• Tunnel and Underground Space
• /
• v.16 no.2 s.61
• /
• pp.109-134
• /
• 2006

Rocks undergo weathering processes influenced by changing in pressure-temperature condition, atmosphere, underground water, and rainfall. The weathering processes change physical and chemical characteristics of the rocks. Once the rocks are weathered, the characteristics of them are changed and, because of the changing, several disadvantages such as rock slope failures and underground water spouts are can occur. Before we cut a large rock slope, therefore, we must analyze current weathering conditions of rocks and predict weathering processes in the future. Through the results of such analyses, we can judge reinforcement works. In order to comply with such requests, chemical weathering sensitivity analysis which was analyzed from chemical weathering velocities and other characteristics of rocks has been applied in several prior construction works in Korea. But, It is defective to use directly in engineering fields because it was developed for soils(not rocks), it has too mny factors must be considered and the relationships between the factors are not clear, and it is hard to explain the weathering processes in engineering time range. Besides above, because it has been used for isotropic rocks, this method is hard to apply to anisotropic rocks such as sedimentary rocks. Acceding to studies from morphologists (e.g. Oguchi et al., 1994; Sunamura, 1996; Norwick and Dexter, 2002), time dependent strength reduction influenced by weathering shows a negative exponential function form. Appling this relation, one can synthesize the factors which influence the weathering processes to the strength reduction, and get meaningful estimates in engineering viewpoint. We suggest this weathering sensitivity characterization method as a technique that can explain time dependent weathering sensitivity characteristics through strength changes and can directly applied the rock slope design.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.3
• /
• pp.69-81
• /
• 2014

Herman $F{\ddot{u}}rst\;P{\ddot{u}}ckler-Muskau$ is one of important figures in German landscape architecture who designed both Muskau Park and Branitz Park and published garden book Andeutungen ${\ddot{u}}ber$ Landschaftgartenerei (Hints on Landscape Gardening) in 1834. He was a German nobleman who governed Muskau estates while working as both a writer and a landscape gardener. German landscape gardening was grounded on Romanticism, which was represented in diverse ways such as the reconciliation between man and nature, the liberation of reason, and the pursuit of liberty. The intellectuals came to have an interest on landscape gardening since the garden carried the cultural connotation such as the idealized epitome of nature. This study is to investigate how his idea of landscape gardening had been developed through his personal life and social background and to find out his landscape gardening theory and its unique gardening techniques. Finally, the inventive aspect of his garden theory and contemporary significances in practices were discussed. $P{\ddot{u}}cklers^{\prime}$ personal experience and social background provide us to understand the idea of garden. First, there was a mixture between reality and fantasy in his garden theory. It was due to the influence of Romanticism and literary garden. Second, his gardening mentality and technique were influenced by the late 18th century English garden practices, which emphasized the expressive aspects. Third, $P{\ddot{u}}cklers^{\prime}$ inner disposition and personal experience were represented in his garden design. Fourth, the intention of creating landscape garden for the local people might be a self realization of his contradictory characters between falling nobleman and liberal social leader. The significant value of $P{\ddot{u}}ckler^{\prime}s$ garden idea might be closely related in the dual nature of humanistic garden tradition and garden practice for social agenda. Therefore, his garden idea pursued of the comprehensive landscape strategies toward ideal communities and ethical spirits while concerning ecological, social, economic sustainable development of the region. Furthermore, his landscape gardening aims at the total landscape encompassing garden to region as well as the Gesamtkunst combing the beautiful with the useful. $P{\ddot{u}}ckler^{\prime}s$ holistic attitude gives us fresh insights and new directions to contemporary landscape theory and practice.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.4
• /
• pp.334-340
• /
• 2003

