• Journal of Bio-Environment Control
• /
• v.11 no.2
• /
• pp.93-100
• /
• 2002

This study was carried out not only to develop CFD model for numerically simulating fog cooling system but also to verify the validity of the developed model by data measured in fag cooling greenhouse. In addition the developed model was applied to investigate the effects of spraying water temperature, spraying water amount, spraying interval and evaporation percentage on the performance of the fog cooling system. According to the simulation results, the temperature differences between the measured and predicted temperatures at each measurement point were $0.1~1.4^{\circ}C$ in case of no shading and $0.2~2.3^{\circ}C$ in close of shading. The humidity differences were 0.3~6.0% and 0.7~10.6%, respectively in the cases of no shading and shading. Because the predicted data showed a good agreement with the measured ones, the developed model is supposed to be able to predict the cooling effect of the fog cooling system. The performance of fog cooling system was greatly influenced by spraying water amount, spraying interval and evaporation percentage, but it was not influenced by spraying water temperature.

• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.706-713
• /
• 2015

Graphite foams (GFs) were prepared by adding different amounts of mesophase pitch (MP) into polyvinyl alcohol-acrylic acid (PVA-AAc) solution followed by the heat treatment. It was confirmed that the pore diameters of GFs were controlled by the slurry concentration, which was the mesophase content added in polymer solution, and their thermal conductivity and compressive strength were also controlled by porosities of GFs formed at different conditions. The resulting GFs in this study had the highest thermal conductivity of $53.414{\pm}0.002W/mK$ and compressive strength of $1.348{\pm}0.864MPa$ at 0.69 in porosity. The thermal conductivity of MP based GFs increased approximately 23 times higher than that of using isotropic pitch based GFs due to the developed graphitic structure.

• Korean Journal of Plant Resources
• /
• v.18 no.3
• /
• pp.410-416
• /
• 2005

Rhodiola sachalinensis has been used as a traditional medicine in Asia. We were germination in vitro seedling of grow naturally in Chang bai Moutain. And callus induction from leaf segments, treatmented plant regeneration in plant growth regulators (Auxins and cytokinins). We investigated optimal conditions for efficient plant regeneration through callus induction and shoots formation on medium with various kinds of growth regulators. Callus induction and adventitious shoots formation was achieved when cytokinin and auxin combinated to this experiment. Especially, there was the highest callus induction rates when we were used to 1 mg/L kinetin and 2 mg/L NAA $(98\%)$, Adventitious shoots formation wear obtained difference rate when cytokinin alone 1 mg/L BA $(96.6\%)$. And regenerated plantlet was acclimatized and transplanted to the soil, showed $100\%$ survival.

• Journal of Life Science
• /
• v.9 no.1
• /
• pp.69-75
• /
• 1999

Four species belonging to the Drosophila melanogaster complex were examined genetically and morphologically to analyze interspecific relationships. Insemination rates ranged from 96% to 99% within species crosses, but interspecific crosses among the four species exhibited a great variations in the frequency of successful matings. D. melanogaster females mated relatively well with males of other species and D. sechellia males were more successful in mating with females of other species. In the crosses among D. simulans, D. mauritiana and D. sechellia, hybrid flies were fertile in females, but sterile in males regardless of reciprocal matings. The phenogenetically relationship between this complex and their hybrids were investigated by the comparison of sex comb tooth number and genital arch of male. They were controlled by polygenic factors on the chromosome of both parents. The effects of temperature on viability of hybrids between D. melanogaster females and D. simulans males were investigated for detection of genes concerning the speciation. The temperature sensitivity of the hybrid was mainly controlled by genes located on the X chromosome of D. simulans males.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.3
• /
• pp.322-327
• /
• 2007

Researchers in the field of psychology used Electroencephalographic (EEG) to record activities of human brain lot many years. As technology develope, neural basis of functional areas of emotion processing is revealed gradually. So we measure fundamental areas of human brain that controls emotion of human by using EEG. Hands gestures such as shaking and head gesture such as nodding are often used as human body languages for communication with each other, and their recognition is important that it is a useful communication medium between human and computers. Research methods about gesture recognition are used of computer vision. Many researchers study emotion recognition method which uses one of physiological signals and gestures in the existing research. In this paper, we use together physiological signals and gestures for emotion recognition of human. And we select the driver emotion as a specific target. The experimental result shows that using of both physiological signals and gestures gets high recognition rates better than using physiological signals or gestures. Both physiological signals and gestures use Interactive Feature Selection(IFS) for the feature selection whose method is based on a reinforcement learning.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.7
• /
• pp.1-8
• /
• 2004

