• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.85-85
• /
• 2011

화학적 혹은 생물학적인 방법으로 합성된 생분해성 고분자(biodegradable polymers)는 환경 문제와 인간의 생명 유지와 같은 인간 생활과 밀접한 관계가 있는 적용 분야로 인해 많은 관심을 받고 있으며, 국내 플라스틱의 폐기량만 해도 2003년을 기준으로 연간 4,000톤을 쉽게 넘고 있고 재활용되는 양은 전체의 1/3 수준이며, 나머지 2/3는 소각되거나 매립되고 있다. 폴리에스테르계 생분해성 섬유는 "미생물이 분비하는 효소로, 분해 가능한 화학합성 섬유"로서, 미생물이 분비하는 가수분해 효소에 의해 고분자 쇄가 절단, 저분자량 화합물이 돼 미생물의 체내로 흡수되며, 이것이 미생물의 체내에서 효소작용에 의해 산화탄소와 물로 분해되는 섬유로 정의된다. 생분해성 고분자 중 화학합성 고분자인 지방족 폴리에스테르계 생분해성 고분자는 특히 환경 산업으로부터 많은 관심을 받고 있으며, 이러한 결정성 폴리에스테르계 고분자의 물성은 고분자의 결정화도 뿐만 아니라, 압력, 온도 등에 의해서 변할 수 있는 결정 구조에 의해 크게 영향을 받는다. 생분해성 섬유는 실용화가 이미 시작됐고, 다용도화와 수요 확대를 위해 많은 연구소와 대학, 기업들이 연구개발을 진행하고 있으며, 향후 석유자원이 고갈된다는 것은 명백한 사실이므로 이에 따라 화석자원의 절약과 유효 이용을 위해서라도 바이오 베이스 폴리머를 주원료로 한생분해성 섬유의 개발은 매우 중요한 의미를 갖는다. 본 연구에서는 합성섬유 중에서 75%의 비중을 차지하는 폴리에스테르를 대체 가능한 고내열생분해성 폴리에스테르계 직물을 제조하여 범용 폴리에스테르와 염색온도에 대한 염색성을 고찰하였다. 염색온도($100^{\circ}C$, $110^{\circ}C$, $120^{\circ}C$, $130^{\circ}C$)별, 3종의 분산염료의 농도(0.25,0.5,1.0,2.0%o.w.f)별 Build-up성 및 균염성을 비교하였으며, 염색 시료의 견뢰도를 평가하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.787-790
• /
• 2003

A 4-wavelength optical transceiver system is designed and implemented by using 4 OADMs (optical add-drop multiplexers), WDMs, and optical transceivers. In this new system, the wavelengths of 1510 nm and 1530 nm are used for upload and download signals, respectively, as well as the wavelengths of 1550 nm and 1310 nm which have been utilized in a 2-wavelength optical transceiver systems. The 4-wavelength optical module shows very encouraging pass characteristics of about - 5 dB and isolation characteristics of less than -40 dB, which is configured with two OADMs, 4 couplers, and WDM couplers by fusion splicing. Noise figure (NF) of the one-stage balanced amplifier designed and fabricated for receiver module is 0.38 dB and the amplifying gain is 14.2 dB. S$_{11}$, S$_{22}$ and input, output VSWR are -28.81 dB, -32.08 dB, 1.05 : 1, 1.08 : 1, respectively.y.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.406-409
• /
• 2003

In this paper, a 4-wavelength optical transceiver system is designed and implemented by using TFF (thin film filter) type OADMs (optical add-drop multiplexers). In this new system, the wavelengths of 1510 nm and 1530 nm are used for uploa and download signals, respectively, as well as the wavelengths of 1550 nm and 1310 nm which have been utilized in a 2-wavelength optical transceiver systems. The 4-wavelength optical module show pass characteristics of -1.6 dBm, -1.7 dBm, -5.6 dBm, -5.8dBm for 1510nm, 1530 nm, 1550 nm, 1570 nm, respectively, with 1.2 dBm of input laser power. The isolation for characteristics of the optical module for all the wavelengths are less than -40dB, which is very acceptable for filed requirements.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.3
• /
• pp.195-199
• /
• 1998

To induce the cellulolytic variants of oyster mushroom (Pleurotus ostreatus), basidiospores were irradiated at the dose of $1kGy{\sim}20kGy$ of gamma-ray. After irradiation, activities of extracellular enzymes were determined by the method of MUF residue and genetic similarity was observed by RAPD analysis of variants. Three variants of 2KG-1, 2KG-2 and 20KG-1 were clarified as highly cellulolytic isolates. It seemed that the difference of genetic similarity among variants have derived from gamma-ray radiation. It is suggested that 3 cellulolytic variants induced by gamma-ray in this experiment could play a useful role to reuse cellulosic bioresources.

