• The Journal of the Korea Contents Association
• /
• v.14 no.10
• /
• pp.639-648
• /
• 2014

As provider-centered medical environment has changed into consumer-centered, this study intends to improve the efficiency of management by motivation to administrative staffs and improvement in job satisfaction. The purpose of this study is to analyze the factors that influence job satisfaction among administrative staffs in a metropolitan university hospitals. Survey of 305 people in total were used in the data analysis. AMOS 21 Ver. was used to perform Structural model(SEM) equation. First, the validation results showed the follow results $X^2=206.776$, df=77, Q=2.685, P<.001, GFI=.915, TLI=.927, CFI=.946, RMSEA=.074, which supported this research's significance. Second, compensation and working conditions positively affected motivation. Third, motivation positively influenced job satisfaction. Fourth, communication positively influenced job satisfaction. Fifth, after adjusting the mediating effect, in the relationship between compensation and job satisfaction, it was proved that motivation was a complete mediator. Incase of the relationship between the working conditions and job satisfaction, motivation acted as a partial mediator. Fair and reasonable compensation and employment stability, benefits and other working conditions, better internal and external communication between the organization are to increase job satisfaction. To do this, an administrator needs to have attention and will, and a variety of education and training programs need to be developed. The purpose of this study is to provide basic grounds for future policies related to increasing administrative staffs' job satisfaction.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.26.2-26.2
• /
• 2010

최근에는 차세대 조명용 후보광원인 고출력 백색 LED를 개발하기 위한 경쟁이 치열하며, 이를 위해 업체가 고심하고 있는 가장 큰 문제 중의 하나가 칩에서 발생하는 열을 어떻게 관리하는가 하는 방열의 문제이다. 따라서, LED의 가장 큰 특징인 장수명을 손해보지 않기 위해서는 칩에서 발생되고 있는 열을 외부에 확산시키기 위한 기술 개발이 필수적이다. 다양한 방열소재 중 W-Cu 복합재는 W의 낮은 열팽창계수와 Cu의 높은 열전도도로 인해 방열소재로써 유망한 소재로 주목받고 있으나, 우수한 열적 특성을 발현하기 위해서는 고치밀화를 갖는 W-Cu 복합재 제조가 우선적으로 필요하다. W-Cu 복합체는 일반적으로 액상소결법을 통해 균일한 미세조직을 얻을 수 있으나, 열팽창계수를 낮추기 위해 Cu 함량이 적어지게 되면 치밀화가 어려우며 이를 해결하기 위해 나노입자를 갖는 분말을 이용하고자 하는 연구가 많이 진행되고 있다. 본 연구에서는 W과 Cu 산화물을 이용하는 것이 구성성분끼리의 편석이 발생하지 않으며, 소결성도 우수하여 양산화에 가장 접근한 방법으로 알려져 있다. 그러나, 지금까지의 얻어진 W-Cu 복합체의 경우, 분말상태에서의 얻어진 나노입자가 승온시에 마이크로 크기로 과도한 입자성장이 일어나기 때문에 소결 후에도 나노크기를 유지하기 어려울 뿐만 아니라, 구성상끼리의 응집체가 형성된다. 본 연구에서는 액상소결후에 W 입자가 Cu 기지내에 균일하게 분산되는 동시에 나노크기의 입자를 가지는 고분산 W-Cu 소결체를 얻고자 하였다. 이를 위해 금속산화물 분말의 분쇄를 위해 효과적인 방법으로 알려진 습식상태에서의 고에너지 볼밀링을 통하여 혼합된 텅스텐과 구리 산화물 분말의 수소환원공정을 통해 얻어진 100nm 이하의 입자를 가지는 W-20wt%Cu 나노복합분말을 출발분말로 사용하였다. W-20wt%Cu 나노복합분말의 성형체를 $1050^{\circ}C-1250^{\circ}C$의 온도범위에서 소결거동을 조사하였다. 그 결과, $1100^{\circ}C$ 온도에서 이론밀도에 가까운 소결밀도를 나타내었으며, 이는 기존에 비해 $100^{\circ}C$ 정도 치밀화 온도를 낮추는 결과이다. 소결체의 미세구조 관찰결과, 소결 후 약 200nm의 텅스텐 입자가 Cu내에 균일하게 분산되어 있었다. 제조된 W-Cu 시편에 대해서는 LED 응용성을 조사하기 위해 열전도도와 열팽창계수 등을 평가하였다.

