• Title/Summary/Keyword: 조석모델

Search Result 242, Processing Time 0.029 seconds

동지나해의 세격자망 3차원 모델

  • 최병호
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 1987.07a
    • /
    • pp.261-261
    • /
    • 1987
  • 황해의 조석 역학을 포함한 중규모 순환을 연구하기 위해 수립되었던 황해 조석 모델(최, 1980 ; 최, 1984)을 세격자체계로서 개선하였다. 과거 기본모델의 위도 1/5도, 경도 1/4도의 해상도(약 12 해리)는 본 모델에 의해 위도 1/15도, 경도 1/12도의 세격자체계로서 육붕 전역을 자세히 해상시켰다. 모델은 일차적으로 주태음반일주조에 의한 황해의 평균 조석 상황을 재현시키는데 이용되었으며 산정된 조류의 검증은 86년 동계의 해양관측중 해류관측결과(미국 Florida 주립대 - 성균관대 협력연구)로서 수행하였다. 계산 결과에 의하면 과거 모델보다 높은 해상력에 의해 연안에서의 조석 파급 효과가 개선되게 산정되었으므로 연안 해양학적인 각종 응용에 더 나은 입력 및 해석에 이용될 수 있다. 계산 시간간격은 69.00333초로서 1태음조석 주기당 648 timestep 을 형성하였는데 매 조석주기당 약 80 C.P.U.(분)이었으며 7번째 조석주기의 산정 결과를 분석하는데 이용하였다. 본 연구는 기보고된 세계 여타 해역의 육붕모델보다도 자세한 해상도를 갖는 3차원 모델의 결과로서 여겨진다. 아마도 육붕단의 조석 관측이 모델 개선을 위해 필수적인 사항으로 대두되는데 이는 조석 입력(예: 구주 서측 deamphidromic zone)의 중요성이 판별되었기 때문이다. 모델을 이용한 추후의 연구는 극한 상황의 3차원적 해류 분포, 대륙붕 해저 경계층 연구를 포함하는 퇴적 역학 연구 등이 될 것이다.

  • PDF

The analysis of the tide and drift correction models for precise gravity surveying (정밀 중력측정을 위한 조석 및 계기 보정 모델 분석)

  • Lee, Ji-Sun;Kwon, Jay-Hyoun
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.28 no.5
    • /
    • pp.523-530
    • /
    • 2010
  • Recently more gravity data is being obtained due to the increased demands from the fields of geodesy, geophysics, and military. In general, the observed gravity values are corrected for the effect of tide, instrument drift, and instrument height to generate the absolute gravity values at a point. Until yet, the models for tide and drift corrections and those procedures are not determined in Korea which led to the inconsistent data processing for different data sets. Therefore, in this study, the models for tide and drift are analyzed to select the appropriate models. Based on the analysis, it was found that there is not much difference between Longman and Tamura tide models for celestial objects. Earth tide, however, should be considered in tide correction procedure. In drift corrections, the difference between the model considering only the common points and that considering all points appears significantly large up to 0.04mGal. In this case, the model with all points should be used as it the correct one according to the adjustment theory and it generates estimates with better precision.

Calibration and Verification of a Hydrodynamic Model in Chunsu Bay and Adjacent Coastal Water (천수만과 인근연안에서 수역학모델의 보정 및 검증)

  • Kyeong Park;Jeong Hwan Oh
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.10 no.3
    • /
    • pp.109-119
    • /
    • 1998
  • A horizontal tow-dimensional version of POM (Princeton Ocean Model) was modified in representing the bottom friction and the open boundary conditions. To simulate the flooding and drying of intertidal flats, a wetting-and-drying scheme was incorporated into the model. The model then was applied to the Chunsu Bay and its adjacent coastal water. Only the water movement due to tides, the dominant forcing in the study area, was considered. This presents the procedure and the results of model calibration and verification for the Chunsu Bay system. The model was calibrated, using the average tidal characteristics in Tide Tables, for the amplitudes and the phases of tidal waves throughout the modeling domain. Calibration results showed that the model gave a good reproduction of tidal waves. The calibrated model was verified using the time-series measurements of surface elevation and current velocity in the summer of 1995. The model reproduced the tides currents very well. calibration and verification results demonstrated that the model is capable of reproducing the tidal dynamics in the Chunsu Bay system.

