• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.115-116
• /
• 2022

자율운항선박 원격제어시스템 구현을 위해서는 통신네트워크의 활용은 필수적이다. 하지만 현재 VSAT, LTE, WIFI를 활용한 통신네트워크의 방해요인중 하나는 시간지연이다. 다양한 연구를 통해 시간지연의 측정과 감소를 위한 연구가 진행중에 있다. 본 연구에서는 이러한 시간지연에 따라 항해사의 제어형태를 파악하기 위한 준비단계로 해양사고 재결서를 통해 분석한 결과를 바탕으로 시나리오를 개발하여 시뮬레이션을 통한 선박조종성능 만족도 평가를 시행하였다. 향후 이를 바탕으로 시간지연에 따라 원격제어자에게 선박조종성능을 저해하는 요인을 식별하고 이를 제거 및 방지하기 위한 방법에 대해 제안하고자 한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.7 no.3
• /
• pp.1-16
• /
• 2001

In view of the fact that marine casualties have more often occurred recently, there is a need for ship-handling simulator as a useful tool for maritime training, safety assessment and so on. Moreover various kinds of hull forms have appeared for the purpose of improving ship manoeuvrality. Therefore ship-handling simulator is in need of a database for various ships, and it can make diverse maneuvering simulations possible to apply respective mathematical model to ship-handling simulator. In this paper, we adopted twin-screw and twin-rudder ship and discussed mathematical model of maneuvering motions for her. It was discussed from the viewpoint of hull damping forces at low advance speed and interaction between hull, propeller and rudder. Using this model, maneuvering motion of twin-screw and twin-propeller ship was simulated numerically and her principal manoeuvrability was examined.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.305-307
• /
• 2012

제주 강정항 대상선박인 15만톤급 초대형 크루즈선(Queen Mary 2)의 안전 입출항 여부를 판별하기 위하여 항로 중심선 교각을 30도로 변경 풍속을 최대 27노트까지 적용하여 선박조종시뮬레이션을 수행하였다. 시뮬레이션 분석 결과 남방파제 부두는 별다른 문제없이 초대형 크루즈선의 안전한 입출항이 가능하였다. 서방파제 부두는 풍속 20knots까지는 안전성이 확보 되었으나, 풍속 27노트 조건에서는 서측 돌제부두를 축소 조정하거나 가변식으로 변경할 경우 안전성이 더욱 향상되는 것으로 판별되었다. 또한 현행 1.5L 미만에서도 충분하게 180도 선회가 가능함이 검증되었고, 자력으로 안전하게 운항할 수 있는 풍속 범위는 20노트로 판별되었으나 비상사태에 신속하게 대응하고 안전성 향상 차원에서 상시 대마력 예선 2척을 운용할 필요가 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.11
• /
• pp.1036-1042
• /
• 2007

It is rather difficult to improve flight control computer(FLCC) hardware(H/W) development schedule due to lack of commercial off-the-self(COTS) tools or target specific tools. Thus, it is suggested to develop an enhanced process utilizing modeling, simulation and virtual reality tools. This paper presents H/W design process enhancement tool(PET) for FLCC design requirements such as FLCC input/output(I/O) signal flow, I/O fault detection, failure management algorithm, circuit logic, PCB assembly configuration and installation utilizing simulation and visualization in virtual space. New tool will provide simulation capability of various FLCC design configuration including shop replaceable unit(SRU) level assembly/dis-assembly utilizing open flight format 3-D modeling data.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.2
• /
• pp.193-199
• /
• 2013

Course keeping ability of ships under wave are analyzed with wave. The simulation with three degrees of freedom is developed and 3-D source distribution method is applied to get wave force for the simulation. The simulation is conducted with the restriction of maximum rudder angle and time delay of control and regular wave and irregular wave are considered as the source of external forces. Simulations with ships which have different maneuverability with tuned hydrodynamic coefficients are developed to assess the variation of the course keeping ability depending on the ship's maneuvering characteristics. The course Keeping ability is evaluated by comparison of distance while the ships are simulated with autopilot control.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.306-307
• /
• 2022

Recently, in the process of developing, verifying, and upgrading the e-Navigation service and autonomous navigation system, there is an increasing demand for inter-working with a ship-handling simulator that can simulate actual maritime traffic conditions. In this paper, to develop a ship-handling simulation system based on actual maritime traffic conditions, a simulation server was built, received information on the actual maritime traffic conditions from the e-Navigation linkage system, and changed to information for operating the ship-handling simulator. In order to provide simulation images to users, 3D shape modeling for trade ports, coastal ports in Korea and major type of ship were performed. The developed system will be used for the advancement of e-Navigation service, development and verification of autonomous navigation systems, by enabling simultaneous processing of more than 10,000 ships and allowing users to simulate actual maritime traffic conditions in the desired area.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.1
• /
• pp.67-75
• /
• 2023

In this study, the dynamic characteristics of an offshore platform being installed and physical phenomena are analyzed from the perspective of interaction between operation and maneuvering simulation using a real-time Maneuvering & Operation simulator of Shipbuilding & Marine Simulation Center at Tongmyong University. It was simulated to install the semi-submersible drilling rig moored by 8 mooring lines according to a scenario that is similar to it on the real sea, and 4 tug boats for position keeping of the rig and an offshore support vessel for hook-up of the mooring lines were operated. During the simulation, the motion, trajectory, tension of the objects were output in real time, and they were analyzed at each work procedure. This study about the simultaneous simulation of operation and maneuvering showed the detailed motion of the offshore platform and ships on the operation procedure and the interaction between operation and maneuvering in specific environment condition. Also, it confirmed that the simulation can be utilized to determine the possibility of offshore platform installation in specific situations.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.369-376
• /
• 2019

Ship hydrodynamics in the confined waterways is challenging. When a ship is maneuvering in confined waterways, the hydrodynamic behavior may vary significantly because of the hydrodynamic interaction between the bottom of the ship hull and the seabed, or so-called shallow water effects. Thus, an accurate prediction of shallow water and bank effects is essential to minimizing the risk of the collision and the grounding of the ships. The hydrodynamic derivatives measured by the virtual captive model test provide a path to predicting the change in ship maneuverability. This paper presents a numerical simulation of captive model tests to predict the maneuverability of a ship in confined waterways. Also, straight and zig-zag simulation were conducted to predict the trajectory of a ship maneuvering in confined waterways. The results showed that the asymmetric flow around a ship induced by vicinity of banks causes pressure differences between the port and starboard sides and the trajectory of a ship maneuvering in confined waterways.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.3
• /
• pp.93-100
• /
• 2006

Modern versions of supersonic jet fighter aircraft using a digital flight-by-wire flight control system design utilizes a control surface reconfiguration in order to guarantee the aircraft flight stability when a control surface is failed. The T-50 flight control laws are designed such that the surface reconfiguration mode controls the aircraft using non-failed control surfaces when one of the control surfaces is failed. In this paper, linear analysis and HQS(Handling Quality Simulator) pilot simulations are performed to analyze the flight stability and handling quality when the surface reconfiguration mode is engaged for aircraft landing configuration. It is found that the aircraft flight stability and handling quality is satisfied to level 1 requirements when the T-50 flight control law is changed to the surface reconfiguration mode.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.7
• /
• pp.660-665
• /
• 2011

Reconfigurable Flight Simulator for an airborne tactical mission based on virtual reality technology is developed as a software configurable cockpit with computer display as virtual instruments. It can simulate F-15K, KF-16, T/A-50 class fighter and depending on simulated cockpit, control stick and throttle are replaceable. For effective immersion, Video See-Through type HMD is applied.