• Journal of Auto-vehicle Safety Association
• /
• v.12 no.4
• /
• pp.13-22
• /
• 2020

This paper presents an adaptive feedback based actuator fault detection and tolerant control algorithms for longitudinal functional safety of autonomous driving. In order to ensure the functional safety of autonomous vehicles, fault detection and tolerant control algorithms are needed for sensors and actuators used for autonomous driving. In this study, adaptive feedback control algorithm to compute the longitudinal acceleration for autonomous driving has been developed based on relationship function using states. The relationship function has been designed using feedback gains and error states for adaptation rule design. The coefficients in the relationship function have been estimated using recursive least square with multiple forgetting factors. The MIT rule has been adopted to design the adaptation rule for feedback gains online. The stability analysis has been conducted based on Lyapunov direct method. The longitudinal acceleration computed by adaptive control algorithm has been compared to the actual acceleration for fault detection of actuators used for longitudinal autonomous driving.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.2
• /
• pp.26-38
• /
• 2022

This paper proposes multiple RLS and actuator performance index-based adaptive actuator fault-tolerant control and detection algorithms for longitudinal autonomous driving. The proposed algorithm computes the desired acceleration using feedback law for longitudinal autonomous driving. When actuator fault or performance degradation exists, it is designed that the desired acceleration is adjusted with the calculated feedback gains based on multiple RLS and gradient descent method for fault-tolerant control. In order to define the performance index, the error between the desired and actual accelerations is used. The window-based weighted error standard deviation is computed with the design parameters. Fault level decision algorithm that can represent three fault levels such as normal, warning, emergency levels is proposed in this study. Performance evaluation under various driving scenarios with actuator fault was conducted based on co-simulation of Matlab/Simulink and commercial software (CarMaker).

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.1115-1117
• /
• 2010

안전운전 지원 시스템 개발을 위해서 고려되어야 할 요소는 차량정보, 운전자정보, 외부 환경정보가 있다. 기존의 안전운전 지원 시스템 개발은 주로 차량의 종방향 제어, 횡방향 제어, 조향각 제어 등 차량으로부터 직접 추출한 주행정보를 이용하여 운전자의 안전유무를 평가하였다. 그러나 최근의 조사결과에 따르면 교통사고의 90%이상이 운전자 실수에 의해서 발생한다는 것을 알 수 있다. 이와 관련하여 차량의 주행 정보뿐만 아니라 실제 운전자가 주행 중에 행하게 되는 행동정보기반의 안전운전지원시스템 개발이 활발히 연구되어 지고 있다. 본 논문에서는 운전자의 행동정보를 이용한 안전운전 평가시스템의 설계 개념과 안전운전 평가시스템의 핵심 요소인 표준모델 구축 방법에 대해서 논의하고자 한다.

• Journal of Auto-vehicle Safety Association
• /
• v.4 no.1
• /
• pp.12-17
• /
• 2012

ADAS(Advanced Driver Assistance System) which is developed for alleviating driver's load has become improved with extending it's role. Previously, ADAS offered simple function just to make driver's convenience. However, nowadays ADAS also acts as Active Safety system which is made to release and/or prevent accidents. Longitudinal control system, as one of major parts of Active Safety System, is assessed as doing direct effect on avoiding accidents. Therefore, many countries such as Europe and America has pushed longitudinal control system as a government-wide project. In this paper, it covers the result of evaluation system and vehicle evaluation for development study in FCW, ACC and AEB.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.2
• /
• pp.25-31
• /
• 2015

This paper presents a performance evaluation procedure for advanced emergency braking (AEB) system. To guarantee the performance of AEB system, AEB test scenario should contains various driving conditions which can be occurred in real driving condition. Also, performances of each elements of AEB system, such as sensor, decision, human machine interface (HMI) and control, should be evaluated in various situations. For this, driving conditions, road types, environment, and elements of AEB system were introduced. Test scenario has been designed to represent the real driving condition and to evaluate the safety performance of AEB system in various situations. To confirm that the proposed AEB test scenario is realistic and physically meaningful, vehicle test have been conducted in two cases of proposed AEB test scenario: subject vehicle cut-out scenario and narrow street turn left scenario.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.392-397
• /
• 2006

This paper proposed yaw moment control scheme using braking and active rear wheel steering for improving driving stability especially in high speed driving. Its characteristics the unified chassis control system of two equipment that 4WS(4 Wheel Steering) and ESP(Electronic Stability Program). in this study the performance of the vehicle was compared each equipment. And conventional ABS and TCS can only possible to control the longitudinal movement of braking equipment and drive which can only available to control of longitudinal direction. There after new braking system ESP was developed, which controls both of longitudinal and lateral, with adding of the function of controlling Active Yaw Moment. On this paper, we show about not only designing of improved braking and steering system through establishing of the integrated control system design of 4WS and ESP but also designing of the system contribute to precautious for advanced vehicle stability problem.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.5
• /
• pp.21-30
• /
• 2019

