• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.5
• /
• pp.457-466
• /
• 2007

The effect of depth correction in the coastal sea has been investigated through a series of tide simulations in the area of $115{\sim}150^{\circ}E,\;20{\sim}52^{\circ}N$ of northwestern Pacific with $1/12^{\circ}$ resolution. Comparison of the solutions varying the minimum depth from 10m to 35 m with the 5m interval shows that the amplitude accuracies of $M_2,\;S_2,\;K_1$ tide using the minimum depth of 25 m have been improved up to 42%, 32%, 26%, respectively, comparing to those using the minimum depth of 10m. The discrepancy between model results using different minimum depth is found to be up to 20 cm for $M_2$ tidal amplitude around Cheju Islands and the positions of amphidromes are dramatically changed in the Bohai Sea. The calculated ARE(Averaged Relative Error) values have been minimized when the bottom frictional coefficient and the minimum depth is 0.0015 and 25 m, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1B
• /
• pp.33-40
• /
• 2010

In this study, a two-dimensional hydrodynamic and sediment transport modeling system, HSCTM-2D is employed to simulate the amounts of long-term cohesive sediment deposition in two study bays, and its applicability is evaluated. The modeling system's two modules for hydrodynamic modeling and sediment transport modeling are calibrated, comparing the simulated results and the observed tidal levels, tidal current velocities, and suspended sediment concentrations in the Asan and the Cheonsu Bays, South Korea. It is found that there are good agreements between the simulation results and the observed values. The amounts of long-term cohesive sediment deposition of the two study bays are estimated using the modeling system, taking the suspended sediment concentrations from the open ocean in the tide-dominated environment into account. And, in the case of the Asan Bay, the annual deposition rate reaches 8.1 cm/yr; the Cheonsu Bay, 14.5 cm/yr. Overall, it is concluded that the modeling system is useful to understand the physical process of cohesive suspended sediment transport and deposition in tidal water bodies and to establish the mitigation strategy.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.3
• /
• pp.177-185
• /
• 2000

The adjoint method is a method of data assimilation to improve the model results by seeking for model parameters that minimize the cost function and satisfy the governing equations of a model simultaneously. An adjoint package was set up for the two-dimensional linear tidal model and was applied to an idealized domain for an optimal estimation of the open boundary conditions. The assimilating data were selected from the results of forward modeling. Attention is paid on the response of the adjoint package to weighting parameters, the importance of initial estimates of model parameters and the applicability of the adjoint package to the case with varying depth. A procedure to determine optimal weight is presented based on the relationships between weights and other factors.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.639-643
• /
• 2007

Tidal regime change with general hydrolic condition change is examined, according to Garolim Tidal Power Plant (TPP) operation. Numerical model has been developed for the Yellow and East China Seas region, in order to consider the tidal regime change by the TPP operation. The changes of tidal elevation and tidal current inside the Garolim bay are also investigated in details, along with examining the change of the tidal flat area with operation. The field measurement for the tide and current have been carried out for the validation of the numerical model and for understanding the state of current system in the present state.

• New & Renewable Energy
• /
• v.3 no.2 s.10
• /
• pp.3-10
• /
• 2007

Tidal regime change with general hydrolic condition change is examined, according to Garolim Tidal Power Plant (TPP) operation. Numerical model has been developed for the Yellow and East China Seas region, in order to consider the tidal regime change by the TPP operation. The changes of tidal elevation and tidal current inside the Garolim bay are also investigated in details, along with examining the change of the tidal flat area with operation. The field measurement for the tide and current have been carried out for the validation of the numerical model and for understanding the state of current system in the present state.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.189-190
• /
• 2018

금회 연구대상인 아산만 내측에 위치한 배수로는 항만 건설로 인하여 인공적으로 생성된 감조하천의 성격을 띄고 있다. 이러한 인위적으로 설정된 배수로는 일반 하천에 비하여 유속이 크고 단순화된 유로로 인하여 퇴적 또는 침식우세 등의 극단적인 성격이 보인다. 따라서 이러한 퇴적환경 현황을 파악하기 위하여 금회 연구에서는 퇴적환경의 외력조건으로 작용하는 조석, 파랑, 그리고 하천 등의 영향을 분석하였으며, 이에 따라 유동 및 퇴적환경 현황을 재현하였다. 재현결과 협수로와 곡선부에서 침식이 기타 수로에서는 퇴적이 우세한 양상을 보이는 것으로 나타났다. 또한 이를 근거하여 차후 1, 5, 10년에 대한 장기간의 모델링을 수행하였으며, 이에 대한 결과 현재 배수로의 퇴적환경은 평형상태로 유지되는 것으로 판단된다. 그러나 배수로로는 대부분 간사지로 대기노출시간의 높은 편으로 지반의 고화현상이 발생하여 이에 대한 고려는 거의 불가하기 때문에 결과 보정 시 이를 고려한 결과해석이 필요할 것으로 판단된다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.143-147
• /
• 2002

