• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.8
• /
• pp.753-757
• /
• 2008

In this paper, we propose a new scheduling strategy for dynamic programming in Grid environment. The key idea of this scheme is to reduce the execution time of a job by dividing the dynamic table based on the locality of table and allocating jobs to nodes which minimize network latency. This scheme obtains optimal concurrency by constructing the dynamic table using a distributed top down method. Through simulation, we show that the proposed Grid strategy improves the performance of Grid environment compared to previous branch-bound strategies.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.3
• /
• pp.197-204
• /
• 2006

This paper introduces a development of an internet based robot on the view of product development for hardware and software convergences. The robot can report moving images of remote places and navigate there autonomously. In addition it can be controlled by remote users through wireless internet. Even the control program for the robot can be updated by the remote users during the regular operation mode. This paper provides a consistent product data model and generic product development processes that can support the development of the robot, a convergence of various hardware and software parts. It also includes discussions and experiences about the development of the convergence product.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.12A
• /
• pp.1774-1780
• /
• 2000

본 논문에서는 TDMA 방식의 고속의 버스트 데이터 전송에서 프리앰블의 오버샘플링 데이터 값을 이용한 새로운 피드포워드 타이밍 추정 기법을 제안한다. 제안된 추정 기법은 검출 오류 분산 값 (DEV : Detection Error Variance) 측면에서 기존의 여러 타이밍 추정기법과 MCRB (Modified Cramer-Rao Bound)와 비교되어 진다. 또한, 제안된 타이밍 추정 기법을 고정 샘플링 클럭과 타이밍 보정기로서 보간 필터를 이용한 심볼 동기 블록을 적용하여 이상적인 경우의 BER과 그 성능을 비교한 결과 이상적인 경우에 비해 성능 저하가 BER이 $10^{-3}$인 지점에서 최대 0.2dB 이내임을 확인하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.57-58
• /
• 2018

현재 제조의 생산관리시스템은 다양한 방식으로 메시지 처리기능을 활용하고 있다. 그러나 일부 메시지가 서버를 장시간 점유하여 타 메시지의 처리를 지연 시키거나, 불필요한 과정으로 인하여 발생되는 서버 점유 등 작업부하 현상들이 발견되고 있다. 이러한 문제점들을 최소화하기 위해 부하균등화 작업 및 여러 가지 연구들이 진행되고 있으나, 아직까지 효과적인 메시지 처리에 관한 연구는 미미한 실정이다. 본 논문에서는 휘발성 데이터를 이용하여 불필요한 과정을 최소화 하는 프로세스를 제안한다. 제안된 프로세스를 적용하면 작업부하 현상을 최소화 하여 메시지 처리의 효율성을 향상시킬 것으로 기대된다.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.1
• /
• pp.65-76
• /
• 2007

The likelihood of failure for the stress corrosion cracking (SCC) of caustic cracking, which affect to a risk of facilities, was analyzed through the risk based-inspection using API-581 BRD. We found that SCC of the caustic cracking was occurred above 5 % NaOH concentration, and the technical module subfactor (TMSF) was maximized for above 50 % concentration. The heat traced and monitoring were not sensitive to the TMSF with NaOH concentration and temperature. But the steam out was more of less affect minimum value of the TMSF. Also, the inspection number, the inspection effectiveness, and the year since inspection were very sensitive to the TMSF with NaOH concentration and temperature. Therefore, the plan of next inspection will be established with compositively considering those at once.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.04a
• /
• pp.143-149
• /
• 2007

현행 우리나라의 검사제도는 사업장의 자율관리 능력을 고려하지 않고, 설비의 노후화 및 위험도와 무관하게 획일화된 방식으로 적용하여 설비의 안전성을 확보하지 못할 뿐만 아니라 정기 및 자체 검사를 병행하여 많은 불편이 있다. 따라서 사업장의 불편을 해소하고, 설비의 안전성과 신뢰도를 높일 수 있는 위험기반검사(risk based inspection, RBI)를 국내 실정에 적합하게 도입하기 위하여 사업장, 정부 및 관련 기관에서 향후 추진해야할 방향에 대하여 분석하였다. 국내에서 위험기반검사 제도가 정착될 수 있기 위해서는 먼저 법적 근거가 마련되어야 하며, 법적 제도가 마련되면 사업장에서 RBI를 적용 시 이를 검증하고, 관리할 수 있는 인증기구의 설치가 필요하다. 또한 위험기반검사를 수행하는 사업장에 대해서는 공정안전이행수준과 같은 위험기반검사 이행수준평가를 도입하고, 차등 적용하여 사업장을 관리하는 것이 바람직하다.

• Journal of the Korean Society of Safety
• /
• v.10 no.2
• /
• pp.97-104
• /
• 1995

To evaluate readily the effect of unconfined vapor cloud explosion(UVCE) having high possibility of accident and risk in chemical industries, the expert system of UVCE was developed and its applicability on a real accident was analyzed. We found that the hazard of UVCE could be well evaluated from the TNT equivalency model and the empirical loss data produced by overpressure for chemical facilities. By using the developed expert system, the size of vapor cloud, the quantity of vaporization, the released energy, the overpressure range from explosion point, and the impact damage of each installation could be estimated respectively. Also, probable maximum loss and catastrophic loss potential for real accident( cyclohexane release in Flixborough Nypro company) were estimated and compared with damages of the accident. As a result, the developed expert system could be well applicable to real accident.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06b
• /
• pp.493-496
• /
• 2007

그리드 컴퓨팅은 방대한 데이터 저장 공간과 고성능 연산능력을 요구하는 작업에 적합하다. 동적계획법(dynamic programming)은 방대한 크기의 동적 테이블(dynamic table)을 구성하여 최적해(optimal solution)을 찾기 때문에 그리드에서 수행하기에 적합한 작업이다. 본 논문에서는 동적 테이블을 구성하고 분산 배치하는 할당 정책을 제안한다. 그리고 동적계획법 기반의 어플리케이션을 그리드에서 효율적으로 수행할 수 있는 그리드 시스템 구조를 제안한다.

• Journal of the Korean Institute of Gas
• /
• v.11 no.2 s.35
• /
• pp.15-24
• /
• 2007

For consequence analysis at a gas explosion by vessel release, release rates, demage areas of facilities, and fatality areas were estimated and analyzed at various conditions(release materials, temperatures, pressures, and vessel types) by using the release scenario of API-581 BRD. Simulation results showed that release rates and consequences in the vessel release were higher than those in the pipe release, and the order of release rates and damage areas was as follows; tank>reactor>drum> column.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.4
• /
• pp.1-9
• /
• 2001

Cost-benefit analysis was investigated to propose the analysis method of the effect of investment and the optimum investment level of safety management cost for preventing gas accident in the B governor station. From five classifications of safety management costs consisting of cost items with similar characters and potential accident costs calculated by risk assessments(FMEA/HAZOP), we found that the order of the benefit(the reduction cost of the potential accident cost) was the instrument increase and repair cost > the safety checking and inspection cost > the labor and training cost > the safety equipment and corresponding cost > the research and development cost. As the benefit was increased with increasing the investment cost, the effect of investment was increased with decreasing the Investment cost. As a result, the optimum safety management cost was estimated and the investment level was analyzed by the model of optimum investment level.