• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.1023-1029
• /
• 2010

In this paper, we proposed the broadband polarization diversity antenna operating in the PCS, WCDMA and WiBro band for mobile base station. We designed the antenna using the dipole antenna of the square loop type and microstrip feeding structure. Additionally, we used the choke box to remove the distortion of radiation patterns by the reflector structure when operating broadband. The simulation was performed using MWS in a commercial tool of CST company and the antenna was fabricated on a teflon substrate with 3.33 of the relative permittivity. The proposed antenna has the bandwidth of 640 MHz(from 1.75 to 2.39 GHz) when VSWR is below 1.5. At the operating bands, the interisolation between the cross-pair radiators is less than -25 dB and the maximum gains for PCS, WCDMA and WiBro band are 8.9, 8.2 and 8.6 dBi, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.280-280
• /
• 2011

유도결합 플라즈마를 이용한 식각 장치에서 플라즈마 균일도 향상에 대한 수많은 연구가 이뤄지고 있다. 안테나의 디자인, 인가 전력과 주파수, 안테나와 기판간의 거리, 기판과 챔버 외벽간의 거리 등 다양한 변수들이 변화되어 왔다. 또한, 최근에는 식각 균일도뿐만 아니라 식각 속도 향상에도 많은 관심이 모아지면서 유동에 영향을 주는 GDP 구조가 다시 중요해지고 있다. 본 연구에서는 300 mm 식각장치를 형상화하고, GDP의 구조와 유량비에 따라 플라즈마의 균일도에 어떻게 영향을 끼지는지 사용 유체역학 전산모사 프로그램인 CFD-ACE+를 이용하여 예측해 보았다. 안테나는 2중 직렬방식으로 안쪽과 바깥쪽의 안테나에 각기 다른 전력을 인가 할 수 있는 구조를 사용했으며, 압력은 10에서 60 mTorr까지 변화시켰다. GDP의 구조는 안쪽 입구와 바깥쪽 입구가 있으며 역시 따로 유량을 조절할 수 있도록 설계하였다. 안쪽 입구는 수직방향을 향하고 있으며, 바깥쪽 입구는 90도 이내의 각을 갖도록 꺾여 있는 것과 수평방향으로 주입할 수 있는 구조, 두 가지를 사용하였다. 유량 비율은 안쪽 입구와 바깥쪽 입구를 2:8, 5:5, 8:2로 고정하였다. 우선 GDP의 구조가 90이내의 각을 갖도록 주입되는 구조에서는 어떤 유량비율에서도 약간의 vortex가 발생했다. 수직방향의 유량이 감소될수록 기판에서 멀리서 발생했으며 강도 또한 감소했다. 기판 표면에서의 압력분포 균일도도 8:2에서 2.8%, 2:8에서 0.6%로 향상되었다. 2:8의 유량 비율에서 압력을 10에서 60 mTorr까지 향상시키면 vortex 효과는 감소되나 기판에서의 압력 균일도가 0.8%까지 약간 나빠졌다. 여기서 발생되는 vortex는 GDP 구조를 수평방향으로 주입되기 함으로서 해결할 수 있었으며, 압력 균일도도 0.2%까지 향상시킬 수 있었다. 또한, 강한 수직방향의 유량은 중심에 발생하는 플라즈마의 중앙을 밀어내는 효과를 확인했으며, 실험적 증명이 추후 연구단계로 진행될 예정이다. 식각 균일도나 식각 속도를 예측하려면 CF계열의 복잡한 가스를 사용해야하기 때문에 유량이 플라즈마에 미치는 영향을 보기 위해서 본 연구에서는 단일종인 Ar 가스만을 사용하였다. 첫 단계로 이와 같이 최적화시킨 유동조건에서 복잡한 식각가스를 이용한 플라즈마 계산은 다음 단계로 준비 중에 있다.

