• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.2
• /
• pp.88-96
• /
• 2017

Purpose: The purpose of this study is to assess the relationship between the time spent designing custom abutments and repeated learning using dental implant computer aided design (CAD) software. Materials and Methods: The design of customized abutments was performed four stages using the 3DS CAD software and the EXO CAD software, and measured repeatedly three times by each stage. Learning effect by repetition was presented with the learning curve, and the significance of the reduction in the total time and the time at each stage spent on designing was evaluated using the Friedman test and the Wilcoxon signed rank test. The difference in the design time between groups was analyzed using the repeated measure two-way ANOVA. Statistical analysis was performed using the SPSS statistics software (P < 0.05). Results: Repeated learning of the customized abutment design displayed a significant difference according to the number of repetition and the stage (P < 0.001). The difference in the time spent designing was found to be significant (P < 0.001), and that between the CAD software programs was also significant (P = 0.006). Conclusion: Repeated learning of CAD software shortened the time spent designing. While less design time on average was spent with the 3DS CAD than with the EXO CAD, the EXO CAD showed better results in terms of learning rate according to learning effect.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.6
• /
• pp.470-479
• /
• 2009

The local scour in waves can be thought of as very complex synthetic processes which is influenced by geology of bed material, bed flow in the sea and hydraulics condition. The most research until now be targeted at the scour depth and therefore the local scour width in waves has not been investigated as well. The size of wave or bottom velocity at the bed is direct cause of the local scour among lots of the scour effect factors, and the scour depth and width can be estimated through interrelationship analysis with scour area to use the dimensionless parameters including these such as Keulegan-Carpenter number, Ursell number etc. In this paper, to find out closely relation with the dimensionless parameters and scour width, performed an experiment with the variations of pipe diameters, wave heights and wave periods and then analyzed it. As the result, while Reynolds number and period parameter were seen to disperse local scour width largely, Shields number, KC number and Ursell number appeared good interrelationship. Specially, Shields number doesn't much affect the scour depth but has good relation for the scour width.

• Analytical Science and Technology
• /
• v.9 no.1
• /
• pp.43-51
• /
• 1996

We have discussed on the deintercalation process of Li-EaGICs and Li-EGICs synthesized under pressure and temperature by spontaneous oxidation reaction of those compounds based on the results of X-ray diffraction, thermal analysis and electrical specific resistivity analysis. According to the results of the X-ray analysis for the intercalation process, we have found that the stage 1 for Li-EaGICs and Li-EGICs were not completly formed, but their lower stages were formed mainly. And from this results of the deintercalation process, we have found that the deintercalation process did not occur any more after 4 weeks, and the Li-EGDICs have more residual lithium metals than LiEaGDICs between the graphite interlayers. According to the thermal decomposition analysis, Li-two compounds had included very hard exothermic reaction. And we have found that these compounds did not occrurred deintercalation reaction above $400^{\circ}C$. According to the results of the electrical specific resistivity measurements, Li-EGDICs have relatively lower electrical specific resistivity than Li-EaGDICs, and Li-EaGDICs showed a formation of the ideal curve. From these results, we can suggest that Li-EaGDICs have a better properties as an anode material secondary than Li-EGICs.

• Korean Journal of Plant Tissue Culture
• /
• v.22 no.5
• /
• pp.267-271
• /
• 1995

To improve regeneration efficiency of Brassica campestris ssp. pekinensis (chinese cabbage) in vitro, the effect of ehtylene inhibitors [AgNO$_3$ and silver thiosulfate (STS)] and optimal age of explantse were investigated. On the effect of ethylene inhibitors either 100 $\mu$M of AgNO$_3$ or 5 $\mu$M of STS enhanced shoot regeneration from cotyledons when it was added in basal shoot induction media(MS salts, B5 vitamine, sucrose 2%, BA 2.0mg/L, NAA 1.0mg/L). But at higher concentrations, AgNO$_3$ induced abnormal shoots, and STS greatly reduced regeneration frequency. On the other hand, the maximum regeneration rate was obtained from the cotyledons taken from 3-day old seedlings. However there was no distinctive effect among the containers used for cultivation. The most optimal condition of root induction was a minimal Murashige and Skoog media containing 0.1 mg/L NAA. In order to induce bolting and flowering from in vitro regenerated chinese cabbage, the plant were healed at 4$^{\circ}C$ for weeks in a cold chamber. When they were planted in pots, the plane produced phenotipically normal flowers and seeds. The overall results suggest that ethylene inhibitors promote regeneration of shoot from cotyledons of chinese cabbage without alleviating fertility.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.2
• /
• pp.119-124
• /
• 1997

Plantlets were regenerated from various explants (shoot tip, leaf blade, petiole and root segments) via organogenesis and/or somatic embryogenesis from Armoracia rusticana(Lam) Gaerth., Mey, et Scherb.. Shoot regeneration rate from callus was highest on the MS mediums supplemented with 0.5 ㎎/L IAA, 5.0㎎/L BA and 10.0㎎/L spermine. A Low frequency of regeneration occurred on hormone-free MS medium. Multiple shooks were regenerated at a pH of 4.0 to 8.0 on MS medium supplemented with 1.0 ㎎/L BA and 0.1 ㎎/L NAA. Polyamines promoted shoot- and root-formation by 2 to 4 times normal, Specific proteins associated with organogenesis were identified. Somatic embryogenesis occurred directly from the leaf blade, petiole and root segments cultured on MS medium with 2.0 ㎎/L BA and 2.0 ㎎/L BA and 2.0 ㎎/L NAA. Three types of regeneration in A, rusticana were clearly established, which could be applied to the study of morphogenesis and genetics at cell, tissue and organ levels.

