• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.116-126
• /
• 2013

Glycol ethers are a group of solvents based on alkyl ethers of ethylene glycol commonly used in paints. These solvents typically have a higher boiling point, together with the favorable solvent properties of lower-molecular weight ethers and alcohols. The word "Glycol ethers" was registered as a United States trademark by Union Carbide Corp. Typically, glycol ethers are found in pharmaceuticals, sunscreens, cosmetics, inks, dyes and water based paints. On the other hand, glycol ethers are used in degreasers, cleaners, aerosol paints and adhesives. Most glycol ethers are relatively water soluble, biodegradable and only a few are considered toxic. Therefore, they are unlikely to pose an adverse risk to the environment. Recent study suggests that occupational exposure to glycol ethers is related to low motile sperm count in men, but the finding has been disputed by others. In this study, skin permeation of 3 types glycol ethers were studied in vitro using matrix such as solvent and detergent. The absorption of glycol ethers[methyl glycol ethers(MC), ethyl glycol ethers(EC) and butyl glycol ethers(BC)] has been measured in vitro through rat skin. Epidermal membranes were set up in Franz diffusion cells and their permeability to PBS measured to establish the integrity of the skin before the glycol ethers were applied to the epidermal surface. Absorption rates for each glycol ethers were determined and permeability assessment made to quantify any irreversible alterations in barrier function due to contact with the esters. Types of glycol ethers in vitro experimental results on MC> EC> BC quickly appeared in the following order: skin permeation was beneficial to the skin permeation small molecular weight, the difference in chemical structure, such as hydrophilic, because with the partition coefficient and solubility mechanisms and passive diffusion to increase the speed at which transmission is considered.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.4
• /
• pp.72-81
• /
• 2013

The objective of this study was to verify whether SCB(Slurry Composting & Bio-filtration) system can be applied for the treatment of anaerobic digestion(AD) wastewater and also, to identify the most effective set among three filtration compost beds tested. Results can be summarized as these; (a) When AD wastewater was sprayed on the top of beds which were mainly composed of sawdust and/or other media and, subsequently, filtrates collected and analyzed, there were large drop in the values of Electric Conductivity(EC), Total Suspended Solid(TSS), Biochemical Oxygen Demand(BOD), and Chemical Oxygen Demand(COD). In contrast, Total Nitrgen(T-N) and Total Phosphorus(T-P) were progressively elevated. We consider these changes as positive if the filtrate are to be utilized as liquid fertilizer. (b) When three sets of filtration beds (T1, T2, T3) were compared for their effectiveness, no significant difference was found among them. These indicate that expensive sawdust can be replaced in part with cheaper media such as woodchip, rice husks, or others. (c) At early stage of operation (within 20 days), BOD in filtrates were maintained at high level probably due to the lack of microbial activity. During the same stage, T-N, T-P was at low level but, were elevated to higher levels thereafter. These data, when combined, indicate that the filtration system needs at least a couple of weeks for the optimized microbial functioning. (d) The temperatures of the experimental beds were progressively dropped as the experiment continued through the fall season, although filtration effectiveness was not noticeably influenced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.136-152
• /
• 2017

The thermodynamic models, PC-SAFT (Perturbed-Chain Statistical Associated Fluid Theory) state equation and the Two-model approach liquid activity coefficient model NRTL (Non Random Two Liquid) + Henry + Peng-Robinson, for modeling the Rectisol process using methanol aqueous solution as the $CO_2$ removal solvent were compared. In addition, to determine the new binary interaction parameters of the PC-SAFT state equations and the Henry's constant of the two-model approach, absorption equilibrium experiments between carbon dioxide and methanol at 273.25K and 262.35K were carried out and regression analysis was performed. The accuracy of the newly determined parameters was verified through the regression results of the experimental data. These model equations and validated parameters were used to model the carbon dioxide removal process. In the case of using the two-model approach, the methanol solvent flow rate required to remove 99.00% of $CO_2$ was estimated to be approximately 43.72% higher, the cooling water consumption in the distillation tower was 39.22% higher, and the steam consumption was 43.09% higher than that using PC-SAFT EOS. In conclusion, the Rectisol process operating under high pressure was designed to be larger than that using the PC-SAFT state equation when modeled using the liquid activity coefficient model equation with Henry's relation. For this reason, if the quantity of low-solubility gas components dissolved in a liquid at a constant temperature is proportional to the partial pressure of the gas phase, the carbon dioxide with high solubility in methanol does not predict the absorption characteristics between methanol and carbon dioxide.