This study was conducted to evaluate the effects of dietary herbal extracts mixture on the growth rate. carcass traits and serological changes in finishing pigs. For the Exp 1, eighty Duroc(Yorkshir(Landrace pigs(81.58$\pm$3.20kg average initial body weight) were used in a 45 day experiment. Dietary treatments included 1) NC(negative control; antibiotics-free diet), 2) PC(positive control; NC diet added 0.1% of chlortetracycline), 3) NCM(NC diet added 0.1% of herbal plant mixture) and 4) PCM(PC diet added 0.1% of herbal plant mixture). Through the entire experimental period, ADG of pigs fed NCM and PCM diets was greater(P<0.08) than that of pigs fed NC diet. There was interaction of ADG(P<0.01) in pigs fed NC diet with herbal plant mixture compared to pigs fed PC diet with herbal plant mixture. ADFI and G/F tended to increase in PC and NCM treatments. However, there were not significantly differences among the treatments. Total protein of serum was improved by supplementation of the herbal plant mixture in NC diet(P<0.04). For the Exp 2. one hundred Duroc(Yorkshir(Landrace pigs(77.36$\pm$2.01kg average initial body weight) were used in a 28 day experiment. Dietary treatments included 1) NC(negative control; antibiotics-free diet), 2) PC(positive control; NC diet added 0.1% of chlortetracycline), 3) PM0.1(NC diet added 0.1% of herbal plant mixture) and 4) PM0.2(NC diet added 0.2% of herbal plant mixture). Through the entire experimental period, ADG tended to increase in PC treatment. However, there was not significantly difference among the treatments. Carcass weight in NC was higher than other treatments(P<0.06). Backfat thickness was higher in pigs fed PC than other treatments. However, there was not significantly difference among the treatments. A grade appearances of carcass tended to increase in pigs fed PM(P<0.09). In conclusion, the results of the experiments suggest that pigs fed PM could be a beneficial growth performance and serogical immunity for finishing pigs.

• Journal of Korea Water Resources Association
• /
• v.48 no.12
• /
• pp.1065-1075
• /
• 2015

In the estuary where the structure such as river-mouth weir has been installed, the flow is developed very complicatedly due to river water from upstream, tide of the sea and floodgate operation. Especially, if basin outlets more than one exists in one estuary, the boundary conditions will be significantly more complex form. Saemangeum(SMG) project area in Korea is the most typical example. There are Mankyung river and Dongjin river in upstream. The water of them inflows into SMG project area. In the downstream, river flow was drained from inland to sea over the SMG sea dike through the sluice. The connecting channel was located between Mankyung and Dongjin basins. It functions not only as transportation by ship in ordinary period but also as flood sharing by sending flood flow to each other in flood period. Therefore, in order to secure the safety against flood, it is very important to understand the flood sharing capacity for connecting channel. In this study, the flood control effect was analyzed using numerical simulation. Delft3D was used to numerical simulation and simulated period was set up with neap tide, in which the maximum flood stage occurred due to poor drainage. Actually, three connecting channels were designed in land use plan of the SMG Master Plan, but they were simplified to a single channel for conciseness of analysis in this study. According to the results of numerical analysis, the water level difference between two basins was increased and the maximum flood stage at dike sluice was also upraised depending on decrease of conveyance. And the velocity induced by same water level difference was decreased when the conveyance became smaller. In certain conveyance above, there was almost no flood control effect. Therefore, if the results of this study are considered for design of connecting channel, it will be expected to draw the optimal conveyance for minimizing dredging construction cost while maximizing the flood control effect.

• Korean Journal of Microbiology
• /
• v.44 no.3
• /
• pp.212-220
• /
• 2008

A Pn10 DNA probe was introduced as a Prevotella nigrescens ATCC $33563^T$-specific DNA probe. In that study, the specificity of the Pn10 was tested with only type or reference strains of 5 oral bacterial species. The purpose of this study is to evaluate the specificity of the Pn10 using the wild type strains of P. nigrescens and is to develop the P. nigrescens ATCC $33563^T$-specific PCR primers based on the nucleotide sequence of the Pn10. The specificity of the Pn10 DNA probe was determined by Southern blot analysis. The nucleotide sequence of Pn10 DNA probes was determined by chain termination method. The PCR primers were designed based on the nucleotide sequence of cloned DNA fragment. The data showed that Pn10 DNA probe were hybridized with the genomic DNAs from P. nigrescens ATCC $33563^T$ and KB6. The Pn10 homologous region, KB6-Pn10, of P. nigrescens KB6 was cloned by PCR and sequenced. The Pn10 and KB6-Pn10 DNA fragments were consisted of 1,875 bp and 1,873 bp, respectively. The percent identity of the two was 98.8% and the divergence of them was 0.6%. The two primer sets (Pn10-F-AC/ Pn10-R-AC and Pn10-F-A/ Pn10-R-A), designed base on the nucleotide sequences of Pn10 DNA probe, were specific to the P. nigrescens ATCC $33563^T$. The two PCR primer sets could detect as little as 4 pg of genomic DNA of P. nigrescens ATCC $33563^T$. These results indicate that the two PCR primer sets have proven useful for the identification of P. nigrescens ATCC $33563^T$, especially with regard to the maintenance of the strain.