A simple AMC (Adaptive Modulation and Coding) technique using ARQ (Automatic Repeat Request) for a MIMO (Multiple Input Multiple Output) system is proposed which does not require the additional feedback. In addition, the proposed AMC technique is different from the conventional technique in the aspect of considering the MCS (Modulation and Coding Scheme) level from the previous packet. The proposed technique can discard fewer amounts of unsuitable packets than the conventional technique. In the proposed system not only same rate control method for transmit antennas but also individual rate control method can be applied. The performance of the proposed technique is verified under a MIMO-OFDM (Orthogonal Frequency Division Multiplexing) system based on WLAN (Wireless Local Area Network), IEEE 802.11a. The results of the computer simulation show that a MIMO system with the proposed technique achieves higher throughput than one with a fixed transmission rate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.128-128
• /
• 2000

박막의 탄성 특성을 평가하는 방법으로 nano-indentation, Brillouin light scattering measurement, ultrasonic surface wave measurement, bulge test, vibration membrane method 등 여러 가지가 제시되어 왔다. 이러한 방법들은 필름의 두께가 일정 두께 이상이 되어야 정확한 측정이 가능한 방법으로 매우 얇은 박막에서도 탄성특성을 평가할 수 있는 freehang, bridge 방법이 제시되었으며, 이 방법은 간단한 식각 공정을 통해 매우 얇은 박막에도 적용시킬 수 있다는 장점을 가지고 있다. 본 연구에서는 아주 얇은 박막에서도 탄성특성을 평가할 수 있는 freehang 방법을 이용하여 순수한 Diamond-like carbon (DLC) 필름과 Sidl 첨가된 DLC 필름의 탄성 특성을 평가하고자 한다. 실험에서 사용한 필름은 rf-PACVD 장비를 이용하여 증착하였다. 이때 전극과 플라즈마 사이의 바이어스 음전압은 -400 Vb로 합성압력은 10mTorr로 고정하였다. 사용한 반응 가스는 벤젠(C6H6), 그리고 벤젠과 희석된 실렌(SiH4 : H2 = 10 : 90)이며, 희석된 실렌의 첨가량을 조절하여 필름 내에 일정량의 Si을 함유시켰다. 각각의 조건에서 증착시간을 조절하여 필름의 두께를 변화시켰으며, KOH(5.6mol) 용액을 이용하여 습식 식각을 함으로써 freehang을 제작하였다. 이때 식각액에 의한 DLC 필름의 손상은 관찰되지 않았다. 필름의 잔류 응력을 측정하기 위해 200$\pm$10 혹은 100$\pm$5$\mu\textrm{m}$ 두께의 얇은 (100) Si wafer를 5$\times$50 mm2의 strip 형태로 절단하여 사용하였다. 필름의 압축 잔류 응력에 의해 발생한 필름/기판 복합체의 곡률은 laser 반사법과 $\alpha$-step profiler를 이용하여 측정하였으며, 이 결과를 Brenner 등에 유도된 식을 이용하여 잔류 응력을 계산하였다. 또한 제작된 frddhang은 광학 현미경과 전자주사현미경에 의해 관찰되었다. 이렇게 제작된 freehang을 이용하여 필름이 기판에 부착되기 위해 필요한 변형률을 측정하고, 독립적으로 측정된 필름의 잔류 응력을 박막의 응력-변형률 관계식에 적용하여 biaxial elastic modulus, E/(1-v)를 구할 수 있었다. 측정 결과 필름의 잔류 응력과 biaxial elastic modulus는 필름의 두께가 감소함에 따라 감소하는 경향을 나타냈으며, 같은 두께의 필름인 경우, 식각 깊이에 따른 biaxial elastic modulus 의 변화를 통해 최적의 식각 깊이를 알 수 있었다.

