• Journal of the Korean Society of Radiology
• /
• v.11 no.1
• /
• pp.37-42
• /
• 2017

We measured the absorbed dose and the area dose using an ionization chamber type of area dose product (DAP) meter and measured the calibration factor in the X-ray examination. In the indirect dose measurement method, the detector was installed in the radiation part of the X-ray equipment, and the measured value was calculated as the dose at the exposure part. The instrument used to calculate the calibration factor was an X-ray equipment (DK-550R / F, DongKang Medical Co., Ltd., Seoul, Korea). The calibration method for the calibration factor was to connect the DAP meter (PD-8100, Toreck Co. Ltd., Japan) to the calibration dosimeter tube voltage of 70 kV, tube current of 500 mA, 0.158 sec. The reference dosimeter used a semiconductor (DOSIMAX plus A, Scanditronix, $Wellh{\ddot{o}}fer$, Germany). After installing the DAP meter on the front of the multi-collimator of the ionization chamber, the calibration factor of the dosimeter was obtained using the reference dosimeter for accurate dose measurement. Experimental exposure values and values from the calibration dosimeter were calculated by multiplying each calibration factor. The calibration factor was calculated as 1.045. In order to calculate the calibration coefficient according to the tube voltage in the ionization type DAP dosimeter, the absorbed dose and the area dose were calculated and the calibration factor was calculated. The corrective area dose was calculated by calculating the calibration factor of the DAP meter.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.991-999
• /
• 2018

In urban areas, the proportion of railway traffic in public transport is increasing. The congestion situation is repeated as the passengers concentrate on station and transfer facilities and the inconvenience of the passengers is increasing in terms of safety and convenience. Therefore, the importance of estimating the appropriate area of the station has been emphasized. The area estimation formula used in the metropolitan railway stations currently is a partial modification of the area estimation formula of Japan in the 1970s. It does not reflect changes in the social and cultural environment and patterns of passengers. The technical basis for major decision variables is insufficient. Therefore, the theoretical basis of the area estimation formula and the pedestrian environment satisfaction of the design guideline of metropolitan railway stations were analyzed in order to suggest improvement formula. The improved area estimation formula was verified by conducting field surveys on 5 stations of metropolitan railways and 15 stations of urban railways. The existing area estimation formula is LOS E grade for the main space. However, the LOS D grade is implemented when the improved area estimation formula is applied. Based on the results, the design factors for the area estimation formula are suggested.

• Korean Journal of Agricultural Science
• /
• v.10 no.1
• /
• pp.61-73
• /
• 1983

