• Journal of KIISE:Information Networking
• /
• v.36 no.2
• /
• pp.143-152
• /
• 2009

IEEE 802.11 WLANs provide multiple transmission rates to improve the system throughput by adapting the transmission rate to the current wireless channel conditions. Many rate adaptation schemes have been proposed because IEEE 802.11 standard does not contain any specifications for the rate adaptation scheme. In this paper, in order to overcome limitations of the previous research, we propose a new rate adaptation scheme called SARA(Sender-oriented Automatic Rate Adaptation). The SARA scheme, a proposed rate adaptation scheme, appropriately adjusts the data transmission rate based on the estimated wireless channel conditions, specifically the measured RSSI at the sender-side. Moreover it continuously updates the thresholds for selecting the transmission rate and selectively enforces the RTS/CTS exchanges to adapt the changes in the wireless channel conditions. Through the performance evaluations, we prove that the SARA scheme overcomes the limitations of the previous research and improves the wireless link utilization.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.305-305
• /
• 2010

태양전지의 개발이 본격화 되면서 태양전지 웨이퍼 표면에서의 재결합에 의한 손실을 줄이고 전면에서의 반사도를 감소시키기 위한 ARC (Anti-reflection Coating) layer에 대한 연구가 활발히 진행되고 있다. 이 중 대표적인 물질이 실리콘 질화막이 있다. 실리콘 질화막은 PECVD(plasma-enhanced chemical vapor deposition)법으로 저온에서 실리콘 기판 위에 증착 가능한 장점이 있다. 또한 실리콘 질화막의 광학적, 전기적인 특성은 $SiH_4:NH_3$의 화학적 조성비에 의해 결정되며 가스비 가변에 따라 균일도 및 굴절률 조절을 가능케 하여 태양전지의 효율을 향상시킬 수 있다. 본 연구에서는 태양전지의 표면 반사도 저감 및 효율 향상에 최적화된 실리콘 질화막을 형성하기 위해 PECVD를 이용하였고, 가스비 가변을 통해 굴절률을 조절하여 실리콘 질화막을 증착하고 이를 이용한 태양전지를 제작한 후 특성을 비교, 분석하였다. 실리콘 질화막 증착을 위해 압력, 온도, 파워를 1Torr, $450^{\circ}C$, 300W로 고정하고 가스비는 $SiH_4$를 45 sccm으로 고정한 후 $NH_3$의 양을 각각 30, 60, 90, 120 sccm으로 가변하였다. $SiH_4:NH_3$ 비율이 45:90일 때 박막의 passivation효과가 최대였으며 이 조건로 ARC를 형성한 태양전지는 77% 후반의 높은 FF(Fill Factor)와 17%의 광 변환 효율을 나타냈다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.506-512
• /
• 2017

The purpose of this study was to improve release rate and bioavailability of nateglinide formulation. Polymorphism selection and particle size control were performed to enhance formulation dissolution rate, and a pH modifier was included in the formulation to overcome pH-dependent solubility of nateglinide. The enhanced dissolution rate was characterized by using a dissolution test. The results showed that H-type raw material had a higher dissolution rate than that of B-type raw material. There was 6.2% difference in dissolution between the two materials at 60 min. With regard to particle size, raw material with a $1.13{\mu}m$ particle size showed a 20% faster release rate than that of raw material with a $2.28{\mu}m$ particle size. Furthermore, fumaric acid was included in formulation as a pH modifier. That addition produced a greater than 50% improvement in dissolution rate. In conclusion, dissolution rate of nateglinide can be enhanced by optimizing its polymorphism and particle size; moreover, a synergistic effect on the enhancement of dissolution rate is obtained by including fumaric acid, a pH modifier, in the formulation.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.2
• /
• pp.95-111
• /
• 2023

Korea has achieved a high startup rate by promoting government-led startup policies for national economic and industrial development. However, as high as the startup rate is, the closure rate of startup companies can be judged to be insufficient for the qualitative growth of the domestic startup ecosystem. This study aims to investigate how to improve the survival rate of startups by overcoming the valley of death from a location environment perspective. It analyzes the effects of technology orientation and market orientation of start-ups on management performance and the moderating effects of economic, accessibility, and network factors that constitute the location environment. To achieve the research objectives, the empirical analysis was conducted on start-up companies that received corporate support projects from innovation intermediary organizations. The results show that R&D capability of technology orientation has a significant effect on management performance, and market information generation and market information response of market orientation have a significant effect on management performance. As for the moderating effect, accessibility, a sub-factor of the location environment, has a positive moderating effect on the relationship between technological innovation and managerial performance, and the location environment (economy, accessibility, and network) has a positive moderating effect on the relationship between market information generation and managerial performance. This study compared and analyzed previous studies on the success and failure of start-ups and identified common factors. In addition, this study provides policy implications for the sustainable growth of startups through empirical analysis and interview with stakeholders. For future research, it is necessary to compare and analyze start-ups in metropolitan areas and non-metropolitan areas. In addition, it is necessary to study startups that have moved out of the region and into the metropolitan area to find ways to develop the regional startup ecosystem.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.5 no.1
• /
• pp.50-59
• /
• 2012