• Journal of fish pathology
• /
• v.7 no.2
• /
• pp.83-94
• /
• 1994

Bonnierilla namhaesius n, sp, is described based on the specimens recovered from the ascidians, Halocynthia roretzi Von Drasche in Namhae Islands, Korea, This is distinguished from congeners by having a combination of characters : setal formula 3, 17+1 hook, 9+1 aesthete, 5, 3, 2, 2+1 aesthete, 7+1 aesthete respectively on eight segments of antennule, II, 5 on distal segment of the second leg to fourth leg exopod, and 2, 3, I on distal margin of caudal ramus. This is the second record of the male, and first record of the copepodid in the genus Bonnierilla.

• Journal of Internet of Things and Convergence
• /
• v.10 no.2
• /
• pp.61-67
• /
• 2024

In order to monitor the growth environment of new varieties of crops, it is necessary to build the agricultural production infrastructure and strengthen the agricultural resource management system using popular smart sensor tag technology. In addition, the infrastructure for improving high-quality new varieties of crops using IoT technology and the monitoring system must be strengthened. In other words, widespread smart sensor (RFID UHF Sensor Tag) technology for environmental monitoring required for improving new crop varieties is desperately needed in the smart farm environment. Therefore, in this paper, we implemented an integrated sensor that can implement smart tag functions based on heterogeneous integrated sensors. In addition, we developed a technology that can manage crops in real time through the implemented smart integrated tag and smartphone linkage. For this purpose, an integrated antenna capable of RFID and Bluetooth communication was constructed. In addition, a communication method that allows information to be collected directly from the smartphone through the Bluetooth function was used.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.4 s.19
• /
• pp.53-60
• /
• 2004

In this paper, the radar antenna of navigation radar on helicopter was suggested to Ka-band lens antenna. It is type of the streamlined convex lens to reduce the air resistivity when helicopter was navigated. Although aperture area is smaller than the standard antenna just like horns, the gain is higher and beamwidth is smaller than standard horns. We made the lens by using maximum flare angle of the horn and dielectric constant of the lens. As a result, when aperture diameter was 280mm and focal length was 145mm, the return loss -21.25dB, the gain was 32.2dBi, E and H beamwidth was $1.8^{\circ}$(E-plane), $1.4^{\circ}$(H-plane), nearly $1.5^{\circ}$, and side-lobe level was -18.4 dB(E-plane), -19.5dB(H-plane) lower were presented. So this suggested type can be used for the radar antenna of navigation radar on helicopter, and it will possible just a little some sidelobe suppression by using the choked horn as a feeder horn.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9A
• /
• pp.906-912
• /
• 2006

In this paper, N-shaped slot antenna for $5.15GHz{\sim}5.35GHz$ is designed, fabricated, and measured. The prototype consist of meander corrugated N-shaped slot. To obtain suitable bandwidth, the form layer is inserted between ground plane and substrate. Important parameters in the design are N-slot length, width, position, air-gap height, and feed point position. From these parameters optimized, a four N-shaped slot antenna is fabricated and measured. The measured results of the antenna are obtained as follows results. The resonant frequency of the fabrication N-shaped slot antenna is 5.25GHz bandwidth for approximately 300MHz(VSWR<2.0) and the gain is $1.3{\sim}2.64dBi$. The experimental far-field patterns are stable across the pass band. The 3dB bandwidth in H-Plane and E-Plane are $80.21^{\circ}\;and\;103.38^{\circ}$, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2A
• /
• pp.195-201
• /
• 2004

