• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.231-234
• /
• 2011

본 논문은 교량의 안전진단을 위한 각 부재의 명명체계에 따라 직선형 교량모델의 각 부재에 대한 솔리드 객체의 고유번호를 일괄적으로 부여하기 위한 방법론을 제시한다. 개발된 방법론은 크게 3 단계의 프로세스로 이루어진다. 먼저, 부재의 종류별로 구분된 레이어로부터 각 부재에 대한 솔리드 객체의 도심을 추출하고, 이를 시점과 종점으로 이루어진 교축방향을 축으로 한 국부좌표계에 대해 변환한다. 이후 교축방향으로 정렬되는 객체를 식별하여 그룹핑하고 이를 교축 및 교축의 직각방향으로 순서로 정렬한다. 마지막으로 각 그룹 내 세그먼트들을 교축방향으로 정렬한다. 개발된 방법론에 따른 시범 응용모듈을 개발하였으며, 트러스 구조와 서로 다른 모델 좌표계를 가진 시범 교량모델을 대상으로 추출된 그룹의 개수와 각 객체의 명칭을 원래의 모델과 비교하여 그 적용성을 검토하였다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.350-351
• /
• 2008

현재 우리나라의 측량체계는 크게 측지분야와 지적분야로 이원화되어 있으며 측지분야에서는 2001년도에 측량법을 개정하여 ITRF2000좌표계와 GRS80 타원체를 측량기준으로 사용하는 세계측지계를 도입하였다. 하지만 지적 분야에서는 국민의 재산권과 직접적으로 관련이 있는 필지의 경계와 면적의 변화 연구는 미미한 상태이다. 따라서 본 연구는 2010년 세계측지계 도입 후 지적분야에서 발생할 수 있는 필지별 면적 변동에 따른 사회적 혼란 여부를 판단하기 위하여 서울특별시 종로구 숭인등 숭인4구역주택재개발지구를 연구 대상지로 선정하여 세계측지계 전환에 지적 필지별 면적 변화를 분석하였다. 분석결과 연구대상지는 세계측지계와 지역측지계가 종선(X)축으로 305.87m. 종선(Y)축으로 70.87m 편차로 두 좌표계 간 북동방향으로 313.97m의 차이가 있고, 현행성과와 비교한 결과 종선(X) 방향으로는 평균 +4.0cm, 횡선(Y) 방향으로는 평균 -3.0cm의 차이가 나타났으며, 필지별 면적의 변동량은 $1.0m^2{\sim}3.0m^2$ 차이가 있지만 허용오차 범위 내에 있으므로 세계측지계 전환에는 문제점이 없는 것으로 판단된다. 하지만 본 연구의 결과는 그 대상범위가 한정되어 있고 기 검증된 지적기준점 성과를 사용한 결과이므로, 향후 보다 효율적인 세계측지계 전환과 도입을 위해서는 현 지적기준점체계의 정확한 세계좌표계 변환 성과를 기준으로 한 대단위의 필지별 면적 변동량 및 허용범위 분석과 같은 추가적인 연구가 조속히 이루어져야 할 것으로 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.2
• /
• pp.121-131
• /
• 1986

The stiffness matrix of circularly curved frame elements including the warping effects is formulated by the solutions of vlasov's differential equations, and the procedure for the elastic static analysis of curved girder systems by the displacement method is presented. The validity of this method has been demonstrated by comparing the analysis results with other solutions. And if the tangential lines of the two frame element axes connected at any nodal point coincide, the transformation to the global coordinate system can be omitted when we analyze the structures consisting of circularly curved elements. The theory introduced in this thesis can be applied with sufficient accuracy to the structures built up with horizontally circular curved frame elements which have closed or open cross sections and are symmetric to the axis perpendicular to the plane of the curvature, such as prestressed concrete box girder bridges.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.4
• /
• pp.294-300
• /
• 2010

