• Korean Security Journal
• /
• no.43
• /
• pp.7-35
• /
• 2015

The Ministry of Public Safety and Security was established in order to handle all sorts of disasters because of Sewol ferry tragedy and the fundamental reform on the emergency management system will be performed. The establishment of the Ministry of Public Safety and Security is considered as the landmark for the emergency management when it is compared to those in the United States and Japan in terms of the size and the authority. However, there are many tasks to be done for the settlement of the Ministry of Public Safety and Security. More specifically, a real and substantial plan should be prepared because the organization was established without blueprints or detailed implementation plan. This study suggests that all-hazard approach which is the one of the disaster management principles should be applied when the substantial plan is prepared. All possible hazard should be analyzed, assessed, and prioritized. In addition, Based on the results, the effective policies should be established with the consideration of Korean context.

• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.124-129
• /
• 2021

In this paper, an optimal controller design that guarantees absolute stability is proposed. The order of application of the thesis determines whether the delay time is included, and if the delay time is included, the delay time is approximated through the Pade approximation method. Then, the open loop transfer function for the process model and the controller transfer function is obtained, and the absolute stability interval is calculated by the Routh-Hurwitz discrimination method. In the last step, the optimal Proportional and Integral and Derivative(PID) control parameter value is calculated using a genetic algorithm using the interval obtained in the previous step. As a result, it was confirmed that the proposed method guarantees stability and is superior to the existing method in performance index by designing an optimal controller. If we study the compensation method for the delay time in the future, it is judged that better performance indicators will be obtained.

• Journal of Food Hygiene and Safety
• /
• v.25 no.1
• /
• pp.73-78
• /
• 2010

This research was conducted to assess applicability of photostimulated luminescence (PSL) and Thermoluminescence (TL) methods for investigation of infant and young children products, nut, seasoned dried fish, spice, dried fruits, fruit & vegetable, grain and marine products, which are not approved for irradiation in Korea. PSL results show that the photon counts of non-irradiated samples were lower than 700, while those of irradiated samples were higher than 700. In TL measurement, TL ratio of irradiated samples were higher than 0.1 or ones can decrease below 0.1 whereas the temperature range of TL Glow curve was between $150{\sim}250^{\circ}C$. Monitoring result about 8 class of 325 not approved to irradiated foods, photon counts of samples were less than 700, and after re-irradiation TL Ratio ($TL_1/TL_2$) through re-irradiation step at 1 kGy were higher than 0.1 for the all samples. Therefore, these results suggested that PSL and TL measurements were useful detection methods for 8 class food products not approved to irradiation in Korea and all sample (325 cases) were not irradiated when we analysed by PSL and TL methods.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.4 s.74
• /
• pp.429-440
• /
• 2006

This paper comprises two specific objectives. The first is to examine the applicability of ordinary kriging interpolation(OK) to the p-adaptivity of the finite element method that is based on variogram modeling. The second objective Is to present the adaptive procedure by the hierarchical p-refinement in conjunction with a posteriori error estimator using the modified S.P.R. (superconvergent patch recovery) method. The ordinary kriging method that is one of weighted interpolation techniques is applied to obtain the estimated exact solution from the stress data at the Gauss points. The weight factor is determined by experimental and theoretical variograms for interpolation of stress data apart from the conventional interpolation methods that use an equal weight factor. In the p-refinement, the analytical domain has to be refined automatically to obtain an acceptable level of accuracy by increasing the p-level non-uniformly or selectively. To verify the performance of the modified S.P.R. method, the new error estimator based on limit value has been proposed. The validity of the proposed approach has been tested with the help of some benchmark problems of linear elastic fracture mechanics such as a centrally cracked panel, a single edged crack, and a double edged crack.

• Korean Journal of Materials Research
• /
• v.15 no.4
• /
• pp.240-245
• /
• 2005

An oxygen free copper was severely deformed by accumulative roll-bonding (ARB) process for improvement of its mechanical properties. Two copper sheets 1 m thick, 30 mm wide and 300 m long are first degreased and wire-brushed for sound bonding. The sheets are then stacked to each other, and roll-bonded by about $50\%$ reduction rolling without lubrication at ambient temperature. The bonded sheet is then cut to the two pieces of same dimensions and the same procedure was repeated to the sheets up to eight cycles $(\varepsilon-6.4)$. TEM observation revealed that ultrafine grains were developed after the third cycle, and their size was slightly increased at higher cycles. Tensile strength of the copper increased with the strain at low strain levels, but it hardly increased from 3 cycles $(\varepsilon>2.4)$ due to occurrence of dynamic recovery, even if the imposed strain increased.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.784-789
• /
• 1997

