• Journal of Ocean Engineering and Technology
• /
• v.33 no.2
• /
• pp.131-138
• /
• 2019

This study focused on the roll motion characteristics of a two-dimensional (2D) rectangular floating structure under regular beam sea conditions. An experiment was conducted in a 2D wave tank for a roll free decay test in calm water and the roll motion in a range of regular waves with and without heave motion to investigate the motion response and heave influence on the roll motion. A numerical study was carried out using Reynolds-averaged Navier Stokes (RANS)-based CFD simulations. A grid convergence test was conducted to accurately capture the wave condition on the free surface based on the overset mesh and wave forcing method. It was found in the roll free decay test that the numerical results agreed well with the experimental results for the natural roll period and roll damping coefficient. It was also observed that the heave motion had an impact on the roll motion, and the responses of the heave and roll motion from the CFD simulations were in reasonable agreement with those from the experiment.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.545-547
• /
• 2013

해양플랜트 서비스 산업은 고상장 산업임에도 불구하고 국내기업의 진출은 거의 전무한 상태이다. 해양플랜트 수요는 고유가와 심해유전 개발의 확대로 산업 시장성은 충분하고 석유 가스 개발이외에도 방대한 해양자원 개발에 필수적이다. 해양플랜트 서비스 산업은 진입장벽이 매우 높은 산업이며 진출을 위해선 인력양성이 필수적이다. 또한 서비스 산업은 고수익 업종으로 선원 및 조선산업 유휴인력과 조선해야공학 전공자에게 고급 일자리 기회를 제공할 수 있다. 이에 본 원고에서는 우리나라 해양플랜트 서비스산업 현황과 전문인력 양성방안에 대해 제시하고자 한다.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.1
• /
• pp.92-97
• /
• 2019

The sea is stratified with water that has different densities because of pressure, temperature, and salinity. When conducting studies of internal waves in the ocean, the fluid is assumed to have layers that have discrete densities. This assumption is made because it is difficult to achieve layers that exhibit gradual changes in the density of the water. In this study, we used previous studies on ocean waves and their radiation issues in the density layer fluid to investigate the characteristics of internal waves in the ocean and their radiation patterns induced by a moving body in a stratified fluid. We also studied the difference in wave radiation between the density gradient layer and the discrete density layer. We found that the wave radiation patterns depended on the velocity of the moving body and the change in the density of the water. The crest apex shift phenomenon was observed in the density gradient in the layer of fluid.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.1
• /
• pp.49-57
• /
• 2021

In the production power transmitting of a floating production system like a wind offshore floating, the power cable should be connected from the surface system into the subsea system. The connection between the surface and the subsea system will make the power cable get a dynamic load like current and wave forces. Based on this condition, a dynamic power cable is required to endure external physical force and vibration in the long-term condition. It needs more requirements than static power cable for mechanical fatigue properties to prevent failures during operations in marine environments where the external and internal loads work continuously. As a process to verify, the durability test of dynamic power cables under the marine operation environment condition was carried out by using domestic technology development.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.5
• /
• pp.287-296
• /
• 2020

The present study aims to improve the accuracy of the maneuvering simulations based on captive model test results. To derive the hydrodynamic coefficients in a self-propelled condition, a mathematical maneuvering model using a whole vehicle model was established. Captive model tests were carried out using the Vertical Planar Motion Mechanism (VPMM) equipment. A motor controller was used to control the constant propeller revolution rate during pure motion tests. The resistance tests, self-propulsion tests, static drift tests, and VPMM tests were performed in the towing tank of Seoul National University. When the vertical drift angle changes, the gravity load on the sensors were changed. The hydrodynamic forces were deduced by subtracting the gravity load from the measured forces. The hydrodynamic coefficients were calculated using the least-square method. The simulation of the turning circle test was compared with the free-running model test result, and the error of the turning radius was 8.3 % compared to the free-running model test.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.6
• /
• pp.400-412
• /
• 2022

This paper provides the results of numerical and theoretical predictions of oil outflows from damaged single-hull and double-hull ships.Theoretical equations derived from the unsteady Bernoulli equation and a CFD method for multi-phase flow analysis were used to estimate the oil outflow rate from cargo tank. The predicted oil outflow rate from a single-hull cargo tank damaged due to grounding and collision accidents showed a good agreement with the available experimental results in both numerical and theoretical analyses. However, in the case of the double-hull conditions, the time variation of the amount of water and oil mixture inside the ballast tank predicted by the theoretical equation showed some different behavior from the numerical results. The reason was that the interaction of the oil flow with the water inflow in the ballast tank was not reflected in the theoretical equations. In the problems of the initial pressure condition in the cargo and ballast tanks, the oil outflow and water inflow were delayed at the pressure condition that the tanks were sealed. When the flow interaction between the oil and water in the ballast tank was less complicated, the theoretical and the numerical results showed a good agreement with each other.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.6
• /
• pp.345-354
• /
• 2022

It is easy for a ship passing through confined waters to be exposed in dangers of collisions and grounding due to different hydrodynamic responses. Since marine accidents can cause significant impacts on environments, global economy, and human lives, it is necessary to study the effect of shallow water on hydrodynamic performance of a ship. In this paper, the effect of water depth on resistance performance was investigated using CFD analysis as an initial study for improving navigational safety of a large container ship under confined waters. After a CFD set-up for deep water condition was validated and verified by comparing CFD analysis with model test results, CFD calculations according to ship speed and water depth were conducted. The features were investigated in terms of tendency and physical knowledge related to resistance performance. The increase of resistance due to shallow water effect was reviewed with empirical formula suggested from SWABE JIP. Speed loss due to shallow water effect was additionally reviewed from estimated delivered power according to ship speed and water depth.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.35-46
• /
• 2023

A model test is performed to measure the sloshing impact pressure in the liquid tank. A preprocessing is performed to learn the model test results applied with various environmental conditions. In this study, we propose a method for generating data similar to the total pressure data using Generative Adversarial Networks. In addition, after approximating the generated result to the three parameter Weibull distribution, the difference of the three parameters was compared through the RMSE and SMAPE calculation results. As a result, the distribution of the generated data showed similar results to the total pressure data distribution.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.80-82
• /
• 1991

• Bulletin of the Society of Naval Architects of Korea
• /
• v.39 no.2
• /
• pp.56-66
• /
• 2002