Purpose: The template-guided implant surgery offers several advantages over the traditional approach. The purpose of this study was to evaluate the accuracy of coordinate synchronization procedure with 5-axis milling machine for surgical template fabrication by means of reverse engineering through universal CAD software. Materials and methods: The study was performed on ten edentulous models with imbedded gutta percha stoppings which were hidden under silicon gingival form. The platform for synchordination was formed on the bottom side of models and these casts were imaged in Cone beam CT. Vectors of stoppings were extracted and transferred to those of planned implant on virtual planning software. Depth of milling process was set to the level of one half of stoppings and the coordinate of the data was synchronized to the model image. Synchronization of milling coordinate was done by the conversion process for the platform for the synchordination located on the bottom of the model. The models were fixed on the synchordination plate of 5-axis milling machine and drilling was done as the planned vector and depth based on the synchronized data with twist drill of the same diameter as GP stopping. For the 3D rendering and image merging, the impression tray was set on the conbeam CT and pre- and post- CT acquiring was done with the model fixed on the impression body. The accuracy analysis was done with Solidworks (Dassault systems, Concord, USA) by measuring vector of stopping’s top and bottom centers of experimental model through merging and reverse engineering the planned and post-drilling CT image. Correlations among the parameters were tested by means of Pearson correlation coefficient and calculated with SPSS (release 14.0, SPSS Inc. Chicago, USA) ($\alpha$ = 0.05). Results: Due to the declination, GP remnant on upper half of stoppings was observed for every drilled bores. The deviation between planned image and drilled bore that was reverse engineered was 0.31 (0.15 - 0.42) mm at the entrance, 0.36 (0.24 - 0.51) mm at the apex, and angular deviation was 1.62 (0.54 - 2.27)$^{\circ}$. There was positive correlation between the deviation at the entrance and that at the apex (Pearson Correlation Coefficient = 0.904, P = .013). Conclusion: The coordinate synchronization 5-axis milling procedure has adequate accuracy for the production of the guided surgical template.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.4
• /
• pp.55-60
• /
• 2012

When operating a surveillance system in the maritime environment, its stabilization performance is degraded due to undesirable disturbance motions. For accurate target pointing of a 2-axes surveillance system on shipboard, the kinematic stabilization is first applied, which compensates a deviated motion via coordinate transformations of attitude information. Resultantly, the stabilization error is no longer reduced due to less accuracy of a MEMS sensor and kinematic constraint, leading to introduction of the image stabilization as a complementary function. And for real-time execution of the present dual stabilization scheme, a HILS (Hardware In the Loop Simulation) test bed including 6-dof motion simulator has been constructed, and through the obtained HILS data, it has been confirmed that the stabilization is successfully.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.1
• /
• pp.21-30
• /
• 1985

The tension leg platform (TLP) is a kind of compliant structures, and is also a type of moored stable platform with a buoyancy exceeding the weight because of having tensioned vertical anchor cables. In this paper, among the various kinds of tension leg structures, Deep Oil Technology (DOT) TLP was analyzed because it has large-displacement portions of the immersed surface such as vertical corner pontoons and small-diameter elongated members such as cross-bracing. It also has results of hydraulic model tests, comparable with theorectical analysis. Because of the vertical axes of symmetry in the three vertical buoyant legs and because there are no larger horizontal buoyant members between these three vertical members, it was decided to develop a numerical algorithm which would predict the dynamic response of the DOT TLP using the previously developed numerical algorithm Floating Vessel Response Simulation (FVRS) for vertically axisymmetric bodies of revolution. In addition, a linearized hydroelastic Morison equation subroutine would be developed to account for the hydrodynamic pressure forces on the small member cross bracing. Interaction between the large buoyant members or small member cross bracings is considered to be negligible and is not included in the analysis. The dynamic response of the DOT TLP in the surge mode is compared with the results of the TLP algorithm for various combinations of diffraction and Morison forces and moments. The results which include the Morison equation are better than the results for diffraction only. This is because the vertically axisymmetric buoyant members are only marginally large enough to consider diffractions effects. The prototype TLP results are expected to be more inertially dominated.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.4
• /
• pp.231-244
• /
• 2015