• Journal of Nutrition and Health
• /
• v.47 no.6
• /
• pp.443-451
• /
• 2014

Purpose: This study was conducted for analysis of menu pattern and food diversity of snack menus of child care centers in order to provide preliminary data for establishment of related guidelines for snack menus for child care centers. Methods: Data from 630 snack menus (350 for morning snacks and 280 for afternoon snacks) of March, 2013 from 14 Child Care Information Centers in Seoul provided for child care centers were analyzed. In addition, the menu pattern and food diversity of morning snack menus were compared with those of afternoon snack menus. Results: Differences in menu pattern and food diversity were observed between morning and afternoon snack menus. The majority of snack menus (66.8%) included two menu items and the numbers of menu items of afternoon snack menus were significantly larger than those of morning snack menus. The percentages of "Grains (G)" and "Grains (G) + Milk (D)" patterns were higher in snack menu (G: 18.9%, G+D: 17.1%). Approximately one third of snack menus were composed of only one food group. In addition, 45.6 % of all snack menus comprised milk and only 23.0% included fruits. Conclusion: These results demonstrated the need for improvement in food composition and diversity of snack menus provided by Child Care Information Centers for child care centers. Therefore, to ensure children's intake of nutritionally balanced snacks, it will be necessary to establish more detailed guidelines for the menu pattern and food composition in snack menus for child care centers.

• Journal of Korean Society of Forest Science
• /
• v.87 no.3
• /
• pp.429-444
• /
• 1998

Objective of this study was to select ectomycorrhizal fungi for black spruce(Picea mariana) inoculation to overcome the growth inhibitory effects of Kalmia angustifolia. Nineteen isolates representing 11 species of ectomycorrhizal fungi were tested for their abilities to grow and form mycorrhizae with black spruce seedlings in the presence of water leachate of leaves of Kalmia. Mycelium growth of 9 isolates were inhibited by the leaf leachate. Colony diameter and biomass of the other 10 isolates were either increased or unaffected under the same conditions. Acidic pH of the culture medium(pH 3 and 4) inhibited some of the fungi, but a combination of acidic pH and the leaf leachate was more inhibitory. Thirteen isolates were able to form ectomycorrhizae with black spruce in presence of 25% leaf leachate in pure culture. Four isolates, Paxillus involutus(NF4), Cenococcum geophilum(GB12), Laccaria laccata(GB23), and E-strain(GB45) formed mycorrhizae more successfully than the others in presence of up to 50% Kalmia leaf leachate. Black spruce seedlings pre-inoculated with these fungi were grown with Kalmia leaf leachate and live Kalmia plants during a four month greenhouse experiment. Abundant mycorrhizae(77-91% of root tips) were developed on seedlings pre-inoculated with P. involutus, L. laccata and E-strain but relatively poor mycorrhization(32% of root tips) resulted with C. geophidum. Over 90% of the short root mycorrhizae were attributed to the inoculated fungi although indigenous mycorrhizae also occurred on most seedlings. Persistence of the mycorrhizae was not affected by living Kalmia plants. Over 80% of the mycorrhizae on seedlings inoculated with P. involutus, L. laccata and E-strain and 53% of the mycorrhizae on seedlings inoculated with C. geophilum were attributable to the inoculant fungi. Control seedlings formed about 45% ectomycorrhizal short roots with indigenous fungi. The L. laccata and C. geophilum inoculated seedlings exhibited enhanced mycorrhizae formation in presence of Kalmia leaf leachate. Mycorrhizae formation with inoculant fungi was 4-15% lower at pH 4 than at pH 5, with the greatest inhibition occurring for L. laccata. Seedlings inoculated with P. involutus had the greatest shoot and root growth followed by L. laccata and E-strain inoculated seedlings. The P. involutus and L. laccata inoculated seedlings were significantly taller with more shoot dry biomass than the uninoculated(control) seedlings. E-strain inoculated seedlings had significantly higher shoot dry biomass and significantly lower number of first order lateral roots compared to the control but other growth parameters such as height, root dry weight and number of short root tips were not significantly different from the control. Seedlings inoculated with C. geophilum were not significantly different from the uninoculated seedlings in any of the growth parameters except for the number of first artier lateral roots which was significantly less than the control seedlings.

