• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.298-301
• /
• 2009

최근 들어 무선 멀티미디어 서비스를 위한 Wireless Sensor Network 에 관한 연구가 활발히 진행됨에 따라 그 응용의 한 부분으로써 이미지 센서를 이용하여 이미지 데이터를 전송하는 WISN(Wireless Image Sensor Networks) 에 관한 연구가 시작되었다. WISN은 센서노드의 제한된 자원(배터리, 대역폭, 처리속도, 메모리 크기)으로 인해 많은 어려움을 갖는다. 특히 그 중에서 제한된 배터리로 인해 이미지 센서노드는 효율적인 에너지 관리가 필요하다. 이미지 센서노드의 에너지 소모는 이미지 캡쳐 과정, 이미지 데이터의 처리 및 가공(compression)과정, 이미지 데이터의 전송 과정에서 발생한다. 또한 수 Kbyte 이미지 데이터는 기존의 무선센서 네트워크의 데이터보다 훨씬 크기 때문에 빈번한 이미지 데이터의 전송은 노드의 수명을 단축시켜 전체 네트워크의 분단을 초래한다. 본 논문에서는 이러한 문제점을 해결하기 위해 JPEG 이미지 크기의 변화량을 고려하여 전송 횟 수를 최소화하는 기법을 제안한다. 종단 센서노드는 자신이 이전 JPEG이미지와 현재 JPEG이미지의 크기를 비교하여 특정 임계값 이하이면 전송하지 않고, 임계값 이상일 때에는 변화된 특정 부분의 이미지만을 보냄으로써 데이터량을 줄이게 된다. 결과적으로 효율적 에너지 관리를 통해 센서 노드의 라이프타임을 향상 시키는 결과를 가진다. 제안된 기법을 검증하기 위하여 테스트 보드를 만들어 제안된 기법과 일반적인 방법에서의 데이터의 전송 횟수 및 에너지 소모량과 노드의 라이프타임을 비교하여 제안된 기법의 성능의 우수함을 보였다.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1046-1053
• /
• 2019

In a multi-channel single-ended system, the far-end crosstalk (FEXT) due to mutual inductance and mutual capacitance between two adjacent channels critically limit the bandwidth. FEXT causes crosstalk-induced jitter (CIJ) and crosstalk-induced glitch (CIG) which leads to timing margin and voltage margin degradations, respectively. Therefore, FEXT must be compensated in order to increase eye opening and achieve high data-rate. It can be compensated in transmitter by controlling the timing of the data or reshaping the waveform of the signal. Also, FEXT can be compensated in receiver by generating mimicked FEXT using high-pass filter. In this paper, recent techniques to compensate FEXT are investigated, with discussions of their pros and cons.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.2
• /
• pp.23-30
• /
• 2010

This paper presents implementation details of car communications system based on V2I2V model over broadband wireless networks including WCDMA, HSDPA and WiBro. Also, we measures the major performance metrics such as Round Trip Time, end-to-end latency and others between in-vehicle client and location management system by driving across urban areas in Daegu city. Analysis of experimental results would be helpful to consider the applicability of traffic safety services using V2I2V-based car communications over various broadband wireless networks.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.727-736
• /
• 2021

Road tunnel lengths are increasing. Some 1,300 tunnels with 1,102 km in length had been increased till 2019 from 2010. There are 64 tunnels over 3,000 m in length, with their total length adding up to 276.7 km. Safety facilities in the event of a tunnel fire are critical so as to prevent large-scale casualties. Standards for installing disaster prevention facilities are being proposed based on the guidelines of the Ministry of Land, Infrastructure and Transport, but they may be limited to deep underground tunnels. This study was undertaken to provide guidelines for the spacing of evacuation connection passages and the widths of evacuation connection doors. Evacuation with various spacing and widths was simulated in regards to evacuation time, which is the measure of safety, using the evacuation analysis simulation software EXODUS Ver.6.3 and the fire/smoke analysis software SMARTFIRE Ver.4.1. Evacuation connection gates with widths of 0.9 m and 1.2 m, and spacings of 150 m to 250 m, were set to every 20 m. In addition, longitudinal slopes of 6 % and 0 % were considered. It was determined to be safe when the evacuation completion time was shorter than the delay diffusion time. According to the simulation results, all occupants could complete evacuation before smoke spread regardless of the width of the evacuation connection door when the longitudinal slope was 6 % and the interval of evacuation connection passage was 150 m. When the evacuation connection passage spacing was 200 m and the evacuation connection gate width was 1.2 m, all occupants could evacuate when the longitudinal slope was 0 %. Due to difference in evacuation speed according to the longitudinal slope, the evacuation time with a 6 % slope was 114 seconds shorter (with the 190 m connection passage) than with a 0 % slope. A shorter spacing of evacuation connection passages may reduce the evacuation time, but this is difficult to implement in practice because of economic and structural limitations. If the width of the evacuation junction is 1.2 m, occupants could evacuate faster than with a 0.9 m width. When the width of a connection door is 1.2 m with appropriate connection passage spacing, it might provide a means to increase economic efficiency and resolve structural limitations while securing evacuation safety.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.187-197
• /
• 2008

