• Proceedings of the Korean Society of Computer Information Conference
• /
• 2012.07a
• /
• pp.47-50
• /
• 2012

본 연구에서는 수용가에서 에너지 절감과 최대수요전력 제어를 위하여 마이크로프로세서를 이용한 고효율 자동 전압 조정기의 제어 방법에 대하여 제안한다. 제안한 고효율 자동 전압 조정기는 트로이달 코아에 1개의 직렬 권선과 분리된 4개의 분로 권선으로 구성되어 있는 단권 변압기를 사용한다. 변압기의 전압 조정은 직렬 권선과 분로 권선의 연결 방법에 따라 감압/승압이 가능하다. 스위치는 릴레이와 트라이악을 병행하여 사용한다. 스위치의 조작 시 발생하는 권선의 여자돌입전류를 제어하기 위하여 트라이악을 이용 연결 상태를 변경하고 연결 상태 유지 시에는 릴레이를 이용함으로써 스위치 소비 전력을 최소화 한다. 제어신호는 여자 돌입 전류를 줄이기 위하여 전압 파형에 동기화 하여 제어되며 이를 위하여 소프트웨어 PLL을 사용한다. 소프트웨어 PLL은 전압 파형의 zero-cross, 전압 최고점 등의 시간을 생성한다. 권선 스위치의 제어, 소프트웨어 PLL등 자동 전압 조정기의 제어는 마이크로프로세서에 의해서 이루어진다.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.31-39
• /
• 2012

In this paper, we propose a microprocessor-based automatic voltage regulator(AVR) to reduce consumers' electric energy consumption and to help controlling peak demanding power. Hybrid Switching Automatic Voltage Regulator (HS-AVR) consist of a toroidal core, several tap control switches, display and command control parts. The coil forms an autotransformer which has a serial main winding and four parallel auxiliary windings. It controls the output voltage by changing the combination of the coils and the switches. Relays are adopted as the link switches of the coils to minimize the loss. To make connecting and disconnecting time accurate, relays of the circuit have parallel TRIACs. A software phase locked loop(PLL) has been used to synchronize the timings of the switches to the voltage waveform. The software PLL informs the input voltage zero-crossing and positive/negative peak timing. The traditional voltage transformers and AVRs have a disadvantage of having a large mandatory capacity to accommodate maximum inrush current to avoid the switch contact damage. But we propose a suitable AVR for every purpose in smart grid with reduced size and increased efficiency.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.9
• /
• pp.749-757
• /
• 2021

In transportation missions using quadrotor, the payload may change the model parameters, such as mass, moment of inertia, and center of gravity. Moreover, if position of the payload is constantly changing during flight, the effect can adversely affect the control performances. To handle this issue, we suggest Model Reference Adaptive Control based on Linear Quadratic Regulator(LQR+MRAC) to compensate the uncertainty caused by payload. Firstly, the mathematical modeling with the fixed payload is derived. Second, Linear Quadratic Regulator (LQR) is used to design the reference model and baseline controller. Also, through the Stability method, Adaptive law is derived to estimate the model parameters. To verify the performance of proposed control scheme, we compared LQR and LQR+MRAC in situations where uncertainties exist. And, when the disturbance exist, the classic MRAC and proposed controller is compared to analyze the transient response and robustness.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.163.2-163.2
• /
• 2012

다목적실용위성 3호는 2012년 5월 발사되어, 위성 기능점검을 위한 시험을 성공적으로 완료하였다. 위성이 발사체로부터 분리된 이후 임무궤도(고도 685km, 승교점 지방시 13시 30분을 갖는 태양동기궤도)를 획득하기 위해서는 궤도조정이 필요하다. 본 논문에서는 다목적실용위성 3호의 초기운영 기간 동안 수행한 총 10번의 궤도조정 계획 및 결과에 대해 기술하였다. 궤도조정 1 단계에서는 궤도조정 절차 및 기능을 점검하기 위해 6번의 시험 궤도조정을 순차적으로 수행하였고 이후 2 단계에서는 임무궤도 진입을 위해 4번의 궤도조정을 실시하였다. 궤도조정을 위해서는 원하는 추력분사 방향을 맞추기 위해 롤 방향 또는 피치 방향의 자세제어가 필요한데, 추력기를 사용하여 자세를 기동하는 모드(Del-V Mode)와 휠을 사용하여 자세를 기동하는 모드(Fine Del-V Mode)로 구분된다. 시험 궤도조정에서는 우선적으로 두 가지 모드에 대한 모드전환 시험을 실시하여 위성체 및 지상국 운영절차에 대한 이상 유무를 점검하였고, 이후 추력기 분사량을 10초로 설정하여 예측 대비 실제 궤도변경 결과값을 확인하였다. 시험 궤도조정의 결과를 토대로 본 궤도조정에서는 임무궤도를 획득하기 위한 경사각 조정 및 고도 조정을 수행하였다. 경사각 조정 시에는 승교점 지방시의 변화량을 줄이고, 이후 자연 교란력에 의한 궤도변화를 고려하여 목표궤도를 계획하였다. 또한, 고도 조정 단계에서는 연료 사용량 및 이심률 변화를 최소화 할 수 있도록 전형적인 호만 궤도천이 방식을 적용하였다. 궤도조정 결과 당초 목표한 값을 정확하게 달성하였고, 궤도조정 이후 궤도변화도 장기간 동안 임무궤도 범위를 유지함을 확인할 수 있었다.