  • PDF

Ocean Tide Loading Effect Prediction using GPS in Coastal Area of Korea Peninsula (GPS를 이용한 한반도 연안의 해양조석 부하영향의 추정)

  • 윤홍식;이동하;조재명;황학
    • Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
    • /
    • 2004.11a
    • /
    • pp.33-40
    • /
    • 2004
  • 본 논문에서는 해양조석의 부하효과가 매우 큰 것으로 알려져 있는 우리나라의 서해안을 비롯하여 연안에 설치된 GPS 상시관측소(제주도, 호미곶, 주문진, 마라도, 팔미도, 울릉도, 영도) 데이터를 사용하여 각 관측소의 해양조석의 부하영향으로 인한 지각의 연직변동량을 계산하였다. 총 12개의 해양조석 부하성분의 결과와 실제 해양조석값을 이용한 회귀분석을 통해 실제 해양조석에 대한 한반도 연안의 해양조석 부하영향을 추정하였다. 그 후 이들을 일본과 우리나라 주변에 대하여 지역적으로 개량한 해양조석모델(NAO99jb)로부터 계산된 결과들과 비교ㆍ분석을 실시하여, 지역적인 해양조석 모델의 개발가능성을 검토하였다.

  • PDF

Regional Realtime Ocean Tide and Storm-surge Simulation for the South China Sea (남중국해 지역 실시간 해양 조석 및 폭풍해일 시뮬레이션)

  • Kim, Kyeong Ok;Choi, Byung Ho;Lee, Han Soo;Yuk, Jin-Hee
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.30 no.2
    • /
    • pp.69-83
    • /
    • 2018
  • The South China Sea (SCS) is a typical marginal sea characterized with the deep basin, shelf break, shallow shelf, many straits, and complex bathymetry. This study investigated the tidal characteristics and propagation, and reproduced typhoon-induced storm surge in this region using the regional real-time tide-surge model, which was based on the unstructured grid, resolving in detail the region of interest and forced by tide at the open boundary and by wind and air pressure at the surface. Typhoon Haiyan, which occurred in 2013 and caused great damage in the Philippines, was chosen as a case study to simulate typhoon's impact. Amplitudes and phases of four major constituents were reproduced reasonably in general, and the tidal distributions of four constituents were similar to the previous studies. The modelled tide seemed to be within the acceptable levels, considering it was difficult to reproduce the tide in this region based on the previous studies. The free oscillation experiment results described well the feature of tide that the diurnal tide is prevailing in the SCS. The tidal residual current and total energy dissipation were discussed to understand the tidal and sedimentary environments. The storm-surge caused by typhoon Haiyan was reasonably simulated using this modeling system. This study established the regional real-time barotropic tide/water level prediction system for the South China Sea including the seas around the Philippines through the validation of the model and the understanding of tidal characteristics.

Tidal Variation of Waves in Kyung-Gi Bay (경기만 조석조건에서의 파랑변이)

  • 김지웅
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.12 no.2
    • /
    • pp.87-95
    • /
    • 2000
  • Spectral wave models are applied to the area of Kyung-gi bay with two different combinations. One combination assumes a constant tidal elevation over the whole region when applying the wave model to the area. In this case no tidal currents exist in any place. The other combination employs tide model as well as wave model so that tidal condition is defined at every computation time when wave modelling is carried out. Significant wave heights and wave directions are shown for these two cases. With these two different constraints of tidal variation, the results are checked and compared with each other. Both results are found significantly different from each other.

  • PDF

A new numerical algorithm of tsunami models for considering tide-tsunami interaction (조석-지진해일 상호작용을 고려한 지진해일 예측 알고리즘)

  • Yoon, Jae Seon;Ha, Taemin
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.104-104
    • /
    • 2021
  • 연안에 발생하는 지진해일은 많은 인명 및 재산 피해를 유발할 수 있다. 이에 따라 주요 선진국은 자국의 피해 뿐 아니라 세계 주요도시에 거주하는 자국민의 안전과 대피에 대한 경보발령을 목적으로 전지구 지진해일 시스템을 구축하여 상시 운영중에 있다. 우리나라의 지진해일 예측시스템은 지진해일의 발생과 전파, 그리고 전세계 주요 연안에 도달할 때의 해일고 모의 등에서 우수한 성과를 보이는 것으로 인정되고 있으나, 실제적인 위험경보를 발령하기 위해서 필요한 해일도달 시 조위와의 상호작용에 대한 기능은 현재 없는 상태이다. 해일에 의한 주된 피해는 연안으로의 범람에 대한 것으로 이를 파악하기 위해서는 해일 도달 당시의 조위를 예측하고 해일과 조석과의 상호작용을 반영한 예측시스템 구축이 필요하다. 이에 따라 본 연구에서는 현재 사용되고 있는 지진해일 예측모델에서 조석-지진해일 상호작용을 고려하기 위해 조석과 지진해일을 동시에 모의할 수 있는 예측 알고리즘을 제시한다. 지진해일의 전파 및 범람에 조석이 상당한 영향을 미칠 수 있음은 관련 연구자들에 의해 꾸준히 지적되어왔으나 과거 연구는 이상적인 지형이나 조석 조건에 대해서만 일부 이루어졌으며, 아직까지 실제 조석을 활용한 충분한 연구는 미흡한 실정이다. 향후 실제 조석에 의한 지진해일의 변화를 모의하기 위해 지진해일 예측모델에서 실제 조석과 조류 조건에서 지진해일을 동시에 모의할 수 있도록 예측 알고리즘을 개발하였다.