While driving a highway, A driver gets lots of information through geometrical structure, traffic situation, signs on the road. He gets most of the information by visual sense. Acceleration or deceleration and driving direction depend on sight distance. Therefore, it's essential to secure a driver's sight distance for a safe drive. However, design guides of geometrical structure and sight distance suggest respective standards of horizontal and vertical alignment. They do not indicate quantitative standard of combined alignment. Currently, element separated on a two-dimensional projected plane are available, but they do not guarantee safe and pleasant design. I will use the existent model analysing three-dimensional sight distance through mathematical calculation and sort a variety of geometrical structure element and type. In these researches, we will look at how much three-dimensional sight distance is overestimated or underestimated compared to two-dimensional. I will develop a program which predicts traffic velocity on the curvature of two-lane provincial road. stopped sight distance and three-dimensional sight distance will be compared at a predicted drive velocity. I will suggest the way to evaluate road consistency.

• Journal of the Korean Geographical Society
• /
• v.42 no.3 s.120
• /
• pp.388-404
• /
• 2007

This study interprets evolution of fluvial terraces along the four Yeongdong- and Yeongseo streams such as Naerin River, Yeongok River, Golji River and Osip River, in Gangwon Province based on the tectonics. The results from the analyses of the distribution pattern of fluvial terraces and incision rates of rivers show distinctively the evidence as the axis of uplift by Taebaek Mountains, especially on the 4th, 5th and 6th terraces in upper reach of Osip River among the four streams. The axis of uplift extends to the zone of $30\sim40km$ in width as well as the divide. The difference of uplift between upper and middle reaches of Naerin River and total reach of Golji River wasn't found from the height from riverbed by the active uplifting along all reaches, estimated to be set in inner area of uplift zone. Incision rate of period between formation age of 2nd terrace and 1st terrace is calculated $0.13\sim0.22m/ka$, and incision rate of period between formation age of 1st terrace and Present is diversely calculated $0.17\sim0.27m/ka$ by the climatic discrepancy between the two periods. The incision rate of Yeongdong streams whose mouths reach to the sea level eroded actively more than Yeongseo streams in the uplift zone. And Yeongdong streams between formation age of 1th terrace and present appears to much higher than that of Yeongseo streams, due to active down-cutting in oder to balance against the sea level.

• 한국노년학
• /
• v.29 no.4
• /
• pp.1611-1628
• /
• 2009

It is well known that health and psychosocial factors are closely associated with depressive symptoms. Due to limitations in available data and analysis methods, however, little is known about the effects of health and psychosocial factors on depression trajectory. In order to address the limitations, this study examines the predictors of depression trajectory using latent growth curve modeling involving individuals aged 60 and over who participated in the Korean Welfare Panel Study (N=4,919). Controlling for socioeconomic variables, health and psychosocial variables were cross-sectionally associated with depressive symptoms, which is consistent with previous findings. However, the effects of health and psychosocial variables on the rate of depressive symptom change varied. Health variables were significantly associated with the levels of depressive symptoms at wave 1, but these were not significantly associated with the rate of depressive symptoms change. By contrast, although psychosocial variables were significantly associated with depressive symptoms at wave 1, the effects of psychosocial variables on the rate of depressive symptom change varied. Specifically, while self-esteem and family relationship were positively associated with the rate of depressive symptom change, social relationship was negatively associated with the rate of depressive symptom change. Based on the findings, this study discussed implications for intervention and future research.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.11
• /
• pp.1373-1381
• /
• 1999