• Journal of Plant Biotechnology
• /
• v.42 no.4
• /
• pp.388-395
• /
• 2015

Somatic embryogenesis is as an excellent technology for potential use in plant mass production, germplasm conservation, or genetic engineering. We examined the effect of cold storage using 3 embryogenic callus lines with different levels of embryogenesis competence derived from immature zygotic embryo cultures of Kalopanax setemlobus. Somatic embryo induction, germination and plant conversion were evaluated after 1, 3 and 6 months storage at $4^{\circ}C$ in the dark. Most cold-stored embryogenic calli formed somatic embryos normally even after 6 months; however, the induction rate was gradually decreased by increasing the storage period. The most competent line tended to show a slight decline in somatic embryo induction rate, as compared with other lines after cold storage. In general, cold storage resulted in reduced somatic embryo germination and plant regeneration, although 93% somatic embryo germination and 91% plant conversion were achieved regardless of the storage period. Cold storage led to cell browning and degradation. Additionally, the cell structures were confirmed by the aceto-carmine and evans blue dye evaluation. Collectively, our results showed that embryogenic callus of K. septemlobus could be preserved at $4^{\circ}C$ without subculture for 6 months, and suggested the need for storage of relatively more competent embryogenic calli lines to support somatic embryo induction.

• Journal of Welding and Joining
• /
• v.4 no.3
• /
• pp.13-25
• /
• 1986

철강 구조물의 용접기술에 있어 용접부의 신속성을 좌우하는 가장 중요한 요소는 용접균열에 관한 문제와 용접본드부의 취화에 관한 문제로 요약될 수 있다. 일반적으로 용접부 및 그 근방의 금속은 국부적으로 매우 높은 온도까지 급열된 후 급냉되므로, 용접부에서 각종균열의 발성 위험성이 높아지고 용접본드부를 취화하여 파양인성의 저하를 초래하게 된다. 따라서 이러한 문 제점을 극복하기 위해서는 재료의 선택이나 설계, 시공, 검사의 각 단계에서 충분한 검토가 필 요하다. 특히 최근 들어 이전보다 높은 강도의 고장력강재가 널리 사용되고 구조물의 대형화에 따라 구속조건이 증대되며 구조물의 사용 조건은 더욱 가혹 화함에 따라 상술한 문제점은 더욱 중요시되고 있다. 철강 용접부에 발생하는 균열은 용접시공시 발생되는 균열과 용접완료후 구 조물 사용중에 발생되는 균열로 대별될 수 있다. 용접시공중 발생되는 균열은 용접열싸이클로 인해 생성되는 조직, 석출물등의 치금학적 요인과 잔유응력 또는 구속응력등의 역학적 요인이 중첩됨으로서 발생된다. 또한 사용중 발생되는 균열은 상기의 두 가지 요인이외에 환경적 요인이 첨가되어 발생된다고 볼 수 있다. 이상과 같은 용접균열을 방지하기 위해서는 실 구조물 용접 조립시의 각종 조건을 재현한 시험법을 통해 용접균열 발생의 한계조건을 정량적으로 분석할 필요가 있다. 이러한 균열 시험의 결과, 적정한 용접 시공 조건이 도출될 수 있기 때문이다. 이와 같은 필요성에 의해 지금까지 다수의 용접균열 시험법에 관한 연구가 행하여져 왔고 그 중에는 각 국가의 협회나 학회의 규격으로 확립된 것도 많으며 국제규격으로 되어 있는 것도 있다. 본 고에서는 각종균열들에 대한 지금까지 밝혀진 기구들에 대해 해설하고, 그 각각에 적용되고 있는 시험법들에 대해 소개하고저 한다.C1지구의 공업.생활용수는 103units, 33units로 배분되고, 하류지구에 304units로 배분되었다. 따라서 용도별로 물배분하므로서 금호강 하루지역에 더욱 많은 물을 배분할 수 있음을 알았다.통해서 수위-유량관계(rating curve)를 규명하였다. 시험지구의 관개효율 및 용수손실 규명 등에 관한 기본자료를 수집하기 위해서는 계측시스템의 운영은 장기간으로 지속 되어야 한다며, 전기전도도와 토양수 농도, 전기전도도와 함수량의 관계를 이용한 천이상태의 오염원 농도 측정방법을 개발하였다. 특히 제안식에서는 한계함수량의 개념을 도입하여 전기전도도와 함수량관계를 추정하므로 추정식의 실험값 반영 정도를 증가시켰다. 본 연구에서 제안된 식을 이용하여 추정된 전기전도도와 함수량관계는 다른 제안식에 비하여 개선된 결과를 보여 주었고, 본 연구에서 개발한 오염원 농도 측정법을 이용하여 측정한 결과 함수량이 0.15이하에서는 측정오차가 크지만 함수량이 0.15이상일 경우 매우 좋은 결과를 보였는데 질량평형을 검토한 결과 약 5-10%의 오차율을 보였다. 따라서 본 논문에서 개발된 천이상태의 오염원 농도측정법은 용존 오염물질의 이송에 관한 정확한 실험을 제공할 것으로 판단된다.며, 수질 보전적-환경 보전 차원에서 저수관리 체계를 확고히 할 수 있는 방안을 강구하여야 할 것이다.펄스주입법에 의해 증착된 박박은 강유전성 이력을 나타내었다.지역과 비도시지역을 비교하는 조사 연구가 필요하며, 이러한 조사결과를 바탕으로 자녀의 식습관에 대한 교육을 위한 교재, 교구의 개발과 영양, 식습관 교육프로그램의 개발을 통해 가정과 학교에서 부모와 교사가 자녀의 식생활 지도 관리를 돕고 가정과 교육기관이 연계한 교육 프로그램이 활성화 될 수 있도록 지속적인 관심을 기울여 나가야 할 것이며, 이에 따른

