 잘 향상·유지하느냐에 있다. 이런한 난점을 해결하기 위해서는 단열과 적정 환기 등으로 계사 내의 온도 차를 줄이고 계사 내 환경을 쾌적하게 유지하며, 양질의 적절한 사료 관리와 체계화되고 주기적인 수탉 관리로 환절기 종계의 부화율 향상에 도움이 되었으면 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.4
• /
• pp.483-490
• /
• 2011

Using a coplanar waveguide employing periodic ground structure (PGS) on silicon substrate, a highly miniaturized and broadband impedance transformer was developed for application to low impedance matching in broadband. Concretely, the multi-section transformer was designed using Chebyshev polynomials design technique for ultra broadband operation. Its size was 0.026 $m^2$ on silicon substrate, which was 8.7 % of the one fabricated by conventional coplanar waveguide on silicon substrate. The transformer showed a good RF performance over a ultra broadband from 8 - 49.5 GHz.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.27-32
• /
• 2005

This paper investigates the effects of outdoor pressure fluctuations on natural ventilation through openings of a building envelope. The ventilation airflow rate depends on the magnitude and the period of the pressure fluctuations, the size of the opening compared to the space volume, and the resistance characteristics of the opening. Non-dimensional parameters have been derived, which determine indoor pressure responses due to outdoor pressure fluctuations. The flow regions are categorized into synchronized region, opening resistance region, and transition region depending on the non-dimensional parameters.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.10a
• /
• pp.77-78
• /
• 2001

선박건조 기술의 지속적인 발전에도 불구하고 선박운항 중에 반복적으로 발생 하는 문제점중의 하나가 열교환기의 파손에 따른 문제점이다. 이러한 열교환기의 파손문제는 일반적인 기계류의 파손과는 달리 경우에 따라서는 주기관인 main engine을 정지시켜야 되는 등 선박운항에 미치는 영향이 매우 크다. 열교환기에 있어서 선박운항 중에 주로 발생되는 부식사례로는 원통부위의 각종 gauge의 thread부분의 간극부식과 침식-부식에 의한 세관의 파손 등이 있다. 이러한 세관의 파손은 각종 oil의 유출 및 sea water 혼입 등의 문제를 일으킨다. (중략)

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.334-335
• /
• 2004

It is important that the contaminated air is not revealed to the outside of the facility. The inside of the facility should be classified into several zones according to the radioactivity and each zone should maintain tile differential negative pressure between the zones also. It is not easy to equilibrate the pressure during the operation. On the normal operation, the clogging of the HEPA filter and the opening of the doors/shutters influence very much. We could maintain the differential negative pressure between the zones by the constant watching and periodical replacement of the filters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.446-451
• /
• 2020

Flow induced vibration in a heat exchanger may cause damage to piping. The purpose of this study was to compare the characteristics of vortex shedding behavior through the circular tube banks at several tube locations, No.1, No. 10, and No. 19, with respect to time when the flow velocity of the inlet is constantly and periodically fluctuating.(60) The time characteristics of lift and the PSD characteristics were also investigated. In the case of periodic inlet flow velocity, strong vortex occurred at some time and after that time, a weak vortex was generated through the tube banks simultaneously. In the case of constant inlet flow velocity, the lift fluctuating frequency was 37.25Hz and that at the No. 19 tube was 18.63Hz and near 50Hz. In the case of periodic inlet flow velocity, the lift fluctuating frequency was 37.25Hz and 18.63Hz. The lift fluctuating frequency at No. 19 tube was observed broadly from 20Hz and 50Hz.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.613-618
• /
• 2019