• Journal of the Korean Institute of Gas
• /
• v.9 no.3 s.28
• /
• pp.44-48
• /
• 2005

Experimental works were carried out to evaluate the service life of low pressure LPG regulators for domestic use. Experimental results showed that the operating pressure of regulators used for 7 years notably deviated from the standard value of the adjusting pressure and the lock-up pressure. Thus, it is estimated that low pressure LPG regulators have approximately 6 years of service life.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.4
• /
• pp.42-48
• /
• 2002

The case that cannot show the satisfactory control results with a modeling error and a shortage of related knowledge about a plant is if a fuzzy controller designed based on the plant model or the experience applies to an actual plant. We must adjust the scale factor which is a controller again in order to improve control performance in case of this and needs a lot of time and costs because this regulation process is carried out with a trial and error way We proposes the fuzzy controller that an automatic control adjust scale factors according to fuzzy logic and normalizer in this paper We confirmed that an automatic adjusted fuzzy controller displayed good performance than the fuzzy controller that scale factors was fixed through simulation. We implemented the controller using the DSP processor and applied in a hydraulic servo system. And then we observed an experimental results.

• Journal of the Korean Vacuum Society
• /
• v.10 no.2
• /
• pp.145-154
• /
• 2001

A new type of modular mirror manipulator with independent adjustability was developed for the EPU6 beamline under construction at the Pohang Accelerator Laboratory. The mirror manipulator was designed so that the angular displacements of roll and pitch rotations do not introduce translational displacements and are independent with each other by positioning the mirror center to the center of a newly devised spherical joint. Manipulating its roll and pitch micrometers, the rotation angles of a dummy mirror were measured at an accuracy of 5 $\mu$rad using a gravity-referenced inclinometer. While the designed angular resolution was 3.937 $\mu$rad/$\mu\textrm{m}$, measured angular resolutions were 3.94 $\mu$rad/$\mu\textrm{m}$ for roll rotation and 3.85 $\mu$rad/$\mu\textrm{m}$ for pitch rotation. The effect of roll rotation on pitch angles was measured to be -3.18% and the effect of pitch rotation on roll angles was measured to be -5.21%. As the mirror manipulator was designed with emphases on independent adjustability and standardization, it results in eases of manufacturing, installation and adjustment as well as reductions of development period and design cost of mirror manipulators for various types of mirrors.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.505-510
• /
• 2004

In this article, we present an automated system for adjusting the 6 degree of freedom (D.O.F.) circular fixator. The system includes a scheduling software to adjust the Hexapod Circular Fixator (HCF) and an automated strut with the ability of the multiple synchronized motion and independent motion. The HCF was designed to control a 6 D.O.F. Ilizarov fixator and it's mechanism. The HCF adjustment software evaluates each value of altered length of the HCF struts to correct the complex skeletal deformity by using the X-ray data of the patient. The data of HCF adjustment software feed into the automated strut system which provides the scheduled adjustment. Then, the automated strut is synchronized by input data. Also the data of HCF adjustment software can be used to adjust HCF without automated struts. The proposed HCF system was verified by experiments.

• Journal of Science and Technology Studies
• /
• v.3 no.1 s.5
• /
• pp.105-156
• /
• 2003

This paper aims to explore the cause and aspect of inter-ministerial policy conflict and its coordination in science and technology policy-making with the case of science and technology basic law-making process in Korea. This law-making processes are analysed through the three periods for the last 10 years starting 1992, such as law-formulation(1st) period, interim law-making (2nd) period, and final law-making(3rd) period. Based on these steps, it tries to concretely describe the phenomenon of policy conflict and the coordination mechanism among government departments and analyses the characteristics of dynamic interaction and mutual adjustment among the related agencies. The analysis is mainly focussed on the underlying causes and determinants of policy conflict, the development and coordination process of the conflict, the strategies and logics of the conflict participants, and eliciting some policy implications for effective policy coordination among government departments. Research results are summarized as follows. First, in science and technology policy-making the main causes of policy conflict among government departments are attributed to the difference of policy-orientation and jurisdiction-orientation of each agency. During the first period, the main aspect of policy conflict was policy-oriented, during the second, the main aspects of policy conflict were both policy-oriented and jurisdiction-oriented, and during the third, policy-oriented conflict was dominant. Second, the dominant typology and strategies of policy coordination which the participants used were vertical-political and horizontal-analytic approach. During the first period, horizontal and analytical approach were used, during the second, horizontal and political approach are mixedly used, and during the third, vertical and political approach were dominantly used. Third, The Korean National Assembly and the ruling party played a pivotal role in science and technology policy-making process(the basic law-making process) in particular during the final period.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.1
• /
• pp.18-26
• /
• 1975

In this paper, a frequency controlled bandwidth adjustable bandpass filter consisting of 4-path system is precented. It is shown that this system has characteristics similar to ihose of the magneticuly coupled double tuned amplifier and the center frequency of the passband is able to be shifted contineolisly. The adjustable range of the bartdwidth of the filter system is anslyzed for she case of the double and single tuned characteristics. The experiment has been conducted to verify the theory of this system and the experimental resulis are in good agreement with the theoretically calculated values.