Aluminium solid electrolytic capacitor in which electroconducting polypyrrole(PPy) is used as an electrolyte is studied. Pyrrole(Py) is electrochemically synthesized using the etched and anodized aluminium foil electrode($Al_2O_3$) as an anode on which the thin layer of chemicalpolymerized PPy as a pre-coating layer is formed previously by chemical oxidative polymerization(CP). Investigating the effects of the polymerization conditions on the electrical characteristics of resulting capacitors, the capacitors which were obtained from the galvanostatic electrolysis of pyrrole containing sodium p-toluenesulfonate(TsONa) under the currents of $2.0{\sim}4.0mA/unit(6.5{\times}10mm)$, showed the most superior properties.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.693-697
• /
• 2005

This study was performed to develop accelerated life test method of the wind-turbine gearbox using accumulated damage theory that used to model the fatigue of parts that receive variable load. The accumulated damage theory was introduced, and the estimation of life and calculation of accelerated life test time was illustrated. As the actual application example, accelerated life test method of the gearbox was described. Life distribution of the wind-turbine gearbox was supposed to follow Weibull distribution and life test time was calculated under the conditions of average life (MTBF) 140,600 hours and 99% reliability for one test sample According to the accumulated damage theory, because test time can shorten in case increase test load, test time could be reduced by 1.2 years when we put the load 1.2 times of rated load than 0.93 times of rated load that is equivalent load calculated by load spectrum of the wind turbine. This time, acceleration coefficient was 21.3. This accelerated test method was used to develop accelerated test method of gear reducer, gear and bearing as well as the industrial gearbox and it is considered to be applied comprehensively to mechanical parts the fatigue of which is happened by load or pressure etc.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.214-214
• /
• 2003

제지산업에 경쟁력을 부여할 수 있는 방법의 일환으로 제지용 도공안료의 표면개질을 시도하였다 은(Ag)이 항균력이 있다는 것이 여러 사람에 의해 증명된바 있으므로 이 은의 항균력을 제지용 무기안료에 이산화티탄과 함께 표면개질하고 다기능성 복합 항균분체를 설계하였다. 표면개질장치에 설치한 기상분사장치를 통해 은 용액을 고압기상분사로 TiO$_2$입자 표면에 Coating 하였다 이때의 분무각도는 60$^{\circ}$이고 오리피스 직경은 0.6mm, 분사 압력은 14kgf/$\textrm{cm}^2$ 이다. TiO$_2$에 은 용액을 기상분사하여 코팅시킨 후 표면개질 계산식에 의한 배합비로 모입자(clay, CaCO$_3$, PE)와 자입자(TiO$_2$)를 혼합하였고, 분체의 대전현상을 이용하여 모입자 주위에 자입자를 부착시킨 후, 고속기류중 충격력으로 표면개질처리를 하였다 표면개질 장치를 사용하여 제지용 무기안료 표면에 은용액이 코팅된 TiO$_2$를 개질 시켰다. 각종 물성(항균성, 백색도, 산란도)과 XRD, SEM 측정을 통해 기능성 항균분체의 실용방안 가능성에 대하여 조사하였다.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.4
• /
• pp.479-485
• /
• 2001

Objective : Several conservative treatments have been tried in peripheral facial nerve paralysis, because 80% of patients recover spontaneously. Surgical decompression may be helpful to the residual, medically intractable patients. We present here our experiences of facial nerve decompression via middle fossa approach, which seems to be one of good surgical therapeutic options for medically refractory peripheral facial nerve paralysis. Method : Three cases of medically intractable peripheral type facial paralysis were microscopically operated via middle cranial fossa approach to decompress the labyrinthine segment of the facial nerve and geniculate ganglion by searching landmarks of middle meningeal artery, greater superficial petrosal nerve and facial hiatus. Results : After operation, two cases of Bell's palsy improved substantially and one case of post-traumatic facial paralysis improved partially. Conclusion : This report is presented to describe the surgical facial nerve decompression via middle fossa for early control of peripheral type facial paralysis. Surgical decompression of edematous peripherally paralysed facial nerve could be preferred to conservative treatment in some patients although more surgical experience should be required.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.163-166
• /
• 2009

다중접합 초 고효율 태양전지 제조를 위해 SiC 매트릭스를 이용한 실리콘 양자점 초격자 박막을 제조하고 특성을 분석하였다. $SiC/Si_{1-x}C_x$(x ~ 0.31)로 실리콘 양자점 초격자 박막을 Si과 C target을 이용한 co-sputtering법으로 초격자 박막을 제조하고, $1000^{\circ}C$에서 20분간 열처리를 하였다. high resolution transmission electron microscopy 사진으로 약1~7nm 크기인 양자점 생성과 분포 밀도를 확인할 수 있었으며, grazing incident X-ray diffraction (GIXRD)를 통해서 Si(111)과 $\beta$-SiC(111)이 생성되었음을 알 수 있었다. Auger electron spectroscopy (AES)측정에서 stoichiometric SiC층과 Si-rich SiC층의 Si 원자농도 (56%, 69%)와 C 원자 농도 (44%, 31%)를 알 수 있었으며, Fourier transform infra-red spectroscopy (FTIR)측정에서 SiC 픽의 위치가 767에서 $800cm^{-1}$으로 이동하는 것을 알 수 있었다.