The flow-induced vibration in a heat exchanger may cause the damage to piping. Therefore, it is necessary to establish the flow induced vibration characteristics for the structural stability of a heat exchanger. The purpose of this study was to compare the generation, development, and separation characteristics of a vortex around a circular tube with respect to time when the flow velocity of the inlet was fluctuating constantly and periodically. The time characteristics of lift and drag and the PSD characteristics were also investigated. In the case of a constant inlet flow velocity, the well-known Kalman vorticity distribution was shown. The vortex generation, growth, and separation were also observed alternately at the upper and lower sides of the tube. In the case of periodic inlet flow velocity, the vortex occurred simultaneously in the upper and lower sides of the tube. In the case of constant inlet flow velocity, the magnitude of the lift PSD was 500 times larger than that of drag. The frequency was 31.15 Hz and that of drag was doubled at 62.3 Hz. In case of a periodic inlet flow velocity, the PSD of the drag was approximately 500 times larger than that of lift. The frequency was 15.57 Hz, which was the same as the inlet-flow velocity frequency. In addition, the frequency of lift was 31.15 Hz, which was the same Karman vortex frequency.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.4
• /
• pp.41-49
• /
• 2015

The amount of energy consumed in air ventilation systems of public facilities accounts for 40% of their total energy consumption. To reduce their energy consumption, applying variable speed operation controlled by an inverter with a high-efficiency motor is suggested. Since these methods require higher initial investment costs compared to the existing systems, economic evaluation should be conducted from a long-term perspective. While LCCA(Life Cycle Cost Analysis) model is useful to estimate net savings of alternatives that differs with respect to initial costs and operating costs, the environmental burdens are not considered. On the contrary LCA(Life Cycle Assesment) model is suitable to assess environmental impacts associated with the stages of a product's life but it does not consider costs. In this study, the high-efficient motors are introduced into the air ventilation system of a subway station and a comprehensive analysis on the economic and environmental impacts of the proposed method is conducted by using LCCA and LCA model.

• KOREAN POULTRY JOURNAL
• /
• v.36 no.7 s.417
• /
• pp.70-74
• /
• 2004

최근 육종개량의 발전과 성과로 인하여 대형화되었지만 고밀도 사육에 의해서 하절기 열사병과 심한 더위로 인한 생산성 저하가 큰 문제로 혹서기에 대두되고 있어 그 대응책을 반드시 세워야 할 것이다. 하절기 온도관리 대책으로서는 계사내의 공기유통을 좋게 하는 것이 가장 기본이므로 충분한 환기에 의해 닭의 체감온도를 낮추어 주게 되는 것이다. 그러나 우리나라와 같이 여름철의 기후 특성이 고온다습한 경우는 습도가 높아지게 되면 체감온도는 낮아지지 않는다. 그러므로 계사내의 습도를 저하시키기 위해서 환기휀 등을 이용해 깔짚과 계분을 건조시키는 것도 한가지방법이다. 일반적으로 열사병 대책으로 실시하고 있는 방법으로서는 입기구에 물 분무, 지붕에 물 분무, 계사내의 미세한 분무냉각 등 물을 이용하는 방법이나, 환풍기의 설치, 닥트송풍을 이용한 방법, 거칠고 얇은 그물에 의한 차광 등의 방법으로 온도를 낮게 할 수가 있다. 특히 산란계의 경우 여러 연구보고 자료에 의하면 산란계를 고온 환경에서 사육할 경우 난각질이 저하된다고 하는 보고가 많이 있다. 1일 중에 환경온도를 주기적으로 변화시킨 경우는 일정하게만 유지해 주는 환경온도에 비해서 난각질과 난각강도는 낮아지게 된다. 또한 산란계에 있어서 간헐점등에 대해서는 에너지 수준을 줄이는 기술, 또는 사료절감을 유도하는 방법은 계속 연구되고 있다. 따라서 다음은 하절기 산란$\cdot$육계사의 적온유지를 위한 온도관리 사례에 대하여 이야기하고자 한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.3 s.94
• /
• pp.311-318
• /
• 2005

Periodically perforated slot structure in the upper wall of the parallel plate waveguide is analyzed with main interest focusing on the diffraction Properties. The Periodic slot array is of infinite extent in one direction and of finite extent in the other direction. Various numerical results for reflection from the slotted section and transmission beyond the slotted section, and the radiation through the slotted section into the upper half space are presented with the height of feeding parallel plate waveguide, single slot size, and the periodicity between slots as parameters. This study is thought to be helpful to the design of the ventilation hole in the TFT-LCD and PDP.