• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.1
• /
• pp.11-18
• /
• 2020

The emergence of the flow-through cell (FTC) method has made up for the limitations of previous dissolution test methods, but the high cost of the FTC dissolution devices have seriously hindered the progression of research and application of the FTC. This new design uses a peristaltic pump to simulate the sinusoidal flow rate of a piston pump. The flow profile of each peristaltic pump was sinusoidal with a pulsation of 120 ± 1 pulses per minute, and the flow rate ranged from 1.0 - 36.0 mL/min. The flow control of each channel was adjusted independently so the flow errors of the seven channels were close to 2%. The structure of the system was simplified, and the cost was reduced through manual sampling and immersing the FTC in a water bath. The dissolution rate of the theophylline and aminophylline films was determined, and good experimental results were obtained.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.584-588
• /
• 2001

A conventional power supply to drive a microwave oven has ferro-resonant transformer and high voltage Capacitor(HVC). Though it is simple, transformer is bulky, heavy and has low-efficiency. To improve this defect a high frequency inverter type power supply has been investigated and developed in recent years. But, because of additional control circuit and switching device, inverter-type power supply is more expensive than conventional one. In this study, A new pulse power supply for Microwave Oven using novel HVC embedded high frequency transformer is proposed for down-sizing, cost reduction, and efficiency emprovement of Inverter type power supply. Also, equivalent circuit model is derived by impedance measurements. And the operation of proposed pulse power supply is verified by simulations and experimental results.

• Journal of the Korean Society of Radiology
• /
• v.7 no.4
• /
• pp.277-284
• /
• 2013

This study aims to find out geometric parameters which practitioner adjustable to reduce dose in coronary angiography. We take fluoroscopy and cine exposure by use of phantom, and got dose use the dose-area product(DAP) meter of angiography device, than convert DAP to effective dose. As results, Cine exposure shows higher dose measurement about 6-7 times than fluoroscopy. Dose in frame per second(FPS) mode could be decrease down to 70%, as lower FPS. In view of X-ray tube angle, LAO $45^{\circ}$+Caudal $30^{\circ}$ shows highest dose measurement. More use of Collimator, lower dose measurement. Source-image intensifier distance(SID) get longer to 10cm, dose of each fluoroscopy and cine exposure increase up to 25-30%. Image magnification of field of view(FOV) could increase dose up to 1.21-2 times. Also table-image intensifier distance get longer to 10cm, dose increased 1.11-1.25 times. Practitioner can adjust several geometric parameters, as FPS mode, tube angle, Collimation, SID, table-image intensifier distance, FOV. And each factors can reduce radiation dose in coronary angiography.

• Tribology and Lubricants
• /
• v.28 no.4
• /
• pp.167-172
• /
• 2012

The turbo pump of a liquid rocket engine is composed of three main parts: the oxidizer pump, fuel pump, and turbine. Liquid oxygen ($LO_X$) is the working fluid in the cryogenic environment in the oxidizer pump, but tests are usually performed using liquid nitrogen ($LN_2$), which has a boiling point similar to that of $LO_X$ but is comparatively safer and easier to use for the test. In this study, a bearing test rig is developed and its performance is evaluated using a cryogenic ball bearing with $LN_2$ as the working fluid. Verifying the performance of the bearing test rig is crucial for ensuring correct working of the turbo pump unit in the liquid rocket engine. A stable test rig for the bearing in a cryogenic environment makes the bearing technology enhance its reliability. The test results show that the system operates stably and the requirement of performance time of 500 s is met. The test results of temperature, motor speed, and torque are discussed. The developed cryogenic bearing test rig is expected to help in widening knowledge and expanding research on ball bearings in the future.

