• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.293-296
• /
• 2004

초고압 케이블의 절연물질로 널리 사용되고 있는 가교 폴리에틸렌의 전기적 특성은 라멜라 결정 조직의 밀도와 라멜라 조직의 성장방향과 밀접한 관련이 있는 것으로 알려지고 있다. 본 연구에서는 반도전 물질에 2종의 첨가제를 이용하여 처방한 3종의 반도전 컴파운드에 대하여 시편 제작 조건에 따른 미세 조직을 제어하여 폴리에틸렌의 미세 조직을 변화시킴으로써, 라멜라 조직이 전기적 특성에 미치는 영향을 분석하였다. 전기적 특성은 AC 절연파괴 전압을 측정하였으며, 미세 조직 변화를 조사하기 위하여 TEM 이미지 분석 통하여 라멜라 밀도를 통계적으로 정성 분석하여 상관관계를 규명하였다.

• Journal of radiological science and technology
• /
• v.35 no.2
• /
• pp.157-164
• /
• 2012

The purpose of this study is to analyze the dose distribution when wedge filter is used in the various tissue electron density materials. The dose distribution was assessed that the enhanced dynamic wedge filter and physical wedge filter were used in the solid water phantom, cork phantom, and air cavity. The film dosimetry was suitable simple to measure 2D dose distribution. Therefore, the radiochromic films (Gafchromic EBT2, ISP, NJ, USA) were selected to measure and to analyze the dose distributions. A linear accelerator using 6 MV photon were irradiated to field size of $10{\times}10cm^2$ with 400 MUs. The dose distributions of EBT2 films were analyzed the in-field area and penumbra regions by using dose analysis program. In the dose distributions of wedge field, the dose from a physical wedge was higher than that from a dynamic wedge at the same electron density materials. A dose distributions of wedge type in the solid water phantom and the cork phantom were in agreements with 2%. However, the dose distribution in air cavity showed the large difference with those in the solid water phantom or cork phantom dose distributions. Dose distribution of wedge field in air cavity was not shown the wedge effect. The penumbra width, out of the field of thick and thin, was observed larger from 1 cm to 2 cm at the thick end. The penumbra of physical wedge filter was much larger average 6% than the dynamic wedge filter. If the physical wedge filter is used, the dose was increased to effect the scatter that interacted with photon and physical wedge. In the case of difference in electron like the soft tissue, lung, and air, the transmission, absorption, and scattering were changed in the medium at high energy photon. Therefore, the treatment at the difference electron density should be inhomogeneity correction in treatment planning system.

• Progress in Medical Physics
• /
• v.13 no.4
• /
• pp.202-208
• /
• 2002

The purpose of this study is to evaluate the monitor unit obtained from various methods for the treatment of superficial cancers using electron beams. Thirty-three breast cancer patients who were treated in our institution with 6, 9, and 12 MeV electron beams, were selected for this study. For each patient, irregularly shaped treatment blocks were drawn on simulation film and constructed. Using the irregular blocks, monitor units to deliver 100 cGy to the dose maximum (dmax) were calculated from measurement and three-dimensional radiation treatment planning (3D RTP) system (PINNACLE 6.0, ADAC Laboratories, Milpitas CA) Measurements were made in solid water phantom with plane parallel (PP) chamber (Roos, OTW Germany) at 100 cm source-to surface distances. CT data was used to investigate the effect of heterogeneity. Monitor units were calculated by overriding CT values with 1 g/㎤ and in the presence of heterogeneity. The monitor unit values obtained by the above methods were compared. The dose, obtained from measurement in solid water phantom was higher than that of RTP values for irregularly shaped blocks. The maximum differences between monitor unit calculated in flat water phantom at gantry zero position were 4% for 6 MeV and 2% for 9 and 12 MeV electrons. When CT data was used at a various gantry angle the agreement between the TPS data with and without density correction was within 3% for all energies. These results indicate that there are no significant difference in terms of monitor unit when density is corrected for the treatment of breast cancer patients with electrons.