본 연구의 목적은 부산 동남부 해안지역의 대수층에서 염수화에 미치는 조건들을 파악하고 해수침투 범위를 추정하는데 있다. 이를 위하여 Tidal damping method와 SUTRA 모델링을 실시하고 대수층의 특성 및 염수화가능성을 파악하였으며, 모델링 결과의 타당성을 판단하기 위하여 전기비저항 탐사를 실시하였다. Tidal damping method에 의한 시간지연과 조석효율효과를 계산하여 대수층의 저류계수를 산출한 결과 시간지연 현상에 의한 방법이 적합하게 나타났다. SUTRA 모델링 결과, 건기인 5월에는 종분산 지수가 2.5m 일 때 500ppm의 TDS 등치선을 기준으로 해안에서 약 510m 내륙까지 해수의 영향을 받고 있는 것으로 나타났다. 그러나 우기인 7월에는 강수로부터 다량의 지하수 함양에 의한 지하수위 상승을 고려하여, 평균수리경사를 0.008로 설정한 조건에서는 500ppm의 TDS 등치선을 기준으로 해안에서 약 410m 내륙까지 해수의 영향을 받는 것으로 나타난다. 5월과 7월의 전기비저항 탐사결과를 비교하면 7월의 전기비저항 분포가 전반적으로 높게 나타났다. 그 이유는 6, 7월의 강수에 의한 지하수의 유입이 증가하여 침투된 염수의 농도가 다소 낮아졌기 때문이다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.366-369
• /
• 2004

조석의 효과가 대수층에 미치는 해안대수층에서 지하수-기표수 상호작용에 관한 모사를 위해 수치모델링을 이용하였다 모사에 사용한 모델은 하천경계와 해안경계가 서로 직교하며 하천은 대수층을 부분 관통하고 있다. 해안경계와 하천경계에 의한 동시영향을 함께 모사한 결과, 해안경계에 의한 효과는 일정한 범위까지만 나타났으나, 하천경계에 의한 영향은 시간의 증가에 따라 영향범위가 넓어졌다. 하천경계와 해안경계조건이 만나는 부근에서는 해안경계에 의한 지하수위의 반복적인 상승과 하강으로 인해 두 경계조건에 의한 지하수위가 상호 상승작용을 일으키기도 하고 상호 상쇄되어 지하수위의 변화가 없는 엉역이 나타나기도 한다. 따라서 이러한 하천과 해안경계조건이 상호 교차하는 주변 대수층에서의 수위를 측정하여 해안대수층에서의 수리상수를 추정하면 수리확산계수를 과대 혹은 과소평가하는 오류를 범할 수 있으므로 주의를 요한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.258-269
• /
• 1999

It is important to evaluate fatigue damage of in-service material in respect to assure safety and remaining fatigue life in structure and mechanical components under cyclic load . Fatigue damage is represented by mathematical modelling with crack growth rate da/dN and cycle ration N/Nf and is detected by X-ray diffraction and ultrasonic wave method etc. But this is estimated generally by single parameter but influenced by many test conditions The characteristics of it indicates fatigue damage has complex fracture mechanism. Therefore, in this study we propose that back-propagation neural networks on the basis of ration of X-ray half-value breath B/Bo, fractal dimension Df and fracture mechanical parameters can construct artificial intelligent networks estimating crack growth rate da/dN and cycle ratio N/Nf without regard to stress amplitude Δ $\sigma$.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.1
• /
• pp.65-74
• /
• 1996

Up to now, the existing crack growth modelling has used a mathematical approximation but an assumed function have a great influence on this method. Especially, crack growth behavior that shows very strong nonlinearity needed complicated function which has difficulty in setting parameter of it. The main characteristics of neural network modelling to engineering field are simple calculations and absence of assumed function. In this paper, after discussing learning and generalization of neural networks, we performed crack growth modelling on the basis of above learning algorithms. J'-da/dt relation predicted by neural networks shows that test condition with unlearned data is simulated well within estimated mean error(5%).