• Journal of Korean Society of Forest Science
• /
• v.84 no.3
• /
• pp.277-285
• /
• 1995

This study was conducted to understand the relationship between climatic factors and matsutake(Tricholoma matsutake) mushroom production. Data on local annual matsutake production collected from 29 locations from 1984 to 1993 were analyzed for stepwise and multiple regression with local climatic data, such as monthly maximum, minimum, and average air temperature, soil temperature, relative humidity, amount of rainfall, and number of rainy days. Correlation between monthly climatic factors and annual matsutake production was calculated in each location(Case 1), each year(Case 2), and each month(Case 3). In Case 1, number of rainy days and minimum temperature in Sep. showed positive correlation with matsutake production. In Case 2, maximum, minimum, and average temperature in June showed negative correlation with matsutake production. In Case 3, amount of precipitation in Sep. and Oct. number of rainy days in Sep., and minimum temperature in Sep. and Oct. showed positive correlation with matsutake production. In conclusion, amount of rainfall and number of rainy days in Sep. were the most important climatic factors and correlated positively with matsutake production. Below average air temperature in June was also beneficial for matsutake production.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.3
• /
• pp.54-60
• /
• 2009

The purpose of this study is to analyze the impacts of three-dimensional land cover on changing urban air temperatures and to explore some strategies of urban landscaping towards mitigation of heat build-up. This study located study spaces within a diameter of 300m around 24 Automatic Weather Stations(AWS) in Seoul, and collected data of diverse variables which could affect summer energy budgets and air temperatures. The study also selected reflecting study objectives 6 smaller-scale spaces with a diameter of 30m in Chuncheon, and measured summer air temperatures and three-dimensional land cover to compare their relationships with results from Seoul's AWS. Linear regression models derived from data of Seoul's AWS revealed that vegetation volume, greenspace area, building volume, building area, population density, and pavement area contributed to a statistically significant change in summer air temperatures. Of these variables, vegetation and building volume indicated the highest accountability for total variability of changes in the air temperatures. Multiple regression models derived from combinations of the significant variables also showed that both vegetation and building volume generated a model with the best fitness. Based on this multiple regression model, a 10% increase of vegetation volume decreased the air temperatures by approximately 0.14%, while a 10% increase of building volume raised them by 0.26%. Relationships between Chuncheon's summer air temperatures and land cover distribution for the smaller-scale spaces also disclosed that the air temperatures were negatively correlated to vegetation volume and greenspace area, while they were positively correlated to hardscape area. Similarly to the case of Seoul's AWS, the air temperatures for the smaller-scale spaces decreased by 0.32% ($0.08^{\circ}C$) as vegetation volume increased by 10%, based on the most appropriate linear model. Thus, urban landscaping for the reduction of summer air temperatures requires strategies to improve vegetation volume and simultaneously to decrease building volume. For Seoul's AWS, the impact of building volume on changing the air temperatures was about 2 times greater than that of vegetation volume. Wall and rooftop greening for shading and evapotranspiration is suggested to control atmospheric heating by three-dimensional building surfaces, enlarging vegetation volume through multilayered plantings on soil surfaces.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.5
• /
• pp.134-147
• /
• 2014

Pleasure grounds, which were introduced during the Japanese colonial era, were places for organizing new amusement activities, and developed into a large-scale private spaces and a new type of public space at the same time. This study explores the scenery and accommodations of pleasure grounds and the changes of the amusement culture through the Wolmido Pleasure Grounds, which was a typical pleasure grounds of the time. At that time, Wolmido became a comprehensive amusement/entertainment place with many elements of both Western and Japanese pleasure grounds such as exotic buildings harmonized with trees, a beach, a seaside school, public playing field, and zoo constructed on the Island. Wolmido Pleasure Ground, which was connected with Kyungsung by Kyungin railroad during the Japanese colonial era, is a good example showing the process of the popularization and commercialization of the amusement culture. The process of popularization of amusement shows the spreading of the enjoyment of leisure time with amusement activities through appreciating the beautiful scenery of the pleasure grounds among various social classes. The caste system was broken and anyone could use the pleasure grounds by paying the fee, of which there were many kinds, so the distinction between genders and the different classes, such as the Chosun people and Japanese, regarding amusement in pleasure grounds disappeared gradually. Also, pleasure grounds were a place for Western hobby-sports activities and were the means to generalize collective and dynamic activities through summer school and various sport games. At the same time, there were places for deviation from the existing social norms when it was combined with entertainment facilities. The commercialization of amusement took place in the form of an artificial entertainment culture within an artificial environment. First, the scenery was artificially constructed and this scenery created the image of paradise such as 'captivating summer vacation spot' and 'water kingdom'. This was the result of the combined intentions of the colonial authority, the railroad company and the amusement corporation to produce economic profits and encourage development in the area. Second, an artificial spectacle was constructed using nature as the backdrop. Buildings of various styles created a modernized and exotic image when they were combined with each other. Artifacts such as breakwaters and arcades created new attractions for people that enabled them to view both nature and the crowds from a whole different perspective. Third, pleasure grounds contributed to the advent of passive users who would just follow the given use and instructions. In this way, one can find the prototype of popular entertainment places of today such as sightseeing complexes, amusement parks, and theme parks through the construction of amusement grounds as a place for providing dynamic activities.