• Journal of the Korean Magnetics Society
• /
• v.17 no.2
• /
• pp.71-75
• /
• 2007

Ultrasonic irradiation in a solution during the chemical reaction may accelerate the rate of the reaction and the crystallization at low temperature. We have synthesized nanometer sized zinc ferrite particles using chemical co-precipitation technique through a sonochemical method with surfactant such as oleic acid. The thermal behaviour of the zinc ferrite was determined by the thermoanalytical techniques (TGA-DSC). Powder X-ray diffraction measurements show that the samples have the spinel structure. Magnetic properties measurement were performed using a superconducting quantum interference device (SQUID) magnetometer.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.4
• /
• pp.167-176
• /
• 2017

There are increasing policies and safeguards to prevent various human resource losses with the development of automotive industry. Currently ISO26262 $1^{st}$ edition has been released in 2011 to ensure functional safety of electrical and electronic systems and the $2^{nd}$ edition will be released in the second half of 2016 as part of a trend. The E/E (Electrical & Electronics) system requirements verification is required through walk-through, 인스펙션, semi-formal verification and formal verification in ISO 26262. This paper describe the efficiency of model checking for the E/E system requirements verification by applying the product development project of ASIL (Automotive Safety Integrity Level) D for the electrical parking brake system.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.181-186
• /
• 2012

PMU based power grid monitoring and control system, WAMAC (Wide Area Monitoring And Control) system is required system design for accurate power data without error and loss through a system-wide. In the paper, we propose system design that measured data from PMU transmitted without loss to PDC and DSM server. and we propose a method to verify the real-time "data has been transmitted accurately". Verification system has been designed to reflect the WAMAC system. Therefore the WAMAC can enhance the reliability of the analysis of the data, and it can monitor lossless real-time trend data.

• Journal of Digital Convergence
• /
• v.20 no.2
• /
• pp.21-35
• /
• 2022

In this paper, government R&D supported 310 small and medium enterprises in three main sectors were surveyed and examined the relationship between major factors related to social return using the structural equation model. The main results show that although the level of public awareness of social return and willingness of government R&D supported SMEs are established to some extent, the internal culture and system of SMEs for social return implementation are insufficient, and therefore policy aiming should be placed on establishing internal system of SMEs. In addition, this study suggests that the government policy delivery mechanism should be supplemented to positively increase willingness of SMEs and it is important to pay attention to the growth of SMEs must precede for activation of social return.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.191-197
• /
• 2023

Mobile shooting games are a representative example of PC games being transferred as they are. In the most mobile shooting games, joystick-like UI used in PC games have been moved to touch buttons, but the display is small, so the user's fingers cover the game screen, which is inconvenient. In mobile shooting games, in order to overcome the limitations of the small display and increase the immersion of the game, this paper introduces a user interface that integrates character movement and aiming, and intuitive UIs such as display rotation, shaking, and vibration. In addition, by analyzing the match process for each round, the character's insufficient abilities are identified and synergies to supplement the abilities are recommended in order to add fun to the game. This paper proved that the proposed goals are achieved by actually designing and implementing a mobile shooting game with the proposed functions on an Android smartphone.

• The Journal of the Korea Contents Association
• /
• v.9 no.11
• /
• pp.254-261
• /
• 2009

This study suggested that the table of CT-simulator and the laser alignment system using diagnostic CT scanner have an efficient method for improvement in alignment between the planned target center of traverse image with CT scanner. It was conducted on the daily QA when presented in the AAPM TG66 with correcting the laser alignment system using geometric trigonometric functions and investigated the effectiveness of correction methods as compared with those before and after correction. Before correction error was 3.82mm between the planned target center of image, the table longitudinal axis was twisted with 0.436o. The laser alignment system using geometric trigonometric functions in after correction was satisfied with tolerance limits of ${\pm}2mm$ when occurred about 0.7mm in errors between the planned target center. The table correction to satisfy the geometric accuracy is very inefficient over against the time and economic loss as well as technical limits in the case of application as only radiation therapy associated with CT-simulator with diagnostic CT scanner in use. But, the method which corrects the laser alignment system is economic and relatively simple with possibility of getting well geometric accuracy and we suppose that it is efficient method for applying in the clinic.