• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.162-168
• /
• 2018

The UAV(Unmanned Aerial Vehicle) system, including the drone of a variety of fields, which has become an issue and utilized in various fields, has begun to develop in military fields and is actively developed in the commercial field. In various types of UAV systems, which have been developed recently, the communication system that is responsible for the connection between the ground control unit and the UAVs is called the data link. Especially, common data link used in military UAVs is required stability of communication to transmit surveillance and reconnaissance intelligence information and UAV's status. In this paper, the requirement for a modem was defined to secure the communication stability of the common data link used in surveillance UAVs. And, the design of the data link modem to satisfy applicable specifications was proposed. The proposed modem design was verified through the performance measurement of the implemented systems.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.2
• /
• pp.162-172
• /
• 2011

This paper proposes embedded System of two wheeled inverted pendulum robot designed by model based design method, using MATLAB/SIMULINK and LEGO NXT Mindstorms. At first, stability and performance of controller is verified through modeling and simulation. After that direct conversion from simulation model to C code is carried and effectiveness of controller is experimentally verified. Two wheeled inverted pendulum robot has basic function about autonomous balancing control using principle of inverted pedulum and it is also possible to arrive at destination. In this paper, state feedback controller designed by quadratic optimal control method is used. And quadratic optimal control uses state feedback control gain K to minimize performance index function J. Because it is easy to find gain, this control method can be used in the controller of two wheeled inverted pendulum robot. This proposed robot system is experimentally verified with following performances - balancing control, disturbance rejection, remote control, line following and obstacle avoidance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.160-166
• /
• 2018

This paper proposes an advanced suspension system and reports its performance in the framework of the preview control algorithm based on the RPS (road profile sensing) system and MSD system with the multi-stage damping characteristics. Typical disturbance inputs that cause excessive vibration and steering instability of an automobile are irregular obstacles that protrude or sink into the road surface to be driven. The control performance can be improved if information on the existence and shape function of its obstacle is known. Based on the results of the previous study, advanced research that uses the actuating system has been processed to be commercialized practically. For this purpose, a switching algorithm between the control logic and the multi-stage damping system was developed and its connectivity is presented. To verify the applicability of an actual vehicle, the proposed control system was implemented in full vehicle models and simulations were performed. The proposed system using the 3-DS actuator system, which is applied for structural simplicity, can improve the ride comfort and steering stability. In addition, the results indicate the feasibility of the intelligently controlled suspension system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.4
• /
• pp.332-340
• /
• 2011

A missile with a strapdown seeker should properly estimate line-of-sight(LOS) rate using its attitude information and the look angle of the seeker because LOS rate information in an inertial coordinate system, which is used for a proportional navigation(PN) homing guidance, can not be obtained directly. However, an unnecessary feedback loop(Parasite Loop) is formed in the guidance and control loop, and it may cause the guidance performance degradation or even the unstability of the system(Parasite Effect). This paper presents estimation methods for the LOS rate information and effective ways to minimize the parasite effect using Routh-Hurwitz stability criterion. Various numerical simulations are also included to verify the proposed methods.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.7
• /
• pp.800-806
• /
• 2016

The maneuverability of a tugboat is affected by the slewing motion of a barge while the tug is navigating with the barge in water. Therefore, it is necessary to reduce the slewing motion of the barge to allow for safe towing work. In this study, a water tank experiment was performed to examine the factors affecting the slewing motion of a barge and improve course stability. The characteristics of slewing motion vary according to bow shape. Three barge models, each with a different bow shape, were selected as experimental subjects. A comprehensive analysis was performed to study the effects of various factors on the slewing motion of a barge such as the presence of a skeg and bridle, towing speed, and the length of the towline. The effect of the location of the skeg varied according to bow-hull form. The slewing motion of the barge decreased as the length of the towline increased, and this decrease was even greater when a bridle was connected to the towline. In addition, the slewing motion decreased significantly as the length of the bridle increased. The slewing angles did not show significant change with respect to towing speed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1421-1426
• /
• 2012

Cornering maneuvers with reduced body roll and without comfort loss are important requirements for car manufacturers. An electric active roll control(ARC) system controls the body roll angle by using motor-driven actuators installed at the centers of the front and rear stabilizer bars. Co-simulation using the Matlab/Simulink controller model and the CarSim vehicle model was proposed to evaluate the performance of the ARC control algorithm. To validate the performance of the ARC actuator and system, bench tests and vehicle tests were proposed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.4
• /
• pp.443-450
• /
• 2011

Fuel gas compressor system is applied to medium FPSO. In order to avoid surge, this system used the anti-surge valves. When surge occurs it may lead to system's fracture. So anti-surge valves are evaluated structural strength and structural safety. Especially, in emergency mode, valves are must be guaranteed structural safety. In this study, structural strength and structural safety of anti-surge valve was evaluated using the numerical simulation. Unigraphics NX 4.0 was used as Geometrical models, structural strength and structural safety calculation were carried out by ANSYS Workbench 12.1. The ASME Boiler & Pressure Vessel Code is refer to allowable strength and safety factor of the valves.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.31-38
• /
• 2002

This paper presents the analysis of the flight test data measured by the sensors installed on a four-seat canard aircraft. The inherent stall proof characteristics of canard aircraft was verified from the stall test. The dihedral effect, adverse yaw and roll control power were examined and the neutral point that determines the longitudinal stability of the aircraft was investigated. The dynamic characteristics such as dutch roll mode were also examined. Without relying on the parameter identification method, the aerodynamic derivatives or the relations between the aerodynamic derivatives were obtained by analyzing the steady state flight data.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.55-59
• /
• 2008

The tug boat is restricted in her maneuvering ability due to the towed barge, and tug-barge have been strongly affected by the external forces, i.e. the wind, wave, currents, and so on. Therefore it is difficult to get the safety if tug-barge operation. In this study, we propose the basic method to develope the safety towing system for barge using portable GPS which is easily movable and relatively inexpensive. Then we have conducted the test on the real barge and discuss the results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.431-437
• /
• 2017

In this study, based on the RPS algorithm, the application results to an electrically controlled suspension system using previewed road information are presented. Reducing the excessive vibration induced by a disturbance transmitted to the system and secure its stability is a major issue. In particular, in the automotive industry, the demand is constantly being raised. A typical external disturbance causing vibration and instability of a vehicle is an irregular roadway surface that contacts a running vehicle tire. Therefore, obtaining such profile information is an important process. The RPS algorithm using a multi sensor system was constructed and implemented in a real car. Through experimental work using the RPS system included non-contact type optical sensors, it could robustly reconstruct the road input profiles from the intermixed data onto the vehicle's dynamic motion while traveling at an uneven roadway surface. A controller with a preview control was designed in the framework of a semi-active suspension system based on the 7 degrees of freedom full vehicle model. The control performance of the system was evaluated through simulations and the results were compared with the passive vehicle condition. These results highlight the feasibility of the presented control frame.