In this paper, U-Shaped slot Bow-Tie antenna for 5.15㎓∼5.35㎓ is designed, fabricated, and measured. The prototype consist of U-Shaped slot. To obtain suitable bandwidth, the form layer is inserted between ground plane and substrate. Important parameters in the design are U-slot length, width, position, air-gap height, and feed point position. From these parameters optimized, a U-shaped slot Bow-Tie antenna is fabricated and measured. The measured results of the antenna are obtained as follows results. The resonant frequency of the Fabrication U-shaped slot Bow-Tie antenna is 5.28㎓, bandwidth for approximately 7.76％(VSWR<1.2) and the gain is 4∼7dBi. The experimental far-field patterns are stable across the pass band. The 3dB bandwidth in Elevation and Azimuth are 73.63$^{\circ}$and 65.08$^{\circ}$, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3A
• /
• pp.303-310
• /
• 2004

In this paper, L-shaped slot antenna for 5.15㎓-5.35㎓ is designed, fabricated. and measured. The prototype consist of four L-shaped slot. To obtain suitable bandwidth, the form layer is inserted between ground plane and substrate. Important parameters in the design are four L-slot length. width, position, air-gap height. and feed Point position. From these parameters optimized, a four L-shaped slot antenna is fabricated and measured. The measured results of the antenna are obtained as follows results. The resonant frequency of the fabrication four L-shaped slot antenna is 5.25㎓, bandwidth for approximately 5％(VSWR＜1.5) and the gain is 8-9㏈i. The experimental far-field patterns are stable across the pass band. The 3dB bandwidth in H-Plane and I-Plane are 69$^{\circ}$and 62$^{\circ}$, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.288-300
• /
• 2002

In this paper, a novel method of equalization of RF transceivers is suggested for MIMO(Multiple Input Multiple Output) antenna actively studied for high speed data transmission in the recent IMT-2000 system. The core of suggestion is in equalizing the transfer characteristics of multiple transceivers using feedback and memory during the predefined calibration time. This makes it possible to weight the signals in the intermediate frequency, which is easier in the application of recently developed DoA(Direction of Arrival) algorithms. In addition, the time varying optimum cell formation according to traffic is feasible by antenna beam-forming based on the DoA information. The suggested method of equalizing multiple transceivers are successfully verified using envelope simulation. two outputs. This paper is concerned with the diagnosis of multiple crosstalk-faults in OSM. As the network size becomes larger in these days, the convent.
nal diagnosis methods based on tests and simulation be.
me inefficient, or even more impractical. We propose a simple and easily implementable alg？ithm for detection and isolation of the multiple crosstalk-faults in OSM. Specifically, we develop an algorithm for isolation of the source fault in switc.
ng elements whenever the multiple crosstalk-faults are.
etected in OSM. The proposed algorithm is illustrated by an example of 16$\times$16 OSM.

• Journal of Life Science
• /
• v.17 no.1 s.81
• /
• pp.82-90
• /
• 2007

In an attempt to establish the appropriate ventilation device for the bottle culture of king oyster mushroom (Pleurotus eryngii), we investigated carbon dioxide concentration and fruiting body formation according to the various ventilation systems within the mushroom house. In addition to, the efficiency of air circulation and growth rate as well as the appearance of physiologically abnormal phenotypes during their growth stage were also evaluated. four different ventilation devices, parallel-pressure type, positive-pressure type, negative-pressure type, and positive- and negative-pressure type were applied in this study. The positive-and negative-pressure type showed the highest efficiency of air circulation as $CO_2$ concentration was 800 ppm and the level of air current was relatively low compared to the other types (the $CO_2$ concentration of parallel-pressure type was 1,400 ppm). Moreover, the stipe length, the cap diameter, yield, and general quality grown in positive- and negative type ventilation device were also better than in the other three devices though it took slightly longer period for harvesting (18.4 days) than the others (17.6, 17.9 and 18.3 days). The appearance of physiologically abnormal phenotypes such as fruiting body lump, soft rot, and brown rot were significantly decreased in positive-and negative type compared to other types, while the appearance rates were not much different for other symptoms of bacterial ooze, stipe limb and stipe bumpy. In summary, we propose that the optimal ventilation system for the bottle culture of king oyster mushroom is positive- and negative type, and this device is expected to increase the total quality as well as yield all year around.