• Journal of Bio-Environment Control
• /
• v.11 no.1
• /
• pp.29-34
• /
• 2002

An experiment was conducted to evaluate shattered industrial polyurethane (PUR) and cellular glass foam (CGF) as growth medium components. Pot chrysanthemum 'Pink Pixie Time 'was cuttured in media containing various volume ratios of PUR, CGF, peatmoss, coir, and perlite. Before plant culture, pH and EC of media were determined. Container capacity (%) was low in perlite and CGF-containing media, but it increased when incorporation ratio of peatmoss or coir was increased. pH was stable between 5.0 and 6.3, but was high in coir-contaning media as compared to other media tested. EC was very high in coir-containing media. Hight at 34 days after planting was the greatest in media containing CGF, and number. of leaves was similar among treatments. Growth in PUR-containinly media was poorer than that in the other media, with some leaf edge burning. Trends in growth measured at 97 days after planting was similar to that measured at 34 days after planting.

• Journal of Chest Surgery
• /
• v.31 no.11
• /
• pp.1037-1042
• /
• 1998

Background: Among the various techniques for the adequate exposure of the mitral valve, the extended transseptal approach is the essential prerequisite for accurate repair or replacement of the mitral apparatus. But the efficacy and safty of the extended transseptal approach has not determined in Korea yet. Materials and methods: Retrospective data of 80 consecutive patients, operated from September 1992 to July 1997 were reviewed. Seventy- eight patients underwent mitral valve replacement and 2 patients underwent excision of left atrial myxoma. Thirty-eight of 78 patients had other concomitant procedures such as aortic valve replacement(n=22), tricuspid annulopasty(n=14), coronary artery bypass graft(n=1) and closure of ventricular septal defect(n=1). Mean follow up was 23.3±15.0 months and total follow up was 1792 patient-months. Results: The hospital mortality rate was 3.8%(3 patients). Two deaths were due to low cardiac output and one due to postoperative bleeding of coagulopathy. Among the 46 patients who had atrial fibrillation preoperatively, 45 had atrial fibrillation postoperatively and 1 converted to sinus rhythm. All 34 patients who were in normal sinus rhythm preoperatively remained in sinus rhythm after the operation. Mean aortic cross clamping time was 62 minutes for isolated mitral procedure and 90 minutes for concomitant procedures. There were no specific complications related to this approach. Conclusions: We suggest that the extended transseptal approach is an easy and good method for mitral valve surgery, especially in patients with small sized left atrium.

• Journal of the Korean Arthroscopy Society
• /
• v.9 no.2
• /
• pp.194-200
• /
• 2005

Purpose: To evaluate the short-term follow up outcome and the effectiveness of arthroscopic vertical shift of anteroinferior capsulolabral complex, plication of AIGHLC (anterior band of inferior glenohumeral ligament complex) and thermal capulorraphy, posteroinferior suture plication, rotator interval closure as an adjuncts in recurrent instability of megafrequency with night time dislocation. Materials & Methods: From March 1998 to February 2004, we have had 18 shoulders out of 156. All of the cases have been night time dislocation above more one time. The age were average 29.4$(21{\sim}37)$ year old. The average follow up were 21.1 $(12{\sim}45)$months We checked Rowe score and ROM at pre-operation, post-operation 6 months,1 year & last follow up period. Results: Above good results were 16 cases(88.9%). The excellent were 6 cases, good were 10, fair 1, poor 1. Conclusions: In recurrent anterior shoulder dislocation in greater than 50 frequency, arthroscopic stabilization can be an alternative technique for selected patients against open inferior capsular shift. But more long ter n follow up and large materials will be needed in the future study.