• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1500-1504
• /
• 2010

본 연구에서는 EFDC(Environmental Fluid Dynamics Code) 모형을 이용하여 이원 담수화호의 염분분포를 모의하였다. SMS(Surface Water Modeling System) 모형을 이용하여 담수호에 대한 격자망을 구성하였다. 격자체계는 직교좌표계를 사용하였으며, 전체 2,620개의 유효계산격자를 구성하여 모형에 적용하였다. 수위 및 유량에 대한 경계조건은 기상자료와 배수갑문 운용자료를 통해 구축하였으며, 초기조건은 수위 실측자료를 이용하였다. 담수호의 염분모의를 위한 모형의 경계 조건은 호내에 위치한 5개소의 실측자료를 이용하였으며, 유역에서의 유입수염분농도는 0.2 ppt, 방조제 외측으로부터의 유입수 염분농도는 해수조건(30 ppt)을 적용하였다. 염분분포 모의를 위해 2006년부터 2008년까지 3년동안의 염분농도 실측자료를 이용하여 보정과 검정을 실시한 결과, 대상 지역에 대해 EFDC 모형의 적용성이 있는 것으로 나타났다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.10a
• /
• pp.9-10
• /
• 2009

해상에서 선박사고에 의한 기름 유출 시, 기름의 위치, 변화과정, 이동 특성을 신속하게 파악하고 예측하는 것은 방제전략에 있어 필수적 요소이다. 따라서 사고 이후의 유출의 현황 정보의 수집은, '유출유 대응 매뉴얼'(IMO, 1988; ITOPF, 2008) 에서 가장 우선시 되고 있다. 일반적으로 유출유 탐지는 선박, 항공기 및 인공위성을 이용한 방법이 사용되고 있으며, 최근 인공위성기술의 발전에 따라, 국제유조선선주오염방지연맹(ITOPF)에서는 인공위성 원격탐사 기술 적용을 통한 유류 모니터링 적용을 권장하고 있다 (ITOPF, 2008). 허베이스피리트호 원유유출 사고는 2007년 12월 7일 아침 7시 6분경 서해안 만리포 북서쪽 10km 해상에서 크레인을 적재한 1만1800t급 바지선이 정박 중인 홍콩 선적 유조선 허베이 스피리트호(14만6000t급)와 부딪치면서 발생했다. 국내에서는 원격탐사를 이용한 기술지원체계가 갖춰져 있지 않기 때문에, 이번 사고의 경우에도 실질적인 지원이 이루어지지 못했다. 본 연구에서는 원격탐사에 의한 유류오염 사고 시 유출유 탐지 및 추출 그리고 정보의 가시화 좌표화를 통해서 실질적인 방제지원시스템을 개발하기 위한 연구 개발의 중간보고를 하기 위한 것이다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.209-212
• /
• 2000

본 논문에서는 칼라 CCD 카메라로부터 입력된 얼굴 영상에서 칼라 정보와 눈, 코, 입 등의 얼굴 영역 특징자 및 턱선의 선형적 특징을 이용한 얼굴 인식 알고리즘을 제안하였다. 제안한 알고리즘에서는 인간의 시각 체계와 비교적 유사한 HSI좌표계 상에서 피부색에 대한 색상 정보와 명암값 정보를 함께 이용함으로써 얼굴영역 추출의 효율을 높였고, 적응적인 추출이 가능하도록 하였다. 또한 추출된 얼굴 영역에서 얼굴 인식율 개선을 위해 눈, 코, 입 등의 구조적 위치 정보와 턱선의 선형적인 특징값을 이용하여 얼굴 인식율을 개선하였다. 제안한 알고리즘에서는 기존의 명암 정보를 이용하는 방법과는 달리 색상 정보와 명암 정보를 함께 이용함으로써 정확한 얼굴 영역의 검출이 가능하였으며 인식 방법에 있어서 구조적 특징자 외에 턱선의 선형적인 관계값을 이용함으로써 인식 효율을 개선하였다.

• Journal of Wetlands Research
• /
• v.16 no.3
• /
• pp.327-336
• /
• 2014

Submerged thin walls are extreme case of submerged rectangular blocks, and could be used for many purposes in rivers or coastal zones, e.g. to tsunami. To understand flow characteristics including flow and pressure fields around a specific submerged thin wall a numerical model was applied which includes computation of hydrodynamic pressure on ${\sigma}$-coordinate. ${\sigma}$-coordinate has strong merits for simulation of subcritical flow over mild-sloped beds. On the other hand ${\sigma}$-coordinate is quite poor to treat sharp structures on the bed. There have been a few trials to incorporate dynamic pressure in ${\sigma}$-coordinate by some researchers. One of the previous approaches includes process of sloving the Poisson equation. However, the above method includes many high-order terms, and requires long cpu for simulation. Another method SOLA was developed by Hirt et al. for computation of dynamic pressure, but it was valid for straight grid system only. Previous SOLA was modified for ${\sigma}$-coordinate for the present purpose and was adopted in a model system, CST3D. Computed flow field shows reasonable behaviour including vorticity is much stronger than the upstream and downstream of the structure. The model was verified to laboratory experiments at a 2DV flume. Time-average flow vectors were measured by using one-dimensional electro-magnetic velocimeter. Computed flow field agrees well with the measured flow field within 10 % error from the speed point of view at 5 profiles. It is thought that the modified SOLA scheme is useful for ${\sigma}$-coordinate system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.1
• /
• pp.41-50
• /
• 1998