• Analytical Science and Technology
• /
• v.11 no.5
• /
• pp.394-399
• /
• 1998

This study was carried out to characterize the chemical composition and leaching properties of heavy metals in coal fly ash, which was generated from Korean electrical power utilities in several million tons per year. Comparion with respect to the leachability of heavy metals between the Korea standard leaching test (KSLT) and the American Environment Protection Agency (EPA) method 1311 (TCLP: Toxicity Chracteristic Leaching Procedure) was performed. The concentration of Ag, As, Ba, Cd, Cr, Cu, Pb, Se, Hg in the leacheate was determined by ICP-MS. The analytical result showed a significant difference of the leachability according to the characteristics of the leaching solution except Se, suggesting the necessity of improvement in the leaching test method that is currently implemented in Korea.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2000.04a
• /
• pp.23-36
• /
• 2000

Hurdle technique was used to remove cholesterol efficiently from liquid egg yolk. The quality of the low cholesterol egg products from the process were evaluated. From the 75 % cholesterol reduced egg yolk through $\beta$-cyclodextrin treatment. 2 times weight of soy bean oil was added to the egg yolk and homogenized followed by centrifuged to be maximized to remove cholesterol. When the pH of the yolk was adjusted to 9, 92 % of cholesterol was removed while 95.4 % of cholesterol was removed when 3 times weight of soy bean oil was added to the egg yolk. As the results of application of supercritical carbon dioxide extraction to the 75 % cholesterol reduced egg yolk through ${\beta}$-cyclodextrin treatment, 92.5 % of the cholesterol was removed from the egg yolk at $35^{\circ}C$, 4,500 psi, for 4 hours under co-solvent. The quality characteristics of the produced low cholesterol egg products were analysed. The cholesterol reduced egg yolk produced from ${\beta}$-cyclodextrin and soy bean oil treatment showed the lower emulsion capacity compared with control. The fatty acid composition of the cholesterol reduced egg yolk produced from ${\bet}a$-cyclodextrin and soy bean oil treatment showed increased C18:2 and C18:3 compared with control while decreased C16:1 and C18: 1 compared with control. The saponification method with extracting solvent of hexane showed that cholesterol concentration was 28.1 %. The quantity of hydrolysis solution(95 % ethanol : 33 % KOH = 94 : 6) was varied from 40 to 80 times of sample weights and the cholesterol concentration of 35.7 % was the highest result in the 60 times(v/w) hydrolysis solution. Cholesterol concentration of 35.7 % was recovered at the first trial with saponification method. but it could be improved up to 95.7 % after 4 times repetitive purification.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.10
• /
• pp.15-24
• /
• 2010

In the case of underground power utilities pipe such as circular pipe, the most difficult problem is low compaction efficiency of the bottom of pipe inducing the failure of utilities. To overcome this problem, various studies have been performed and one of these is CLSM(Controlled Low Strength Materials) accelerated flow ability. But underground power utilities pipe backfill materials is also needed to have good thermal property that can dissipate the heat as rapidly as it is generated. So, in this study, we performed thermal resistancy test for various materials such as sand, weathered soil, clay and mixed soil to analyze the thermal characteristics of CLSM(Controlled Low Strength Materials) with accelerated flow ability for various conditions(water content, unit weight, void ratio, curing time) and to evaluate the applicability for backfill material of underground power utilities pipe. The test results of 16 specimens for thermal resistancy test showed good thermal property that maintained below $85^{\circ}C\;cm/W$.

• Resources Recycling
• /
• v.14 no.4 s.66
• /
• pp.3-9
• /
• 2005

In this study, the utilization possibility of coal-preparation refuse emitted from Hwasun coal mine in Korea as a raw material for ceramic body was investigated. The firing shrinkage ratio of ceramic specimen made from the coal-preparation refuse was reduced with increasing the addition amounts of that, while the compressive strength was slightly decreased. The weight of ceramic body was also reduced because carbon contained in the coal-preparation refuse was burn by fring. The water adsorption ratio of the ceramic specimen was under 10 wt%, and the compressive strength of that was over 21 MPa at over $1,150^{\circ}C$ for 2 hr. Therefore, it was possible to make the 1st garde clay brick of KS L 4201 from the coal-preparation refuse.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.63-72
• /
• 1999

For the purpose of improving the wet strength properties of paper, cellulosic fibers were modified by the processes of carbarmoylethylation and N-chlorocarbamoylethylation. Carbamoylethylated cellulose was prepared by the reaction of acrylamide with cellulosic fibers under the alkali catalyst, and N-chlorocarbamoylethylated cellulose was prepared by the addition of sodium hypochlorite into the carbamoylethylated cellulose. In carbamoylethylation reaction, the conditions of NaOH concentration, temperature and acrylamide addition rate were considered to be important factors. An initial reactivity and degree of substitution(DS) in carbamoylethylation of cellulosic fibers were effective according to increasing the addition rates of alkali, acrylamide and the temperature condition of $40^{\circ}C$. The effective wet strength properties by N-chlorocarbamoylethylation of cellulosic fibers were indicated under the conditions of DS 0.06. The wet strength of sheet was improved to 85% at the 100% basis of dry strength. From the photograph of scanning electron microscopy, fiber cuttings on the edge of sheet sample used in tensile strength testing were found in the N-chlorocarbamoylethylated sheet, due to the improvement of fiber bonding strength. The hypochlorite treatment was effective in the recycling of N-chlorocarbamoylethylated sheet, and was reduced the wet strength of sheet to be able to reslush.

• Resources Recycling
• /
• v.16 no.5
• /
• pp.25-30
• /
• 2007

In Korea, reutilization of construction waste is gaining attention as construction waste generated increases continuously. Currently, the concrete waste is simply crushed and used as a low value application such as paving, back filling, etc. To meet the demand of aggregate for construction and the resource efficiently, production of high quality recycled aggregate is necessary. Therefore, in this study, a better process for production of high quality recycled aggregate was developed using combination of heat pretreatment and autogenous milling. Test results showed that the recycled aggregate has a density of $2.5\;g/cm^3$ and a water absorption ratio of 3.0%, which meet the specification of the first class of KS F 2573. Currently, a pilot scale autogenous mill is being constructed and tests will be further conducted to develop a commerce-scale process.