• Environmental and Resource Economics Review
• /
• v.14 no.2
• /
• pp.519-547
• /
• 2005

The aim of this study is to analysis how economic welfare lost happens within the present korea seasonal and time period electricity pricing system and find out reasonable electricity price system acceptable during the transitional period of korea electricity industry restructuring To analyze economic welfare lost in the electricity industry, in advance seasonal and time periodic 9 demand curves(summer, spring ＆fall, winter/peak-load time, middle-load time, low-load time) and one market supply curve are made and then using these demand and supply curve, seasonal and time periodic market equilibrium prices is calculated. Finally, comparing these market equilibrium prices with present regulated classified seasonal and time periodic prices, the whole economic welfare lost in the electricity industry is calculated. The result of this study shows that in 2002, the total economic welfare lost in electricity industry is 137,770 million Won and under present price system, the worst welfare lost is happening seasonally in spring ＆ fall, time periodically in the middle-load time. Specifically analyzing the characteristics of welfare lost, especially on the industry customers and service customers which are applied in seasonal and time periodic pricing, for the industry customers, the welfare lost calculated in this class occupies 51% of the total welfare lost in the whole electricity industry and the worst welfare lost is happening seasonally in spring ＆ fall, time periodically in the middle-load time. For service customers, the welfare lost calculated in this class occupies 13% of the total welfare lost in the whole electricity industry and the worst welfare lost is happening seasonally in summer, time periodically in the peak time Finally, this study was made based on the year of 2002 and KEPCO has practiced two times of rate change until now. The result of rate change was positively analyzed in the direction of economic welfare improvement(welfare improvement achieved by 16.3% compared to 2002 result).

• Journal of the Korean association of regional geographers
• /
• v.23 no.2
• /
• pp.403-419
• /
• 2017

This study analyzed the forces to drive the change of urban green spaces in Daegu from 1989 to 2009. First, the loss and fragmentation of green spaces in the past 20 years were spatially identified by performing the hot spots analysis for the cell-based spatial metrics quantifying the size and diversity of green spaces. Next, seven drivers such as slope, distance to roads, land price, population density, ratios of residential, commercial, and industrial areas were selected based on the previous studies and the direction of the association between the loss and fragmentation of green spaces and seven drivers was analyzed with the stepwise logistic regression. Finally, the relative importance of the seven drivers and their interactions in the past 20 years were analyzed with the geographical detector. The results show that the loss of green spaces was concentrated on a part of the Anshim housing development district from 1989 to 2009 and green spaces were highly fragmented around the housing development districts such as Seongseo, Anshim, Dalseong-gun and Chilgok. The forces to drive the loss and fragmentation of green spaces in these areas were different at the administrative levels, but the drivers such as slope and ratios of residential and industrial areas were commonly significant. These drivers were positively correlated with largest patch index(LPI) quantifying the loss of green spaces while they were negatively correlated with Shannon's diversity index(SHDI) measuring the fragmentation of green spaces. In other words, the loss and fragmentation of urban green spaces in Daegu appeared around such regions with lower slope and lower ratios of residential and industrial areas. The relative importance of drivers for LPI was listed as ratio of industrial area, land price, and ratio of commercial area in descending order whereas that of drivers for SHDI was listed as ratio of industrial area, land price, and distance to roads in descending order. Also, the interaction between slope and ratio of residential area had a great impact on LPI and SHDI. The ratio of industrial area was a single driver to most significantly explain the loss and fragmentation of urban green spaces in Daegu in the past 20 years. The interaction between slope and ratio of residential area was greater than the independent influence of a single driver. This study will provide the base data to build a sustainable urban green policy for the city of Daegu in the near future.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.3
• /
• pp.312-318
• /
• 2014