The object positional data in the form of digital imagery is processed and stored and is updated easily. The GPS, positioning system using satellites, is acquired its utilities in many parts because it is very easy to get the three dimensional coordinates using GPS around the world. For the effective acquisition of positional data to-ward objects in space, the automation of digital photogrammetry must be done and data acquisition and processing should be performed in real-time. In this study, the program is developed for automatic process of digital photogrammetry and the VAN that has CCD cameras and GPS receivers onboard is built for mobile positioning system. Also, the three dimensional positioning toward 20 objects which are vertical to the ground is done using left and right imagery of CCD cameras and GPS. For a base research in real-time photogrammetry, the three dimensional positioning is performed using continuous imagery and GPS and the three dimensional positioning accuracy is analyzed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1833-1839
• /
• 2014

In this paper, a systematic demapping algorithm for three-dimensional (3-D) lattice signal constellations is presented. The algorithm consists of decision of an octant, computation of a distance from the origin, and determination of the coordinates of a symbol. Since the algorithm can be extended systematically, it is applicable to the larger lattice constellations. To verify the algorithm, 3-D signal transmission systems with field programmable gate array (FPGA) and $Matlab^{(R)}$ are implemented. And they are exploited to carry out computer simulation. As a result, both hardware and software based systems produce almost the same symbol error rates (SERs) in an additive white Gaussian noise (AWGN) environment. In addition, the hardware based system implemented with an FPGA generates waveforms of 3-D signals and recovers the original binary sequences perfectly. Those results confirm that the algorithm and the implemented 3-D transmission system operate correctly.

• Spatial Information Research
• /
• v.15 no.4
• /
• pp.363-370
• /
• 2007

This study has been carried for the development of the basic algorithm of helicopter navigation system based on TRN (Terrain Referenced Navigation) with information input from the GPS. The helicopter determines flight path due to Origination-Destination analysis on the Cartesian coordinate system of 3-D DTM. This system shows 3-D mesh map and the O-D flight path profile for the pilot's acknowledgement of the terrain, at first. The system builds TCF (terrain clearance floor) far the buffer zone upon the surface of ground relief to avid the ground collision. If the helicopter enters to the buffer zone during navigation, the real-time warning message which commands to raise the body pops up using Matlab menu. While departing or landing, control of the height of the body is possible. At present, the information (x, y, z coordinates) from the GPS is assumed to be input into the system every 92.8 m of horizontal distance while navigating along flight path. DTM of 3" interval has been adopted from that which was provided by ChumSungDae Co., Ltd..

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.2
• /
• pp.121-134
• /
• 2013

The transverse cylindrical projection has been used in Korea since 1910s when the nationwide geodetic network was firstly established. However, the projection has a number of different types of functions according to a way of its mathematical derivation as well as a section of its coefficients and terms, for instance Gauss- Schreiber(GS) and Gauss-Kruger(GK) types. Although the transverse cylindrical projection itself is assigned to a system, projected coordinates would be diverse with respect to the function used in the actual calculation. In order to investigate impact of functions used in the computation, five different equations (i.e., 2 GS and 3 GK) were implemented in this study by using MATLAB. A series of numerical simulation tests has been carried out to compare and characterize them in terms of projection accuracy, difference of projected coordinates and distortion. Furthermore, a comparison between GS and GK function was made under the Korean gridding system, consisting of four zones. Results from the numerical computations were qualitatively analyzed and summarized in this paper.

• Korean Journal of Remote Sensing
• /
• v.27 no.2
• /
• pp.141-150
• /
• 2011

Precise image-to-image registration is required to process multi-sensor data together. The purpose of this paper is to develop an algorithm that register between high-resolution optical and SAR images using linear features. As a pre-processing step, initial alignment was fulfilled using manually selected tie points to remove any dislocations caused by scale difference, rotation, and translation of images. Canny edge operator was applied to both images to extract linear features. These features were used to design a cost function that finds matching points based on their similarity. Outliers having larger geometric differences than general matching points were eliminated. The remaining points were used to construct a new transformation model, which was combined the piecewise linear function with the global affine transformation, and applied to increase the accuracy of geometric correction.

• Korean Journal of Optics and Photonics
• /
• v.20 no.2
• /
• pp.110-117
• /
• 2009

This work introduces the uncertainty evaluation formulation on color measurement of light sources and display devices, such as CIE 1931 (x, y) chromaticity, CIE 1960 (u, v) chromaticity, correlated color temperature, and distribution temperature. All the mentioned quantities are reduced from spectral data in the visible range, for which uncertainties are strongly correlated between different wavelengths. Using matrix algebra we have formulated the uncertainty propagation from the SI- traceable spectral irradiance standard to the individual color related measurement quantities taking the correlation between wavelengths into account. As a result, we have demonstrated uncertainty evaluation examples of 3 types of light sources: CIE illuminant A, LED white light, and LCD white light. This method can be applied to any other quantities based on spectral measurement such as solar irradiance, material color measurement, etc.