• Journal of Bio-Environment Control
• /
• v.6 no.1
• /
• pp.55-65
• /
• 1997

This study was conducted to develop a robotic transplanter for bedding plants. The robotic transplanter consisted of machine vision system, manipulator attached with the specially designed gripper, and plug tray transfer system. Results of this study were as follows. 1. A machine vision system for a robotic transplanter was developed. The success rates of detecting empty cells and bad seedlings in 72-cell and 128-cell plug-trays for cucumber seedlings were 98.8％ and 94.9％ respectively. The success rates of identifying leaf orientation for 72- cell and 128-cell plug-trays were 93.5% and 91.0%, respectively. 2. A cartesian coordinate manipulator for a robotic transplanter with 3 degrees of freedom was constructed. The accuracy of position control was $\pm$ 1mm. 3. The robotic transplanter was tested with a shovel-type finger. Without considering leaf orientation, the success rates of transplanting healthy cucumber seedlings for 72-cell and 128-cell plug-trays were 95.5% and 94.5%, respectively. Considering leaf orientation, the success rates of transplanting healthy cucumber seedling in 72-cell and 128-cell plug-trays were 96.0% and 95.0%, respectively.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.144-144
• /
• 2012

스퍼터링 기술은 타겟 사용 효율 및 증착률 향상 개념에서의 소스 특성향상과, 증착 기판으로 이동하는 스퍼터링 입자량 및 이온화율 제어를 통한 코팅 박막의 특성향상 등 크게 두 축을 중심으로 발전되어 왔다. 특히 소스 특성 향상 관점에서 고진공에서의 스퍼터링 기술, 듀얼 마그네크론 스퍼터링 및 무빙 마그네트론 스퍼터링 기술 및 원통형 스퍼터링 기술이 개발되어왔으며, 코팅 박막의 특성 향상과 관련하여서는 스퍼터링 방전 내 플라즈마의 밀도의 증대 및 기판 입사 입자의 에너지 제어를 통한 박막의 치밀도 향상 연구가 많이 이루어져, UBM 또는 ICP 결합 스퍼터링 및 Arc-스퍼터링 혼합공정이 연구되어 왔다. 박막 증착에서 박막의 물성을 조절하는 주요인자는, 기판에 입사하는 입자의 에너지로, 그 조절 범위가 좁고 넓음에 따라 활용 가능한 코팅 공정의 window가 설정된다. 지난 15년간 증착박막의 물성 향상을 위하여 스퍼터링 소스의 제어 관점이 아닌 전원적 관점에서 스퍼터된 입자의 에너지 제어를 MF(kHz), Pulse 전원 사용을 통해 이루어져 왔고, 특히 High Impulse Pulse를 이용한 HiPIMS 기법이 연구개발과 시장의 이해가 잘 어울려져 많은 발전을 이루고 있다. HiPIMS 공정은 박막의 물성을 제어하는 관점을 스퍼터링에 사용되는 보조 가스인 Ar 이온에 의존하지 않고, 직접 스퍼터된 입자의 이온화를 증대시키고, 이 이온화된 입자를 활용하여 증착 박막의 치밀성 및 반응성을 증대시켜, 박막특성을 제어하는 기술이다. HiPIMS의 경우, 초기 개발 당시에는 고에너지, 고이온화의 금속 이온을 대량 생성할 수 있다는 이론적 배경에서 연구되었다. 그러나 연구 개발이 진행되면서, 박막의 물성과 증착률 등 상반된 특성이 나타나면서 이에 대한 전원장치의 개량이나 스퍼터링 소스의 개선 등 다양한 개발 연구들이 요구되고 있다. 재료연구소에서는 스퍼터링 기술에서 가장 문제가 되고 있는 타겟 사용효율화 관점 및 스퍼트된 입자의 이온화률 증대에 대한 두 가지 문제를 동시에 해결할 수 있는 방안으로 고밀도 플라즈마를 이용한 스퍼터링 기술을 개발하고 있다. 본 발표에서는 이러한 HiPIMS의 연구 개발 동향과 고밀도 플라즈마를 이용한 스퍼터링 기술에 대한 연구 동향을 발표하고자 한다.

• Journal of Digital Convergence
• /
• v.17 no.8
• /
• pp.337-346
• /
• 2019

This study aimed to assess trends in the prevalence, treatment, and control of diabetes according to the socio-economic level in Korean adults aged ${\geq}30$ years, using the 2007-2017 Korea National Health and Nutrition Examination Survey data. Socio-economic status was assessed based on the household income. Multivariable logistic regression and predictive margins were used to evaluate the adjusted proportion of diabetes prevalence, awareness, treatment, and adequate glycemic control. During 2007-2017, the socio-economic inequalities on diabetes prevalence were observed in both men and women. However, the gradient of inequality increased only in men (p for interaction=0.034). Diabetes awareness, treatment, and control did not show socio-economic inequalities or increasing gradients in both sexes. Monitoring of these trends should be continued, and further research on effective interventions is needed.