While the study of the shallow tunnel has been mainly on the longitudinal load transfer and horizontal surface conditions, the study of the ground behavior of shallow tunnel under the slope is not sufficient. Therefore, in this study on the ground behavior around a tunnel due to the sidewall deformation of shallow tunnel under the slope that is excavated in longitudinal direction, a scale-down model test has been performed. The model tunnel has the dimension of 320 mm wide, 210 mm high and 55 mm long with enough material strength in aluminum and the model ground has the uniform ground conditions by 3 types of carbon rods. The model test has been performed with the variables of slopes and the cover depths by controlling the tunnel sidewall deformation, and the change of sidewall-load, load transfer, ground subsidence was monitored and analyzed. According to the increase of the slope, the maximum ground subsidence increased by 20~39% compared to the horizontal surface. The load ratio increased by maximum 20% in the tunnel crown and decreased in sidewall according to the surface slope. The load transfer shows maximum 128% of increase at the cover depth of 1.0D, while at the 1.5D cover depth it shows non-critical difference from horizontal surface. The slope has major effects on load transfer at the cover depth of 1.0D.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.8-13
• /
• 1992

최근 우리 나라도 자동차의 수요가 급격히 늘어나고 있고, 생산량도 급증하 고 있어 자동차 공업이 산업의 최고의 위치를 확보하게 되었다. 자동차는 최 신 종합 기계 구조물로서 전기, 전자, 제어에 이르기까지 거의 모든 분양의 학문적 이론과 기술을 도입하는 최첨단의 기계 장비인것이다. 따라서 그 부 가가치 또한 매우 큰 것이다. 자동차의 성능을 결정짓는 가장 커다란 요소는 주행 성능과 안정성 및 조종성이다. 주행성능이라 함은 자동차의 종방향 운 동에 관한 성능으로서 기관의 동력에 지배적인 영향을 받는 성능(동력 성능) 과 그 밖의 성능(타향 성능, 제동 성능)으로 구분된다. 또 안정성과 조종성이 라함은 자동차의 횡방향 운동에 관한 성능으로서 로울링과 요우잉을 포함시 킨 곡선 운동에 관한 성능을 일컫는다. 이러한 운동 성능을 좌우하는 것은 구조적인 설계의 양부와 스프링이나 댐퍼의 성능일 것이다. 자동차의 수많은 부품 중의 다수가 국산화 되어 있지 아니하고, 또한 이러한 부품들의 성능을 시험할 수 있는 장비의 수입 의존도가 높은 것은 업계나 학계 등에서 앞으 로 많은 연구가 이루어져야 할 점이다. 자동차의 충격 흡수기(shock absorber)의 검사기도 또한 수입 시험기에 의존하고 있었던 것이 현실이었 다. 이에 본 연구진은 이 검사기의 국산화에 착수 한 것이다. 자동차에 있어 서 충격 흡수기는 지면에서 오는 충격을 급속히 흡수하는 역할을 하여 자동 차의 주행 성능과 안정성을 높혀 주며, 승차감을 높혀 주는 중요한 부품이 다. 따라서 충격 흡수기의 양부의 판정은 대단히 중요한 것이다. 본 연구에 서는 충격 흡수기의 충격 흡수력(감쇠력)을 측정하여 감쇠 특성을 정도 높게 파악할 수 있는 시험기를 만드는데 그 목적을 두고 있다. 연구는 시험기의 구동부를 제작하는 기계부와, 제어 및 계측의 하드웨어를 담당하는 전기.전 자부및 실제로 기계를 구동, 제어하고 측정 결과를 기록하고 출력하는 부분 을 담당하는 소프트웨어 개발부로 나누어서 진행하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.5
• /
• pp.393-400
• /
• 2017

A virtual simulation test program to carry out the handling qualities of unmanned Rotorcraft has developed by using the MATLAB GUIDE(Graphic User Interface Development Environment). The handling quality evaluation program based on ADS-33E contributes to design the flight control system and to evaluate handling qualities. In addition, Linear Quadratic Tracker with Integrator(LQTI) attitude controller based on Linear Quadratic Regulator(LQR) for to rotorcraft BO-105C and the effects of the handling qualities is analyzed change to weight matrices of the Q and R.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.69-77
• /
• 2002

To acquire the dynamic response and design the controller of the airship, the longitudinal motion of the airship with respect to the vertical gust, which is the nonlinear system, was studied. The effects of the apparent mass and moment of the airship delay the dynamic response and the settling time, which are slower than those of conventional airplanes. The current object of the airship is designed to cruise at 500~1000m altitude. At that height, the atmospheric conditions are generally unstable by wind gust. In this paper, it has been studied for the case of vertical gust, since the apparent mass effects are dominant in has been studied for the case of vertical gust, since the apparent mass effects are dominant in that plane. In addition to the study of the dynamic responses of the airship, the controller was designed using the PID-controller. When the gust was applied, airship responses were recovered of equilibrium states. However, it takes too ling time for recovery and the speed of airship is reduced. So, the aim in this paper was to fasten the recovery speed and to get back the cruising velocity. The control parameters were determined from the stability mode analysis, and the control inputs were the thrust and the elevator deflection angle.