• Progress in Medical Physics
• /
• v.16 no.1
• /
• pp.24-31
• /
• 2005

The stereotactic radiosurgery (SRS) describes a method of delivering a high dose of radiation to a small tar-get volume in the brain, generally in a single fraction, while the dose delivered to the surrounding normal tissue should be minimized. To perform automatic plan of the SRS, a new method of multi-isocenter/shot linear accelerator (linac) and gamma knife (GK) radiosurgery treatment plan was developed, based on a physical lattice structure in target. The optimal radiosurgical plan had been constructed by many beam parameters in a linear accelerator or gamma knife-based radiation therapy. In this work, an isocenter/shot was modeled as a sphere, which is equal to the circular collimator/helmet hole size because the dimension of the 50% isodose level in the dose profile is similar to its size. In a computer-aided system, it accomplished first an automatic arrangement of multi-isocenter/shot considering two parameters such as positions and collimator/helmet sizes for each isocenter/shot. Simultaneously, an irregularly shaped target was approximated by cubic structures through computation of voxel units. The treatment planning method by the technique was evaluated as a dose distribution by dose volume histograms, dose conformity, and dose homogeneity to targets. For irregularly shaped targets, the new method performed optimal multi-isocenter packing, and it only took a few seconds in a computer-aided system. The targets were included in a more than 50% isodose curve. The dose conformity was ordinarily acceptable levels and the dose homogeneity was always less than 2.0, satisfying for various targets referred to Radiation Therapy Oncology Group (RTOG) SRS criteria. In conclusion, this approach by physical lattice structure could be a useful radiosurgical plan without restrictions in the various tumor shapes and the different modality techniques such as linac and GK for SRS.

• Progress in Medical Physics
• /
• v.26 no.1
• /
• pp.12-17
• /
• 2015

The purpose of the Monte Carlo simulation study was to provide the optimized nozzle design to satisfy the beam conditions for biomedical researches in the Korean heavy-ion accelerator, RAON. The nozzle design was required to produce $C^{12}$ beam satisfying the three conditions; the maximum field size, the dose uniformity and the beam contamination. We employed the GEANT4 toolkit in Monte Carlo simulation to optimize the nozzle design. The beams for biomedical researches were required that the maximum field size should be more than $15{\times}15cm^2$, the dose uniformity was to be less than 3% and the level of beam contamination due to the scattered radiation from collimation systems was less than 5% of total dose. For the field size, we optimized the tilting angle of the circularly rotating beam controlled by a pair of dipole magnets at the most upstream of the user beam line unit and the thickness of the scatter plate located downstream of the dipole magnets. The values of beam scanning angle and the thickness of the scatter plate could be successfully optimized to be $0.5^{\circ}$ and 0.05 cm via this Monte Carlo simulation analysis. For the dose uniformity and the beam contamination, we introduced the new beam configuration technique by the combination of scanning and static beams. With the combination of a central static beam and a circularly rotating beam with the tilting angle of $0.5^{\circ}$ to beam axis, the dose uniformity could be established to be 1.1% in $15{\times}15cm^2$ sized maximum field. For the beam contamination, it was determined by the ratio of the absorbed doses delivered by $C^{12}$ ion and other particles. The level of the beam contamination could be achieved to be less than 2.5% of total dose in the region from 5 cm to 17 cm water equivalent depth in the combined beam configuration. Based on the results, we could establish the optimized nozzle design satisfying the beam conditions which were required for biomedical researches.