이 논문에서는 통신망 설계 응용분야의 문제를 그래프 이론 문제로써 고려해 보았다. 개별 기업체가 서로 떨어진 두 곳을 연결하고자 할 때 공용통신망의 회선을 빌려 통신망을 구축하게 되는데 많은 경우 여러 종류의 회선들이 공급됨으로 어떤 회선을 선택하느냐의 문제가 생긴다. 일반적으로 빠른 회선(low delay)은 느린 회선(high delay)에 비해 비싸다. 그러나 서비스의 질(Quality of Service)이라는 요구사항이 종종 종단지연(end-to-end delay)시간에 의해 결정되므로, 무조건 낮은 가격의 회선만을 사용할 수는 없다. 결국 개별 기업체의 통신망을 위한 통로를 공용 통신망 위에 덮어씌워(overlaying) 구축하는 것의 여부는 두 개의 상반된 인자인 가격과 속도의 조절에 달려 있다. 따라서 일반적인 최소경로 찾기의 변형이라 할 수 있는 다음의 문제가 본 논문의 관심사이다. 두 개의 지점을 연결하는데 종단지연시간의 한계를 만족하면서 최소경비를 갖는 경로에 대한 해결을 위하여, 그래프 채색(coloring) 문제와 최단경로문제를 함께 포함하는 그래프 이론의 문제로 정형화시켜 살펴본다. 배낭문제로의 변환을 통해 이 문제는 {{{{NP-complete임을 증명하였고 {{{{O($\mid$E$\mid$D_0 )시간에 최적값을 주는 의사선형 알고리즘과O($\mid$E$\mid$)시간의 근사 알고리즘을 보였다. 특별한 경우에 대한 {{{{O($\mid$V$\mid$ + $\mid$E$\mid$)시간과 {{{{O($\mid$E$\mid$^2 + $\mid$E$\mid$$\mid$V$\mid$log$\mid$V$\mid$)시간 알고리즘을 보였으며 배낭 문제의 해결책과 유사한 그리디 휴리스틱(greedy heuristic) 알고리즘이 그물 구조(mesh) 그래프 상에서 좋은 결과를 보여주고 있음을 실험을 통해 확인해 보았다.Abstract This paper considers a graph-theoretic problem motivated by a telecommunication network optimization. When a private organization wishes to connect two sites by leasing physical lines from a public telecommunications network, it is often the cases that several categories of lines are available, at different costs. Typically a faster (low delay) lines costs more than a slower (high delay) line. However, low cost lines cannot be used exclusively because the Quality of Service (QoS) requirements often impose a bound on the end-to-end delay. Therefore, overlaying a path on the public network involves two diametrically opposing factors: cost and delay. The following variation of the standard shortest path problem is thus of interest: the shortest route between the two sites that meets a given bound on the end-to-end delay. For this problem we formulate a graph-theoretical problem that has both a shortest path component as well as coloring component. Interestingly, the problem could be formulated as a knapsack problem. We have shown that the general problem is NP-complete. The optimal polynomial-time algorithms for some special cases and one heuristic algorithm for the general problem are described.

• Journal of the Korean Vacuum Society
• /
• v.5 no.4
• /
• pp.269-277
• /
• 1996

The vacuum systems of PLS linac provides average pressure of $2.6\times 10^{-6}$Pa under high power microwave of 54 MW peak with 4.1 $\mu \textrm s$ pulse width and 10 Hz repetition rates. The base pressure of system is$2.4\times 10^{-6}$Pa with 45$^{\circ}C$ cooling water. The outgassing rate of the system is decreased from $3.0\times 10^{-11}Torr-l/sec-\textrm{cm}^2$ at the initial stage after installation to $1\times 10^{-12}Torr-l/sec-\textrm{cm}^2$ at present. Total accumulated microwave energy dose is about 140 GJ per module. All ion pumps are working under saturated regime and effective pumping speeds of 60 I/s, 230 I/s ion pumps are 45 I/s, 65 I/s, 140 I/s under the operating range. Main problems occurred in recent year are troubles of ion pump controller and vacuum gauge controller, vacuum leak of energy doubler window and electron gun ceramic, and water leak in the dummy load of acceleraing columns. Total of 41 troubles with 140. 8 hours down time give good system availability of 98%. Down time can be reduced by high power waveguide valves and water dummy loads under development, and then availability is expected to be increased up to 99.5%.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.11
• /
• pp.245-253
• /
• 2020

This study is a longitudinal analysis of the life satisfaction of Generation X and Generation Y, with different historical backgrounds, growth backgrounds, values, and lifestyles, using data from the Korean Welfare Panel(KOWEPS). The research data is from the KOWEPS 1st year(2006) to 14th year(2019), out of 27,301 people, who conducted life satisfaction from the latest 12th to 14th year, and the responses were properly answered data from 3 years of 2,492 were used. As a result of the study, the higher the life satisfaction of both Generation X and Generation Y, the more the life satisfaction slowly increases at a slower rate as time passes. In addition, in terms of life satisfaction and rate of change, the initial value of life satisfaction was higher as the living satisfaction increased in both Generation X and Generation Y, but in the case of Generation X, the higher living satisfaction, the lower the rate of change in life satisfaction for 3 years by .327, in the case of Generation Y, the rate of change in life satisfaction was not affected. Finally, in the model of this study, a partial mediation of health condition was established between living satisfaction and life satisfaction tendency. Living satisfaction was analyzed to have a direct effect on life satisfaction and at the same time indirectly with a health condition as a parameter.