• Electrical & Electronic Materials
• /
• v.6 no.5
• /
• pp.407-416
• /
• 1993

무산소동을 안정화 모재로한 Cu/Nb-Ti 빌렛트를 제작한 다음 간접 열간방식의 압출에 의해 얻어진 봉재를 인발한 후 신선과 열처리를 반복하여 단심 및 다심 Nb-Ti 초전도 선재를 제조하였다. 가공 조직을 조사한 결과, 단심 선재의 경우 Nb-Ti 심의 단면이 균일하게 가공된 것을 확인하였으며 다심선재의 경우는 신선가공에 의하여 다소 불균질한 필라멘트부분이 관찰되었다. 4.2K, 자장하에서 4단자법으로 직선형 단척시료의 임계전류를 측정하여 가공 열처리 조건에 따른 임계전류밀도의 자장특성을 조사하였는데 열처리시간을 길게하고 가공도를 높인 시료일수록 자장하의 임계전류밀도가 높게 나타나는 것을 확인하였다. 4.2K, 5T 자장하에서 각각 4 x $10^{5}$A/$cm^{2}$ 및 2 x $10^{5}$A/$cm^{2}$의 임계전류밀도를 나타내는 Nb-Ti 단심 및 다심 초전도선재를 제작 할 수 있었다.있었다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.05a
• /
• pp.66-74
• /
• 1999

일반적으로 압출용 빌렛트제조에는 빌렛트상하의 품질변화로 수평연속주조법이 사용되지 않고 있지만 전자기교반법을 이용할 경우 이러한 단점이 없어진다. 따라서 전자기교반장치를 설치한 수평연속주조장치를 이용하여 연주빌렛트를 제조하였다. 최대자속밀도가 1000Gauss 인 전자기교반장치를 설계 제작하였으며, 간접냉각방식의 흑연몰드에서 알루미늄합금을 사용하여 건전한 연주빌렛트를 제조할 수 있는 여러 공정조건을 조사 검토하여 직경 70mm의 기포가 없고 표면이 미려한 등축정을 가진 연주빌렛트를 제조하였다. 인출속도에 따른 수평 연속주조 빌렛트의 표면, 용탕유동라인 및 조직을 검토한 결과 평균인출속도 20mm/min에서 40mm/min까지 아주 미려한 표면특성을 가졌으며, 인출속도가 빠르면 유동라인이 표면에서 중심 쪽으로 완만한 기울기를 가지게 되어 표면응고층이 얇아져 빌렛트가 고액계면에서 끊어지게 되며, 조직미세화는 인출속도가 클수록 미세화되었으나, 결정구상화정도는 인출속도가 빠를수록 악화되었다.

• Development and Reproduction
• /
• v.12 no.3
• /
• pp.243-250
• /
• 2008

Mast cells containing a variety of mediators in their cytoplasmic granules are widely distributed in connective tissues and mucosal surfaces of skin, airways, and guts. Within these tissues, mast cells are involved in the pathophysiological conditions such as inflammation, self-defense, tissue-remodeling, and autoimmunity. In order to understand the functional roles of master cells in the uterus, we histologically examined the distribution and density of uterine mast cells in the different aged mice. Until 6 weeks mast cells were sparsely detected in the uterus. But at 7 weeks after birth, when estrous cycle begins, the number of mast cells within uterine tissues increased dramatically and the increment of mast cell density continued up to 32 weeks-age. After then, uterine glandular tissue degenerated gradually and density of uterine mast cell decreased. Uterine mast cells were mainly found in the myometrium and they were closely associated with smooth muscle cells, fibroblasts, and collagens, which contents were changed according to the uterine development in the myometrium. These results suggest that uterine mast cells could be involved in myometrial contractions mediated by smooth muscle cells and tissue reconstitution or remodeling during estrous cycle and parturition including the various immunological functions.