We evaluated the morphological characteristics of 156 maize inbred lines, which were developed to breeding normal maize variety at Maize Experiment Station, Gangwon Agricultural Research and Extension Services, by examining 11 quantitative and three qualitative characteristics. On the evaluation of three qualitative traits for 156 maize inbred lines, most inbred lines showed yellow (85 and 84 inbred lines) at tassel color (QL1) and silk color (QL2), and showed semi erect (105 inbred lines) at plant type (QL3). While, the evaluation of 11 quantitative traits for 156 maize inbred lines, they showed the morphological variation in days of tasseling (QN1, 56.5 to 76.0 days), days of silking (QN2, 59.0 to 85.5 days), stem thickness (QN3, 12.7 to 42.9 mm), plant height (QN4, 111.8 to 239.8 cm), ear height (QN5, 48.2 to 126.5 cm), 100 kernel weight (QN6, 14.9 to 36.4 g), ear length (QN7, 10.0 to 79.0 cm), setted kernel length (QN8, 8.0 to 70.5 cm), ear thickness (QN9, 4.0 to 22.0 cm), total kernel weight (QN10, 22.0 to 490.0 kg) and water content (QN11, 9.3 to 11.9%), respectively. As a result, 11 inbred lines (00hf3, 00hf19, 00hf30, 00hf36, 02S8069, 02S8072, 02S8090, 02S8099, 05S10011, 06S8085-6, 07S8011) in the 156 normal maize inbred lines have showed comparatively high values. While, the results of PCA (principal component analysis) indicated that the ear length (QN7), setted kernel length (QN8), ear thickness (QN9) and total kernel weight (QN10) greatly contributed in positive direction on the first principal components. And also, days of tasseling (QN1), days of silking (QN2), plant height (QN4) and ear height (QN5) contributed in negative direction on the second principal component. Thus these morphological characters, which were greatly contributed in the first and second principal components, might be considered to be useful for discrimination among 156 normal inbred lines. Specifically, this study's assessment of morphological characteristics of 156 normal inbred lines will be helpful useful for normal maize breeding programs such activities as planning crosses for hybrid and line development at Maize Experiment Station, Gangwon Agricultural Research and Extension Services.

• Economic and Environmental Geology
• /
• v.37 no.5
• /
• pp.477-497
• /
• 2004

In the Hongseong and Kwangcheon areas, two ultramafic rocks are exposed as isolated bodies in the Precambrian Kyeonggi gneiss complex. The ultramafic rocks extend for several hundred meters to NNE direction and are contact with adjacent metasediments by steeply dipping faults. The rocks are dunite or harzburgite showing dominantly equigranular-mosaic and protogranular textures with a minor amount of porphyroclastic textures. They contain varying amounts of fosteritic olivine (F$o_{0.91-0.93}$), magnesian pyroxene (E$n_{0.89-0.93}$) and tremolitic to magnesian hornblende with minor amounts of spinel, serpentine, chlorite, magnetite, phlogopite and talc. The rocks are in contrast with adjacent gneiss complex or metabasite (amphibole, biotite, plagioclase, alkali-feldspar and quartz). Geochemically, these ultramafic rocks are characterized by high magnesium number (M$g_#$> 0.88) and transitional element (mainly, Ni>1716 ppm, Cr>1789 ppm), low alkali element (e.g. $K_2$O<0.09 wt.%, Na$_2$O<0.19 wt.%) and depletion of incompatible elements. The calculated correlation coefficients showed good positive correlations among the ferrous (e.g. Sc, V, Zn) elements, incompatible elements (e.g. REE), and among SiO$_2$ or $Al_2$O$_3$ with ferrous elements, whereas negative correlations are appeared between Ni and major elements. These results involve increasing of the ferrous- and $Al_2$O$_3$-bearing minerals(e.g. amphibole and mica) with decreasing of Mg-bearing minerals (e.g. olivine) depending on the degree of alteration. Calculated geothermometries and mineral assemblages suggest that the ultramafic rocks have been metamorphosed through the condition from the greenschist to amphibolite facies. Compared with ultramafic rocks elsewhere, it is thought that those of the Hongseong and Kwangcheon areas are derivatives of the depleted sources since they are depleted in incompatible elements including REE abundances. Moreover overall characteristics of the ultramafic rocks are similar to the those of orogenic related Alpine type ultramafic rocks, especially, shallow mantle slab varieties.

• Economic and Environmental Geology
• /
• v.12 no.2
• /
• pp.51-73
• /
• 1979

The zinc-lead deposits at the Yeonhwa I mine were investigated in terms of ore-forming geologic setting, structural style of ore control, geometry of individual orebodies, zoning, paragenesis and chemical composition of skarn minerals, as well as metal grades and ratios of selected orebodies. The Yeonhwa I mine is characterized by a large swarm of chimney type massive orebodies with thin skarn envelopes, boldly developed through a thick sequence of Pungchon Limestone, the overlying Hwajeol Formation, and the underlying Myobong Slate of Cambrian age. Nearly 20 orebodies of similar shape, but of varying size are arranged in a V-shaped pattern with northwest and northeast trends, clearly indicating an outstanding ore control by a conjugate system of fractures with these trends. Important orebodies are the Wolam 1, 2, 3, and 5 orebodies in the west, and the Namsan 1, 2, 3. and 5 orebodies in the east, among others. The Wolam 1 orebody, which was observed from the -360 level through the -240, -120, and 0 levels to the surface outcrops (totaling a vertical height of about 500m), shows a vertical variation in skarn mineralogy, ranging from pyroxene-garnet zone on the lower levels. through pyroxene (without garnet) zone on the intermediate levels, and finally to rhodochrosite vein on the upper levels and surface. Microprobe analyses of pyroxene and garnet on a total of 14 mineral grains revealed that pyroxenes are manganoan salitic in most samples, with downward increase of Fe and Mn, whereas garnets are highly andraditic, containing fractions of subordinate grossular with downward decrease of Fe. This indicates a reverse relationship of Fe-contents between pyroxene and garnet with depth. Ore minerals are major sphalerite, subordinate galena, and minor chalcopyrite. Sulfide gangue minerals include major pyrrhotite, and minor pyrite and marcasite of later age. Two types of variational trends in metal grades and ratios with depth are present on the plots of assay data from the Wolam orebodies: one is a steady upward increase in Pb, Zn, and Pb:Zn ratios, with a terminal decline at the top of orebody: the other is an irregular or sinusoidal change. The former is characteristic of chimney-type orebodies, whereas the latter is of vein· shaped orebodies. The Pb grades show large variations among orebodies and from level to level, whereas the Zn grades are relatively constand or less variable.