• Journal of Korea Water Resources Association
• /
• v.47 no.5
• /
• pp.459-468
• /
• 2014

Groyne to control the direction and velocity of flow in rivers is generally installed for the purpose of protecting riverbanks or embankments from erosion caused by running water. In particular, as interest in river restoration and natural river improvement increases, groynes are proposed as a key hydraulic structure for local flow control and riparian habitat establishment. Groynes are installed mainly in groups rather than as individual structures. In case of groynes installed as a group, flow around the groynes change according to spacing in between the groynes. Therefore, groyne spacing is regarded as the most important factor in groyne design. This study aimed at examining changes of flows around and within the area of groynes that take place according to the spacing of groynes installed in order to propose the optimal spacing for upward groynes. To examine flow characteristics around groynes, this study looked at flows in main flow area and recirculation flow area separately. In main flow area, it examined the impact of flow velocity increasing as a result of conveyance reduction that is exerted on river bed stability in relation to changes in the maximum flow velocity according to installation spacing. As a factor causing impacts on scouring and sedimentation within the area of groynes, recirculation flow in the groyne area can lead problems concerning flow within the area and stability of embankment. As for recirculation area, an analysis was conducted on the scale of rotational flow and the flow around embankment that exerts impacts on stability of the embankment. In addition, a comparative analysis was carried with reference to changes of the central point of rotational flow that occur within the area of groynes. As a result of compositely examining the results, the appropriate installation spacing is proposed as min. four times-max. six times considering a decrease in flow velocity according to the installation of upward groynes, river bed stability and stability of embankments against counterflow within the area of groynes.

• Korean Journal of Microbiology
• /
• v.42 no.2
• /
• pp.89-94
• /
• 2006

The purpose of this study is to develop the strain-specific PCR primers for the identification of prevotella inter-media ATCC 49046 which is frequently used in the pathogenesis studies of periodontitis. The Hind III-digested genomic DNA of P. intermedia ATCC 49046 were cloned by random cloning method. The specificity of cloned DNA fragments were determined by Southern blot analysis. The nucleotide sequence of cloned DNA probes was determined by chain termination method. The PCR primers were designed based on the nucleotide sequence of cloned DNA fragment. The data showed that Pig6 DNA probe were hybridized with the genomic DNA from P. intermedia strains (ATCC $25611^T$ and 49046) isolated from the Westerns, not the strains isolated from Koreans. The Pig6 DNA probe were consisted of 813 bp. Pig6-F3 and Pig6-R3 primers, designed base on the nucleotide Sequences Of Pig6 DNA Probe, were 3150 specific to the only both P. intermedia ATCC $25611^T$ and P. intermedia ATCC 49046. In the other hand, Pig6-60F and Pig6-770R primers were specific to the only P. intermedia ATCC 49046. The two PCR primer sets could detect as little as 4 pg of chromosomal DNA of P. intermedia. These results indicate that Pig6-60F and Pig6-770R primers have proven useful for the identification of P. intermedia ATCC 49046, especially with regard to the maintenance of the strain.