In the domain of orthopaedic surgery, application of regional nerve block for surgery or pain control in upper and lower extremities has been increased. By performing regional block of popliteal (sciatic), femoral, proximal saphenous nerve and ankle block under guidance of ultrasound, not only the safety, but also success rate of the procedure has increased, and amount of local anesthetics could be used less, too. Since the perineural single injection or continuous catheterization of diluted local anesthetics was performed more precisely and easily by the guidance of ultrasound, postoperative pain could be controlled without complications of PCA such as nausea, vomiting, etc. We will discuss about this ultrasound guided regional nerve block.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1582-1588
• /
• 2007

According to recently presented QoS architecture by 3GPP, a traffic conditioner may be deployed to provide conformance of the negotiated QoS. In this paper, a real-time frame-layer rate control method which can be applied to the traffic conditioner of 3GPP is proposed. The proposed rate control method uses an efficient frame skipping algorithm method for low computational complexity, and performs bit allocation at the frame level to minimize the average distortion over an entire sequence as well as variations in distortion between frames. The proposed algorithm does not produce time delay from encoding, and is suitable for real-time low-complexity video encoder.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.349-356
• /
• 2020

The heat release rate (HRR) and fire growth rate of fire for the solid combustibles consisting of multi-materials was measured through the ISO 9705 room corner test, and the computational analysis in a closed compartment was performed to simulate a fire using the heat release rate prediction model provided by a Fire Dynamics Simulator (FDS). The method of predicting the heat release rate provided by the FDS was divided into a simple model and a pyrolysis model. Each model was applied and computational analysis was performed under the same conditions. As the solid combustible consisting of multi-materials, a cinema chair composed mostly of PU foam, PP, and steel was selected. The simple model was over-predicted compared to the predicted heat release rate and fire growth rate using the pyrolysis model in a closed compartment.

• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.583-588
• /
• 2003

Cation exchange capacity of clay, white clay and zeolite was measured by the adsorption test for 3 different heavy metal (Cd, Cr, Zn) standard solutions whose concentrations were varied by 10, 20, 30 ppm and pH were varied by 3, 5, 7, 9, respectively. The adsorption rate of Cd and Zn increased with increasing pH and slowly increased with increasing pH above pH 5. However, adsorption rate of Cr did not increase with increasing pH. Especially, Cr adsorption rate of the mixture of clay and white clay at pH 5 showed an half decrease compared to that at pH 3. The adsorption rate of mixed heavy metal solutions was in the order of Cd, Zn > Cr; however, the order was changed by Fe>Pb, Cu>Cr>Zn>Cd in case of Cu, Fe and Pb addition.

• Journal of the Korean Vacuum Society
• /
• v.6 no.4
• /
• pp.298-307
• /
• 1997

TDS(Thermal Desorption Spectroscopy)system, for diagnosis of CRT manufacturing process, was designed and constructed. Outgassings and thermal desorptions from the part or materials of CRT can be measured and analysed with this system at various temperatures. The system is consisted of 3 parts, vacuum chamber and pumping system with variable conductance, sample heating stages & their controller, and outgassing measurement devices, like as ion gauge or quadrupole mass spectrometer. The ultimate pressure of the system was under $1{\times}10^{-7}$ Pa. With the variable conductance system, the effective pumping speed of the chamber could be controlled from sub l/s to 100 l/s. The effective pumping speed values were determined by dynamic flow measurement principle. The temperatures and ramp rate of sample were controlled by tungsten heater and PID controller up to 600℃ within ±1℃ difference to setting value. Ion gauge & QMS were calibrated for quantitative measurements. Some examples of TDS measurement data and application on the CRT process analysis were shown.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.6
• /
• pp.704-709
• /
• 1996

This experiment was carried out to establish the system of mass propagation through tissue culture using sucker and stem in Ramie. The sterilization for tissue culture of Ramie was the better treatment of 2% NaClO for 20 minute into ultrasonic cleaner than the others, and so rate of contamination was 3.3%, and it was able to produce 96% healthy plant. The effect of growth regulator was superior to mixed treatment of 0.02mg/$\ell$ NAA, 1.5mg/$\ell$ BA, 0.lmgmg/$\ell$ GA$_3$, which it was not formed callus and but produced 96% healthy plant. The effect of propagation was higher in culturing of the stem node than the sucker in cultural part, local variety than improved ones. The effect of acclimatization was superior to pretreatment of 30 minute after soaking in 100ppm NAA, transplanting on bed soil which mixed to ratio of vermiculite : soil : sand =1 : 2 : 1, the transplanted plants were grown all normal.