• Journal of Animal Science and Technology
• /
• v.53 no.1
• /
• pp.1-6
• /
• 2011

This simulation study was performed to investigate the accuracy of the estimated breeding value by using genomic information (GEBV) by way of Bayesian framework. Genomic information by way of single nucleotide polymorphism (SNP) from a chromosome with length of 100cM were simulated with different marker distance (0.1cM, 0.5cM), heritabilities (0.1, 0.5) and half sibs families (20 heads, 4 heads). For generating the simulated population in which animals were inferred to genomic polymorphism, we assumed that the number of quantitative trait loci (QTL) were equal with the number of no effect markers. The positions of markers and QTLs were located with even and scatter distances, respectively. The accuracies of estimated breeding values by way of indicating correlations between true and estimated breeding values were compared on several cases of marker distances, heritabilities and family sizes. The accuracies of breeding values on animals only having genomic information were 0.87 and 0.81 in marker distances of 0.1cM and 0.5cM, respectively. These accuracies were shown to be influenced by heritabilities (0.87 at $h^2$ =0.10, 0.94 at $h^2$ =0.50). According to half sibs' family size, these accuracies were 0.87 and 0.84 in family size of 20 and 4, respectively. As half sibs family size is high, accuracy of breeding appeared high. Based on the results of this study it is concluded that the amount of marker information, heritability and family size would influence the accuracy of the estimated breeding values in genomic selection methodology for animal breeding.

• Journal of Animal Science and Technology
• /
• v.51 no.5
• /
• pp.345-352
• /
• 2009

This study utilized 332,625 records of linear type scores consisting for 15 primary traits, 22,175 final score and 84,612 pedigree information of 22,175 Holstein cows from 1993 to 2007 in Korea to estimate genetic parameters for 16 type traits. Genetic and error (co)variances between two traits selected from 16 traits were estimated using bi-trait pairwise analyses with DFREML package. The estimated heritabilities for stature (ST), strength (STR), body depth (BD), dairy form (DF), rump angle (RA), thurl width (TW), rear legs side view (RLSV), foot angle (FA), fore udder attachment (FUA), rear udder height (RUH), rear udder width (RUW), udder cleft (UC), udder depth (UD), front teat placement (FTP), front teat length (FTL) and final score (FS) were 0.31, 0.21, 0.25, 0.10, 0.29, 0.19, 0.09, 0.06, 0.12, 0.13, 0.12, 0.08, 0.26, 0.20, 0.28 and 0.15, respectively. ST had the highest positive genetic correlation with BD (0.90), while RLSV had the highest negative genetic correlation with FA (-0.56). RA had negative genetic correlation with most udder traits (-0.17~-0.02). Especially, RUW had the higher positive genetic correlation with STR (0.60), BD (0.62), and TW (0.49), however, UD had the higher negative genetic correlation with STR (-0.40) and BD (-0.40). FTL had negative genetic correlation with FUA, RUH, RUW, UC and UD. FS had positive genetic correlation with UC, UD and FTP (0.12, 0.18 and 0.20). However, additional research is needed on the use of these parameters in the genetic evaluation because estimated genetic and error variance-covariance matrices were not positive definite.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.2
• /
• pp.41-50
• /
• 2013