The accuracy of reference point of VLBI antenna is mandatory to perform collocation of different space geodetic techniques. In this study, we evaluated the optimal methods for the 3D circle fitting to enhance the accuracy of the reference point of VLBI antenna. Two kinds of methodologies for the orthonormal coordinate system with translation of planar observation point and the unitary coordinate transforamation were suggested and their fitting accuracies were evaluated where the orthogonal distance was calculated by residual between observation point and fitting model and the recursive calculation was performed to improve the accuracy of 3D circle fitting. Finally, we found that the methodology for the unitary coordinate transformation is highly appropriate to determine the optimal equation for azimuth-axis and elevation-axis of VLBI antenna. Therefore, the reference point of VLBI antenna with high accuracy can be determined by the intersection of the above two axises (azimuth-axis and elevation-axis). This result is expected to be utilized for a variety of researches for connection between VLBI observation results and the national control point.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.7
• /
• pp.1894-1905
• /
• 1996

Delauuany triangulation which is the dual of Dirichlet tessellation is not affine invariant. In other words, the triangulation is dependent upon the choice of the coordinate axes used to represent the vertices. In the same reason, Delahanty tetrahedrization does not have an affine iveariant transformation property. In this paper, we present a new type of tetrahedrization of spacial points sets which is unaffected by translations, scalings, shearings and rotations. An affine invariant tetrahedrization is discussed as a means of affine invariant 2 -D triangulation extended to three-dimensional tetrahedrization. A new associate norm between two points in 3-D space is defined. The visualization of the structure of tetrahedrization can discriminate between Delaunay tetrahedrization and affine invariant tetrahedrization.

• Smart Media Journal
• /
• v.1 no.4
• /
• pp.18-26
• /
• 2012

The increase of the number of smartphone applications has enforced the importance of new user interface emergence and has raised the interest of research in the convergence of multiple sensors. In this paper, we propose a method for the convergence of acceleration, magnetic and gyro sensors to recognize the gesture from motion of user smartphone. The proposed method first obtain the 3D orientation of smartphone and recognize the gesture of hand motion by using HMM(Hidden Markov Model). The proposed method for the representation for 3D orientation of smartphone in spherical coordinate was used for quantization of smartphone orientation to be more sensitive in rotation axis. The experimental result shows that the success rate of our method is 93%.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1459-1460
• /
• 2015

안경을 제작하기 위하여 안경테 혹은 렌즈의 사이즈를 측정하는 기계를 취형기라 하며, 측정된 데이터를 사용하여 렌즈를 절삭하는 기계를 옥습기라 한다. 본 논문에서는 취형기를 통해 획득한 데이터를 3D 시각화 하는 방법에 대하여 서술한다. 취형기의 탐침자에서 획득된 데이터는 1024개, 즉 데이터당 약 $0.352^{\circ}$에 해당하는 각도로 획득한 데이터로 구성되며, 각 데이터는 취형기 중심에서 경계까지의 거리와 렌즈 혹은 안경테의 높이 데이터를 포함한다. 해당 데이터는 취형기에서 얻은 원통좌표계 형식의 원시 데이터 형태에서 OpenGL에서 사용하기 좋은 3차원 데이터 형식으로 나타낼 수 있도록 재가공하여 X, Y, Z 축 기반의 3차원 직교좌표계 형식으로 변환한다. 그 후, OpenGL을 사용하여 3D로 시각화하였다. 해당 데이터를 회전할 수 있도록 하기 위하여 쿼터니언 기반의 ArcBall을 사용하여 회전 가능하게 하였으며, 3D 시각화 된 결과를 확대/축소할 수 있게 하였다. 디스플레이에서 실제와 같은 크기로 출력하기 위하여 DPI를 활용한 축척 계산법을 사용하였고, 출력결과의 더 나은 시각화를 위하여 평균보간법을 사용하였다.