• Journal of vocational education research
• /
• v.35 no.4
• /
• pp.131-153
• /
• 2016

The purpose of this study was to derive evaluator's role and capability for institution accreditation evaluation of NCS-based vocational competency development training. This study attempted to explore in various ways evaluator's minute roles using Delphi method, and to derive knowledge, skill, attitude and integrity needed to verify the validity. To the end, this study conducted the Delphi research for over three rounds by selecting education training professionals and review evaluation professions as professional panels. From the results, roles of evaluators were defined as the total eight items including operator, moderator-mediator, cooperator, analyzer, verifier, institution evaluator, institution consultant, and learner, and the derived capabilities with respect to each role were 25 items in total. The area of knowledge included four items of capabilities such as HRD knowledge, NCS knowledge, knowledge of vocational competency development training, and knowledge of training institution accreditation evaluation, and the area of skill comprised fourteen items of capabilities such as conflict management ability, interpersonal relation ability, word processing ability, problem-solving ability, analysis ability, pre-preparation ability, time management ability, decision making ability, information comprehension and utilization ability, comprehensive thinking ability, understanding ability of vocational competency development training institutions, communication ability, feedback ability, and core understanding ability. The area of attitude was summarized with the seven items in total including subjectivity and fairness, service mind, sense of calling, ethics, self-development, responsibility, and teamwork. The knowledge, skill and attitude derived from the results of this study may be utilized to design and provide education programs conducive to qualitative and systematic accreditation and assessment to evaluators equipped with essential prerequisites. It is finally expected that this study will be helpful for designing module education programs by ability and for managing evaluator's quality in order to perform pre-service education and in-service education according to evaluator's experience and role.

• Journal of Korea Water Resources Association
• /
• v.52 no.9
• /
• pp.627-635
• /
• 2019

In Korea, snow damage has been happened in the region with no snowfalls in history. Also, casual damage was caused by heavy snow. Therefore, policy about the Natural Disaster Reduction Comprehensive Plan has been changed to include the mitigation measures of snow damage. However, since heavy snow damage was not frequent, studies on snowfall have not been conducted in different points. The characteristics of snow data commonly are not same to the rainfall data. For example, some parts of the southern coastal areas are snowless during the year, so there is often no values or zero values among the annual maximum daily snow accumulation. The characteristics of this type of data is similar to the censored data. Indeed, Busan observation sites have more than 36% of no data or zero data. Despite of the different characteristics, the frequency analysis for snow data has been implemented according to the procedures for rainfall data. The frequency analysis could be implemented in both way to include the zero data or exclude the zero data. The fitness of both results would not be high enough to represent the real data shape. Therefore, in this study, a methodology for selecting a probability density function was suggested considering the characteristics of snow data in Korea. A method to select probability density function using conditional joint probability distribution was proposed. As a result, fitness from the proposed method was higher than the conventional methods. This shows that the conventional methods (includes 0 or excludes 0) overestimated snow depth. The results of this study can affect the design standards of buildings and also contribute to the establishment of measures to reduce snow damage.

• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.292-299
• /
• 2018

In a survey in which farmers were asked about their levels of satisfaction with agricultural machines, Japanese products scored higher than local products by 1.2, 1.3, and 1.4 times for tractors, combine harvesters, and rice transplanter, respectively. Japanese products corresponded to generally high satisfaction levels in terms of operating performance, operability, frequency of breakdowns, and durability, excluding sales price and after-sales services. Effective countermeasures through quality improvement are therefore necessary for Korean products. Furthermore, a survey of dealers showed that the components and consumables for core agricultural machines had high frequencies of breakdowns and repairs. Four major components of tractors represented 85.3% of all breakdowns and repairs, five components of combine harvesters represented 89.6%, and three components of rice transplanters represented 80.5%. Moreover, a comparison of the technological levels between local and imported machines showed that the local machines' levels were at 60-100% for tractors, 70-100% for combine harvesters, and 70-95% for rice transplanters. Small and mid-sized tractors, 4 interrow combine harvesters, and 6 interrow rice transplanters showed similar levels of technology. The results of the analysis suggest that action is urgently needed at a policy level to establish an agricultural machinery component research center for the development, production, and supply of commonly-used components, with the participation of manufacturers of agricultural machines and components, in order to enhance the competitiveness of local manufacturers and to revitalize the agricultural machine market.