• Food Science and Preservation
• /
• v.20 no.3
• /
• pp.386-393
• /
• 2013

This study was conducted to investigate the change in quality attributes of fresh-cut potatoes with heat and browning inhibitor treatment (CW: dip in the cold water for 30 sec at $4^{\circ}C$, HW: dip in the water for 60 sec at $55^{\circ}C$, AA: dip in the 0.1% solution of ascorbic acid for 60 sec at $4^{\circ}C$, HA: dip in the 0.1% solution of ascorbic acid for 60 sec at $55^{\circ}C$) during storage at $5^{\circ}C$. During storage, fresh-cut potatoes treated with HA showed the lowest value in surface color. PPO and PAL activities of fresh-cut potatoes treated with HA were gradually increased during storage. Hardness, weight loss, soluble solids content and moisture content had no significant difference between the treatments. In sensory acceptance, fresh-cut potatoes treated for HA marked the best quality. Conclusively, heat and browning inhibitor treatment showed the positive effect on browning inhibition while maintaining the quality of fresh-cut potatoes.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.124-130
• /
• 2012

The uniform nanofibers of poly(L-lactide-$co$-${\varepsilon}$-caprolactone) (PLCL) with different contents of marine collagen (MC) were successfully prepared by electrospinning method. The effects of the major parameters in electrospinning process such as tip to target distance (TTD), voltage, nozzle size and flow rate on the average diameter of the electrospun nanofiber were investigated in generating composite nanofiber. The diameter and morphology of the nanofibers were confirmed by a scanning electron microscopy (SEM). Also, we measured a water contact angle to determine the surface wettability of the nanofibers. The average diameter of the nanofibers decreased as the value of TTD, MC contents, and voltages increased in comparison with that of pristine PLCL nanofiber. In contrast, the diameter of the nanofibers increased as the flow rate and inner diameter of nozzle increased in comparison with that of pristine PLCL. In addition, the hydrophilicity of the nanofiber and attachment of MG-63 cells on the sheets increased as incorporated collagen contents increased. Therefore, the marine collagen would be a potential material to enhance cellular interactivity of synthetic materials by mimicking the natural tissue.

• Analytical Science and Technology
• /
• v.26 no.3
• /
• pp.174-181
• /
• 2013

Pyrifluquinazon is classified with a quinazoline insecticide that regulates food intake by controling the feeding behavior acting on the endocrine or nervous system of pests such as aphids and white fly. To keep safety on pyrifluquinazon residues in agricultural commodities a simple, accurate and rapid analytical method was developed and validated using high performance liquid chromatograph (HPLC-UVD). The pyrifluquinazon residues acidified with 1% formic acid in samples were extracted with acetonitrile and partitioned with hexane subsequently to dichloromethane then purified with silica solid phase extraction (SPE) cartridge. The purified samples were detected using HPLC-UVD. The method was validated using apple and pear spiked with pyrifluquinazon at 0.02, 0.05 and 0.1 mg/kg and hulled rice, pepper, soybean at 0.05 and 0.1 mg/kg. Average recoveries were 70.5~107.9% with relative standard deviation less than 10%. The result of recoveries and overall coefficient of variation of a laboratory results in Gwangju regional FDA and Daejeon regional FDA was followed with Codex guideline (CODEX CAC/GL 40). This method is appropriated at pyrifluquinazon residues determination and will be used as official method of analysis.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.4
• /
• pp.38-49
• /
• 2020

As the quality of life has been improving, people are getting higher interest and higher expectation for safety. However, the accident rate at the construction site is still high. Therefore, it is urgent to secure the safety at the construction work. Due to the nature of the construction industry, construction sites are directly exposed to the external environment. The possibility of accident occurrence is increased due to various factors such as the always variable processes, the diversity of manpower input, the increase in vulnerable class, and the danger of construction equipment..Particularly, the disasters occurring at the small- or medium-sized construction sites (budget ≤ 12 billion KRW) account for 88.9% of the total disasters at construction sites (73.4% for casualty). It was due to the lack of management caused by the absence of supervisors and insufficient safety measures. Moreover, it is difficult for the small- or medium-sized construction sites to apply basic safety measures such as safety education and safety facility installation by themselves in order to prevent disasters because they don't have sufficient safety organizations. It is because they have relatively less safety personnel and poorer technology system than large-sized construction sites. Therefore, in order to reduce accidents in construction, it is necessary to prevent accidents at the small- and medium-sized construction sites. From this point of view, the objectives of this study were to identify the key risk items causing accidents frequently by analyzing the accidents at construction sites and identifying problems associated with safety management, and to secure the safety at the small- and medium-sized construction sites.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.226-226
• /
• 2008