We investigated influence of continuous application of gypsum(G:$CaSO_4{\cdot}2H_2O$), popped rice hulls(H) and zeolite(Z) on soil aggregation of reclaimed silt loam soils. The application rates amended to silt loam from reclaimed soils at Saemangeum of Mangyeong were varied as follows; 1550(G1), 3100(G2), 6200 (G3) gypsum kg/10a, 1000(H1), 2000(H2), 3000(H3) popped rice hulls kg/10a, and 200(HZ1), 400(HZ2), 800(HZ3) zeolite kg/10a added to 1500 popped rice hulls kg/10a, respectively. In addition, the bermuda grass was growing, and the soil aggregates were analyzed for 60, 90 and 120 days after treatments(DAT). At 60 DAT, the effect of treatment was in order of G>H${\geq}HZ$, and the 1550kg/10a(G1) was the highest as 52.48%. At 90 DAT, the effect of treatment was also in order of G>H>HZ. Those was 3.78-3.12, 2.03-3.03 and 1.79-2.57 times in compared with the control, respectively. At 120 DAT, the effect of treatment was similar continued in order of G>H>HZ. Those was 3.00-2.20, 1.06-1.64 and 0.92-1.23 times in compared with the control, respectively. In conclusion, we found that the continuous application for two year of gypsum, popped rice hulls and zeolite was excellent above the 1 year, and the effect of the treatment for soil amendments of reclaimed silt loam soil was excellent in order of G>H>HZ.

• Radiation Oncology Journal
• /
• v.11 no.1
• /
• pp.69-77
• /
• 1993

Treatment of cerebellar medulloblastoma has been much improved with modern surgical technique for gross total tumor removal and adequate radiation therapy for the whole craniospinal axis. Questions have been arosen about the optimal radiation dose for the preventive treatment of whole cranium and whole spinal axis. Recently, many authors have reported their treatment results as comparable to older data, using lower than conventional dose of 3,600 cGy-4,000 cGy. For 50 patients treated between 1981 and 1990 at the Department of Radiation Therapy of SNUH, retrospective analysis was done for the treatment result, especially the neuraxis control, by radiation dose for the presymptomatic area of the disease. Analysis only by total spinal dose did not give any significant difference. But further analysis by following patient group; 3,600 cGy/150 cGy (n=6), 3,000 cGy/150 cGy (n=10), 2,400 cGy/150 cGy (n=17) and 2,400 cGy/100-120 cGy (n=11) showed significant improvement of neuraxis control by decreasing order (p =0.003). There was no significant difference in overall survival between the groups. For the 19 patients who had been confirmed initially as having no neuraxis disease, TDF 30 was the cur-off value that could prevent neuraxis failure (p =0.004). We couldn't define any TDF value that give reasonable control for the patient group with positive CSF study at initial diagnosis.

• Radiation Oncology Journal
• /
• v.18 no.2
• /
• pp.150-156
• /
• 2000

Purpose : Stereotactic radiation therapy (SRT) can deliver highly focused radiation to a small and spherical target lesion with very high degree of mechanical accuracy. For non-spherical and large lesions, however, inclusion of the neighboring normal structures within the high dose radiation volume is inevitable in SRT This is to report the beam shaping using the partial closure of the independent jaw in SRT and the verification of dose calculation and the dose display using a home-made soft ware. Materials and Methods : Authors adopted the idea to partially close one or more independent collimator jaw(5) in addition to the circular collimator cones to shield the neighboring normal structures while keeping the target lesion within the radiation beam field at all angles along the arc trajectory. The output factors (OF's) and the tissue-maximum ratios (TMR's) were measured using the micro ion chamber in the water phantom dosimetry system, and were compared with the theoretical calculations. A film dosimetry procedure was peformed to obtain the depth dose profiles at 5 cm, and they were also compared with the theoretical calculations, where the radiation dose would depend on the actual area of irradiation. Authors incorporated this algorithm into the home-made SRT software for the isodose calculation and display, and was tried on an example case with single brain metastasis. The dose-volume histograms (DVH's) of the planning target volume (PTV) and the normal brain derived by the control plan were reciprocally compared with those derived by the plan using the same arc arrangement plus the independent collimator jaw closure. Results : When using 5.0 cm diameter collimator, the measurements of the OF's and the TMR's with one independent jaw set at 30 mm (unblocked), 15.5 mm, 8.6 mm, and 0 mm from th central beam axis showed good correlation to the theoretical calculation within 0.5% and 0.3% error range. The dose profiles at 5 cm depth obtained by the film dosimetry also showed very good correlation to the theoretical calculations. The isodose profiles obtained on the home-made software demonstrated a slightly more conformal dose distribution around the target lesion by using the independent jaw closure, where the DVH's of the PTV were almost equivalent on the two plans, while the DVH's for the normal brain showed that less volume of the normal brain receiving high radiation dose by using this modification than the control plan employing the circular collimator cone only. Conclusions : With the beam shaping modification using the independent jaw closure, authors have realized wider clinical application of SRT with more conformal dose planning. Authors believe that SRT, with beam shaping ideas and efforts, should no longer be limited to the small spherical lesions, but be more widely applied to rather irregularly shaped tumors in the intracranial and the head and neck regions.