• Journal of Ocean Engineering and Technology
• /
• v.16 no.1
• /
• pp.52-57
• /
• 2002

본 논문은 고온 고압의 유체를 수송하는 해저 파이프의 좌굴 현상에 대해서 논하였다. 고온 고압의 유체를 해저 파이프로 수송 할 때, 수송되는 고온 고압의 유체와 수위 해저의 온도와 압력들의 차에 의해서 유체 수송 파이프는 축 방향으로 압축력을 받게 되고 이 압축력을 견디지 못하면 수송 파이프는 수직 방향의 좌굴 현상이 발생하게 된다. 논문에서는 "semi-empirical design method"를 사용하여 수송 유체의 온도와 압력의 여러 가지 변화에 따라 파이프의 축 방향 압축력을 계산하고 수직 좌굴 현상에 따른 안전계수를 구하여 파이프의 초기 설계 결정에 도움을 주고자 했다.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.313-315
• /
• 2010

본 연구에서는 I-단면 플레이트거더의 횡비틀림 좌굴현상 및 설계 공칭강도 평가를 위해 3차원 컴퓨터 시뮬레이션을 수행하였다. 유한요소기법을 적용한 비선형 수치해석 모델에 초기 불완전성을 합리적으로 고려한 시뮬레이션 방안은 실제 실험적 평가로 나타난 거동과 잘 일치하는 것을 확인하였다.

• Computational Structural Engineering
• /
• v.3 no.4
• /
• pp.14-23
• /
• 1990

구조물의 초기결함 민감도해석과 관련하여 카타스트로피 이론을 적용할 수 있는 가능성을 다음과 같이 요약할 수 있다. 첫째, 카타스트로피 이론은 현재까지 수행된 구조불안정현상의 분류에 대한 일반화된 수학적 근거를 제공해 준다. 둘째, 카타스트로피 이론에 의하면 구조물에서의 초기결함 민감도 특성을 위상수학적인 방법론에 의해 적은 계산량으로 구할 수 있다. 셋째, 복잡한 좌굴현상 예를 들면 Modal Interaction, Compound Buckling의 현상이 발생하는 경우 좌굴점근처에서의 분기특성, 초기결함 민감도 특성을 효과적으로 규명하는 모델로서 고차카타스트로피를 이용할 수 있다.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.4
• /
• pp.133-140
• /
• 2010

This paper studies on the instability behaviour of the Seoul southwest baseball dome. The nonlinear Snapping phenomenon of the structure is investigated about the load mode by the design load of analysis structure and these combined loads. The initial imperfection obtains the buckling mode through the eigenvalue analysis of the tangential stiffness matrix and uses this for the nonlinear analysis. However, the buckling of members or the local buckling, and etc don't consider in the research range of this research task. Also it is limited the overall buckling phenomenon.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.6
• /
• pp.479-484
• /
• 2017

In this paper, finite element analysis of Steel-Concrete panel(SCP) was conducted considering the local buckling behavior and the optimized design of shear studs arrangement was studied by comparing with design guidelines. If the spacing of the studs of SCP is widened, it is easy to be manufactured and the weight fo members become lighter. On the other hand, the steel plate would be vulnerable to the local buckling behavior. Therefore, the guidance and design of SCP limit the maximum spacing of the studs to prevent the development of shear cracks and local buckling, however this is based on the design criteria of the other composite structures. Parameter studies with changes in stud spacing on steel plate and SCP are conducted and the obtained result was compared with values given in design guidelines.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.1044-1056
• /
• 1991

본 연구에서는 균일압축력을 받으며 네변이 단순지지된 비균일 두께를 가진 평판의 좌굴응력을 Rayleigh-Ritz방법으로 해석하여 평판두께를 적절히 분포함으로써 동일한 평판중량으로 더 큰 좌굴하중을 얻을 수 있음을 보이며 또한 동일한 문제를 NASTRAN프로그램을 사용하여 해석함으로써 그 정확도를 입증한다.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.5
• /
• pp.599-608
• /
• 2001

Many papers which deal with the dynamic instability of shell-like structures under the STEP load has been published but there have been few papers related to the dynamic instability of hybrid cable domes. And also there are a few researches which treat the essential phenomenon of the dynamic buckling using the phase for investigating occurrence of chaos. In this study the indirect buckling of hybrid cable domes considering geometric nonlinearity are investigated numerically and compared it with the static critical load The dynamic critical loads are determined by the numerical integration of the geometric nonlinear equation of motion and the mechanism of the indirect buckling is examined by using the phase curves.

• ETRI Journal
• /
• v.14 no.1
• /
• pp.108-117
• /
• 1992

광통신 시스팀에서 신호접속용으로 사용되는 광커넥터의 결합기구 중 세라믹 페룰-슬리브의 정렬기구에서 발생하는 성능저하 현상을 다루었다. 성능저하 현상으로 페룰 단면연마시 발생하는 Vertex Eccentricty, 좌굴현상, 환경에 따른 탄성 및 응력의 변화, 마모, 피로파괴 등에 대한 이론적인 배경과 실험결과를 토대로 특성에 대한 영향을 분석하였다.

• Computational Structural Engineering
• /
• v.9 no.3
• /
• pp.107-114
• /
• 1996

The performance for the algorithm of the arc length method has been examined in terms of the choice of the tangential stiffness matrix through the analysis for the snap buckling phenomenon of the arch beam. The curved beam element with 2 nodes including shear effect has been formed by strain element technique and then it has been used in this nonlinear analysis. Snap-through characteristics has been examined with respect to the ratios of the arch beam length to hight.

• Journal of the Korea Computer Graphics Society
• /
• v.8 no.1
• /
• pp.37-45
• /
• 2002

We present a cloth simulation technique that is very stable yet also responsive. The stability of the technique allows the use of a large fixed time step when simulating various types of fabrics and character motions. The animations generated using this technique are strikingly realistic. Wrinkles form and disappear in a quite natural way, which is the feature that most distinguishes textile fabrics from other sheet materials. Significant improvements in both the stability and realism were made possible by overcoming the post-buckling instability as well as the numerical instability. The instability caused by buckling arises from a structural instability and therefore cannot be avoided by simply employing an implicit method. Addition of a damping force may help to avoid instabilities; however, it can significantly degrade the realism of the cloth motion. In this paper, a new buckling model based on immediate buckling assumption is proposed. A cloth element is assumed to reach a stable configuration immediately once it begins to buckle. This assumption makes it possible to simulate the fabric buckling stably without introducing any fictitious damping force. Consequently, it produces highly responsive cloth motion as well as improves the stability by modeling the fabric-specific buckling property adequately.