지난 10여년 동안 Sn-3.0Ag-0.5(wt%)Cu 합금은 대표 무연솔더 조성으로 다양한 전자제품의 실장 및 접합에 적용되어 왔으며, 그 신뢰성 역시 충분히 검증된 바 있다. 그러나 최근 Ag 가격의 급격한 상승과 솔더 접합부의 내 충격 신뢰성을 보다 향상시키고자 하는 업계의 동향은 Ag의 함량이 낮은 무연솔더 조성의 적용 확대를 유도하고 있다. 이에 따라 본 연구자들은 저 Ag 함유 무연슬더로 Sn-1.2Ag-0.5Cu-0.4In 조성을 제안한 바 있는데, 이는 Sn-3.0Ag-0.5Cu 조성 이상의 solderability를 가지면서도 그 금속원료 가격이 약 20% 가량 저렴한 특징을 가진다. 또한 열 싸이클링 (cycling) 테스트를 통한 슬더 조인트의 신뢰성을 평가한 결과, Sn-3.0Ag-0.5Cu에 크게 뒤떨어지지 않는 양호한 특성이 관찰되었다. 따라서 본 연구에서는 열 싸이클링 테스트와 더불어 최근 그 중요성이 지속적으로 커지고 있는 내 충격 신뢰성 평가 시험을 실시하여 개발된 4원계 무연솔더 조성의 기계적 특성을 기존 무연솔더 조성과 비교, 분석해 보았다. 각 솔더 조성은 솔더 볼 형태로 제조되어 CSP(Chip Scale Package) 상에 범핑 (bumping)되었으며, CSP를 PCB(Printed Circuit Board) 상에 실장하는 공정에서도 Sn-3.0Ag-0.5Cu 및 Sn-1.2Ag-0.5Cu-0.4In의 두 종류의 솔더 페이스트가 사용되었다. 본 연구에서의 내 충격 신뢰성 시험에는 자체 제작한 rod drop 시험기를 사용하였는데, 고정된 CSP 실장 board의 후면 부위를 일정한 높이에서 추를 반복적으로 자유 낙하시켜 급격한 충격을 주는 방식으로 실험을 실시하였다. 이 때 추의 무게는 30g, 낙하 높이는 10cm 였으며, 추의 낙하 시 측정된 board 의 휨 변위량은 약 0.7mm로 측정되었다. 사용된 CSP와 PCB 는 모두 daisy chain 방식으로 연결되어 있기 때문에 저항측정기를 사용한 간단한 실시간 저항 측정 방법으로 시험 이력에 따른 파단부의 발생 시점과 대략의 위치를 손쉽게 확인할 수 있었다. 솔더 조인트의 파단 기준 저항값으로 $1000\Omega$을 설정하였으며. 각 조건 당 5 개 이상의 샘플에 대해 평가를 실시한 후 그 평균값을 조사하였다. 시험 결과 제안된 Sn-1.2Ag-0.5Cu-0.4In 조성은 대표적인 저 Ag 함유 조성인 Sn-1.0Ag-0.5Cu에 비해서는 떨어지는 내 충격 신뢰성을 나타내었지만, 우수한 연성에 기인하여 Sn-3.0Ag-0.5Cu 조성에 비해서는 약 2 배 이상 우수한 신뢰성이 관찰되었다. 또한 CSP의 실장 시 Sn-3.0Ag-0.5Cu보다 Sn-1.2Ag-0.5Cu-0.4In 조성 솔더 페이스트를 적용한 경우에서 보다 우수한 내 충격 신뢰성을 나타내어 기본적으로 개발된 Sn-1.2Ag-0.5Cu-0.4In 솔더 페이스트가 Sn-3.0Ag-0.5Cu 조성의 기존 솔더 페이스트 보다 내 충격 신뢰성이 우수함을 검증할 수 있었다. 각 조성의 솔더 조인트를 $150^{\circ}C$ 에서 500시간 aging한 후 실시한 내 충격 신뢰성 평가에서는 모든 조성에서 그 신뢰성이 급감하는 경항을 나타내었으나, Sn-1.2Ag-0.5Cu-0.4In가 Sn-l.0Ag-0.5Cu보다도 그 상대적인 신뢰성이 우수한 것으로 관찰되었다. 이와 같이 aging 후 실시하는 충격시험은 가장 실제적인 상황과 유사한 조건이므로 상기의 실험 결과는 매우 고무적이었으며, 이에 대한 보다 면밀한 분석이 요청되었다. 마지막으로 파면 및 미세조직 관찰을 통하여 각 조성에서의 충격 파단 특성을 비교, 분석해 보았다.