  • PDF

Estimation of Optimal Weight in Tidal Modeling with the Adjoint Method (조석 모델링에서 adjoint 방법 적용시 적정 가중치 산정)

  • Lee, Jae-Hak;Park, Kyeong;Song, Yong-Sik
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.5 no.3
    • /
    • pp.177-185
    • /
    • 2000
  • The adjoint method is a method of data assimilation to improve the model results by seeking for model parameters that minimize the cost function and satisfy the governing equations of a model simultaneously. An adjoint package was set up for the two-dimensional linear tidal model and was applied to an idealized domain for an optimal estimation of the open boundary conditions. The assimilating data were selected from the results of forward modeling. Attention is paid on the response of the adjoint package to weighting parameters, the importance of initial estimates of model parameters and the applicability of the adjoint package to the case with varying depth. A procedure to determine optimal weight is presented based on the relationships between weights and other factors.

  • PDF

Development of the Combined Typhoon Surge-Tide-Wave Numerical Model Applicable to Shallow Water 1. Validation of the Hydrodynamic Part of the Model (천해에 적용가능한 태풍 해일-조석-파랑 수치모델 개발 1. 해수유동 모델의 정확성 검토)

  • Chun, Je-Ho;Ahn, Kyung-Mo;Yoon, Jong-Tae
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.21 no.1
    • /
    • pp.63-78
    • /
    • 2009
  • This paper presents the development of dynamically combined Typhoon generated surge-tide-wave numerical model which is applicable to shallow water. The newly developed model is based on both POM (Princeton Ocean Model) for the surge and tide and WAM (WAve Model) for wind-generated waves, but is modified to be applicable to shallow water. In this paper which is the first paper of the two in a sequence, we verified the accuracy and numerical stability of the hydrodynamic part of the model which is responsible for the simulation of Typhoon generated surge and tide. In order to improve the accuracy and numerical stability of the combined model, we modified algorithms responsible for turbulent modeling as well as vertical velocity computation routine of POM. Verification of the model performance had been conducted by comparing numerical simulation results with analytic solutions as well as data obtained from field measurement. The modified POM is shown to be more accurate and numerically stable compare to the existing POM.

Storm Surge Inundation Modelling Considering Interactions among Surge-Tide-Riverine Flow (해일-조석-하천 상호작용을 고려한 폭풍해일범람 모델링)

  • Lee, Chilwoo;Son, Sangyoung
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.147-147
    • /
    • 2017
  • 본 연구에서는 2003년 태풍 'MAEMI'에 의해 피해를 가장 많이 입은 경남 마산시를 중심으로 폭풍해일 범람도를 작성하였다. 해양과 하천 하류부가 만나는 마산시에서는 해일, 조석, 하천을 동시에 고려해야 하므로 이에 대한 단계적 적용을 통해 범람 중첩효과를 검토하였다. 본 연구에 사용된 수치모델은 네덜란드 Deltares사에서 개발한 준3차원 해수유동 모델 Delft3D이다. Delft3D는 폭풍해일 이외 지진해일, 부유물 이송, 오염물 확산 등 다양한 분야에 적용 가능하며, 파랑, 조석력, 바람에 의한 전단력, 온도, 염도에 의한 밀도류, 대기압 변화, 조간대 모의 등 다양한 영향을 고려할 수 있다. 수치모의시 모델의 안정성과 효율성을 높이기 위해 다중격자기법을 사용(최소 25m 격자)하였으며, 수심 자료는 국토지리정보원 수치지도와 국립해양조사원 수치해도의 수평 수직적 통합을 통해 구성하였다. 태풍 'MAEMI'의 Best Track은 기상청에서 제공하는 3시간 간격의 중심기압, 풍속, 중심위치를 Holland's Model에 적용하여 계산하였다. 조석효과를 고려하기 위해 개방경계에서 TPXO 7.2를 사용한 분조값을 입력하였다. 또한 하천의 흐름을 효과적으로 구현하기 위해 하천 단면에서의 동적 수위경계조건(또는 유량경계조건)을 추가적으로 부여하였다. 수치해석결과, 마산 수위 관측소에서 관측된 태풍 'MAEMI'의 해일고와 유사한 결과가 산출되었다. 범람역 해석결과는 해일, 조석, 하천을 동시적으로 고려하였을 경우에 실제 침수흔적도인 마산시재해침수지도와 가장 유사한 결과를 보였다.

  • PDF