• Parasites, Hosts and Diseases
• /
• v.30 no.1
• /
• pp.1-14
• /
• 1992

In order to observe the antigenic localization in the tissues of Paragonimus westermani of deve- lopmental stages, immunogoldlabeling method was applied using serum of the cats which were infected with isolated metacercariae from Cambaroides similis. The sectioned worm tissues from orch developmental stage were embedded in Lowicryl HM20 medium, stained with infected semi IgG and protein A gold complex(particle size: 12 nm) and observed by electron microscopy. In the young adult worm tissue of 4 weeks after infection with metacercariae, the gold particles were specifically concentrated on the tegumental syncytium and cytoplasm of the tegumental cells as well as the secretory granules in the parenchymal tissue. The antigenic materials in the adult worm tissue were specifically concentrated on the secretory granules in the parenchymal tissue, the cytoplasm between granules in the vitelline gland and the epithelial lamella in the lumen of the caecum.

• Food Engineering Progress
• /
• v.23 no.4
• /
• pp.283-289
• /
• 2019

This study was performed to determine the effect of psyllium husk addition on the physical properties of rice extrudates. Rice-based formulations mixed with psyllium husk (0, 7, 14 and 21%) were extruded at a die temperature of 140℃, screw speed of 200 rpm, and moisture content of 20%. As the content of psyllium husk increased, expansion ratio decreased, while piece density and specific length increased. Apparent elastic modulus, breaking strength, adhesiveness, and hardness augmented with an elevation in psyllium husk content. Lightness declined as psyllium husk content furthered, while redness, yellowness, and color difference intensified. Water soluble index and water absorption index increased with an increased amount of psyllium husk. In conclusion, the addition of psyllium affected the expansion of extruded rice snack possessing hard texture, small cells, and sticky texture due to higher water absorption during hydration.

• Journal of Korea Foundry Society
• /
• v.21 no.3
• /
• pp.187-191
• /
• 2001

가스분무장치를 이용하여 제조된 304 stainless steel 분말의 미세응고조직 특성을 투과전자현미경으로 관찰하였다. 분말이 sandwich 현상으로 존재하도록 구리로 전기도금한 후 tripod jig 를 이용하여 기계적 연마하여 TEM 시편을 제작하였다. 이 방법으로 제조된 TEM 시편은 넓은 지역에서 200KV 로 가속된 전자가 투과하기에 충분히 얇았으며, 작은 분말의 경우에는 분말 전체를 관찰할 수 있었다. 제한시야회절법(SADP)을 이용하여 100 ${\mu}m$ 이하 분말의 결정구조를 조사한 결과에 따르면 가스분무법으로 급냉응고된 대부분의 분말은 austenite 상으로 응고되었으며, 모든 austenite 분말은 크기에 관계없이 쌍정조직 (twinstructure)이 발견되었으며 그 밀도 역시 아주 높았다. 그러나 직경이 2 ${\mu}m$ 이하의 분말에서는 큰 과냉 (supercooling) 효과에 의하여 준결정상인 bcc 상으로 응고됨을 발견하였다.

• Electrical & Electronic Materials
• /
• v.3 no.1
• /
• pp.36-44
• /
• 1990

본 연구는 34wt%(5Ce-Didymium)-Fe-1wt%B 합금의 분말입도, 성형압력 및 소결온도 에 따른 자기적 성질에 관하여 연구하였다. 그리고 각각의 자기적 성질에 영향을 주는 인자를 알아내기 위하여 밀도측정, 미세조직 및 자구를 관찰하였다. 미세조직은 금속현미경을 이용하여 관찰하였으며 자구는 Bitter법으로 관찰하였다. 결과는 아래와 같다. (1)분말의 입도와 결정립 크기가 작아질수록 경질자기 특성은 증가하였으며 소결온도가 증가할수록 경질자기 특성도 증가하였다. 그러자 압력은 1000kg/$cm^{2}$일때 가장 좋은 경질자기 특성이 얻어졌다. (2)결정립이 클수록 자구의 구조는 복잡했으며 미세한 결정립일수록 큰 결정립에 비해 큰 보자력을 갖는다. 포화된 후에는 거의 모든 결정립이 단자구였으며 열적으로 탈자되었을 경우에는 모두가 multi-domain였다. (3)가장 우수한 경질자기 특성은 3-5.mu.m의 분말을 사용하여 1080.deg.C에서 소결한 후 590.deg.C에서 열처리한 시편에서 얻어졌으며 (BH)$_{max}$는 214.6kJ.m$_{-3}$이다.