• The Journal of the Korea Contents Association
• /
• v.6 no.4
• /
• pp.146-157
• /
• 2006

Causal relationship means what relations the result occurred have with a fact as a reason. In general, a formular that no result exists without reasons is used for the method to confirm existence and inexistence of causal relationship. Problematic causal relationships in Private Law are reparations (Article No. 393 of Private Law) due to debt nonfulfillment and reparation due to tort (Application of Article No. 393 by Article No. 750, and No. 763 of Private Law). The purpose pursued by reparation system in private law is to promote equal burden of damages, and the range of reparation at this time is decided by the range of damage and the range of damage is decided by the principle of causal relationship. That the causal relationship theory fairly causes confusion by treating one problem and the other problem as the same thing, instead of dividing them according to the purpose of protection presented by the law is a reason of the criticism from different views.

• Journal of dental hygiene science
• /
• v.10 no.5
• /
• pp.403-409
• /
• 2010

The purpose of this study was to examine the teaching efficiency of clinical training for dental hygiene students in Gyeonggi Province. The subjects in this study were 371 dental hygiene juniors in seven different colleges in Gyeonggi Province, on whom a self-administered survey was conducted. The collected data were analyzed with a SPSS WIN 12.0 program, and the findings of the study were as follows: 1. The teaching efficiency of clinical training that the dental hygiene students undergone was on the average. As for evaluation of the factors of teaching efficiency, they gave the highest marks to the role model factor(3.40). 2. The size of the institutions where they received clinical training made no statistically significant differences to the teaching efficiency of their clinical training. The university hospitals ranked first in professional knowledge, one of the sub-directory of teaching efficiency, and the gap between them and the others was statistically significant(p=.005). 3. Concerning links between satisfaction level with the major and view of teaching efficiency, stronger satisfaction with the major led to better perception of teaching efficiency(p=.001). Among the subdirectory of teaching efficiency, that made statistically significant differences to view of interpersonal skills, performance as a supporter, fair evaluation, academic organization skills(p=.005), encouragement and support, teaching methods, professional academic knowledge(p=.001), communicative competency, performance as a role model and cooperation with the staff of dental clinics(p=.000). 4. There were no statistically significant gaps in teaching efficiency according to teaching styles. Among the sub-directory of teaching efficiency, statistically significant differences were found only in encouragement and support(p=.005). The above-mentioned findings suggest that the teaching efficacy of the clinical training was approximately on the average, and that a better satisfaction with the major led to a higher teaching efficacy. Therefore a wide variety of teaching methods and systematic training programs should be developed to boost the quality of clinical training to improve its teaching efficacy.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.6
• /
• pp.853-859
• /
• 2011

We developed and investigated sugar-soaked black soybean snack (SSBSS) to increase the availability of black soybean. The most desirable moisture contents and texture properties of hardness and gumminess in preparing SSBSS were obtained at a sugar concentration of $40^{\circ}brix$ for the first sugar soaking step and $50^{\circ}brix$ for the second sugar soaking process. Sensory evaluation also showed that SSBSS prepared with $40^{\circ}brix$ for first sugar soaking step and $50^{\circ}brix$ for the second sugar soaking process was graded higher than the other samples in all questionnaires. Prepared SSBSS had a final moisture content of $5.50{\pm}0.39%$, crude protein content of $16.25{\pm}0.07%$, and crude lipid content of $34.26{\pm}3.95%$. The ash and carbohydrate contents of SSBSS were $0.51{\pm}0.05%$ and $43.48{\pm}0.01%$, respectively, and the final glucose content was $10.20{\pm}0.10^{\circ}brix$. GABA concentration was $15.24{\pm}1.47\;mg$/g and the contents of daidzein, genistein, daidzin, and genistin were $695.7{\pm}6.08\;{\mu}g$/g, $810.6{\pm}3.9\;{\mu}g$/g, $755.8{\pm}39.6\;{\mu}g$/g, and $1640.7{\pm}390.8\;{\mu}g$/g, respectively. In addition, the phenolic compound and flavonoid contents in SSBSS were $0.16{\pm}0.01$ and $2.33{\pm}0.40\;mg$/g, respectively.