This study was conducted to obtain fundamental informations on the improvement of cropping system to increase in land utilization rate and crop production. In order to group the characteristics of areas, Chungnam province was classified into 4 classes: Suburb (Daedeog Gun, Cheonwon Gun), Plain (Nonsan Gun, Dangjin Gun) Coastal (Seosan Gun, Boryeong Gun) and Hilly region (Gongju Gun, Cheongyang Gun). 100 farm households were sampled from each region, and cropping system and utilization state of paddy and upland in 1982 were surveyed. The results obtained were summarized as follows: 1. Average utilization rate of upland was 161.9 % The utilization rate of upland at plain was highest (188.9 %), and that at suburb showed lowest value (152.0%). 2. Number of crops cultivated at upland was 32 kinds. Among the rate of planting area of each crop. soybean showed highest rate of 18.8%, barley 15.4%, red-pepper 13.1% and chinese' cabbage 10.1% respectively, but the red pepper showed highest rate of planting area at suburb, the barley at hilly region and the soybean at plain and coastal region. 3. Average utilization rate of paddy was 115.6% and the utilization rate of paddy at suburb showed the highest value (140.0%) and that at coastal region the lowest value (108.2%). 4. 12 kinds of crops were cultivated at paddy before or after rice cultivation. Among the crops cultivated at paddy before or after rice cultivation, barley showed the highest area rate (5.0%) of cultivation and strawberry the next but the strawberry showed the highest area rate of cultivation at suburb and barley at other regions. 5. The cropping systems at upland were divided into single cropping and double cropping. Types of double cropping at upland were classified into 38 types by the combinations of crops. Among the types of double cropping, the rate of cultivation area of soybean after barley combination was 35.0%, but at suburb the rate of this type of cropping system was low and the double cropping of vegetable combinations showed high rate. 6. Types of double cropping at paddy were classified into 6 types. As a whole, double cropping of barley after rice combination showed highest rate of cultivation area (42.8%) among crop combinations but at suburb, the area rate of this type cropping was low and cultivation of fruit vegetable after rice showed highest rate. The area rate of post - cropping to rice was 76.3% of whole double cropping area at paddy and significantly higher than the rate of precropping to rice. 7. Some kinds of crop combinations were consisted of same family or closely related crops and the characteristics of the crop rotation between those crops are almost same. The area cultivated those unreasonable crop combinations were 19.09 ha. 8. At upland, planting area of the cereal crops, vegetale crops and industrial crops crops and industrial crops was 88.92ha, 93.70ha and 21.80ha respectively. The Planting area of cereal crops was significantly less than that of vegetable crops. 9. Most of all the research reports on the cropping system from 1910 to 1980 were about the post cropping after rice harvest. The objectives of researches could be classified into 14 kinds and the important objectives of researches were the planting time, the amounting of manuring, the quantity of seeding, the transplanting time, the ridging method, the sowing method and the variety test.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3080-3086
• /
• 2009

We have analyzed the output characteristics of a LGP with pyramid shaped pattern by using a 3-D simulation tool. The influences on the LGP output of various parameters such as the pattern shape, pattern occupation ratio, pattern size, and etching angle were investigated. Comparing the pyramid shaped pattern with hemispherical patterns, little difference was observed. And, it was proved that the pattern occupation ratio and etching angle have relatively large effects on LGP output characteristics, while the pattern size has no effect. Therefore, we can improve the LGP characteristics by optimizing pattern structure and distribution.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.53-53
• /
• 2022

본 연구는 낙동강 상류에 위치한 안동댐 하류(4,565.7 km²)를 대상으로 1차원 물리적 서식처모형인 PHABSIM(Physical Habitat Simulation System)과 2차원 물리적 서식처 모형인 River2D를 이용하여 대표어종인 피라미에 대해 환경생태유량과 어류서식처 면적을 산정하였다. 두 모형의 구축을 위해 낙동강 하천기본계획보고서(2009)를 수집하여 하천단면과 수리학적 자료를 두 서식처모형에 적용하였다. 유속과 수위자료의 경우, 낙동강수문조사연보와 검보정된 HEC-RAS를 활용하여 갈수량 Q355(10.95 m³/sec)와 평수량 Q185(41.72 m³/sec)에서의 유속과 수위를 생성하여 적용하였다. 대표어종 선정을 위해 총 4회에 걸쳐 현장조사를 진행하였으며, 수집한 어종들에 대해 상대풍부도와 출현 개체수 분석결과 54.2%의 상대풍부도와 총 110개의 개체수를 나타낸 피라미(Z acco platypus)를 대표어종으로 선정하였다. 서식처 적합도 지수 HSI(Habitat Suitability Index)는 피라미 출현시기의 수심(Depth), 유속(Velocity) 그리고 하상재료(Substrate)를 조사하여 적립하였으며 수심은 0.4~0.6 m, 유속은 0.3~0.5 m/s, 하상재료는 모래(2.0 mm)~잔자갈(16.0 mm)일 때 HSI가 가장 적합한 것으로 분석되었다. PHABSIM을 이용하여 피라미에 대해 최적 환경생태유량 산정결과 20.0 m³/sec로 산정되었고, 모의한 30개 유량에 대해 평균 어류서식처 면적은31,905.3 m²/1,000m로 산정되었다. PHABSIM으로 산정된 환경생태유량과 River2D를 이용하여 하천유량이 Q355와 환경생태유량일 때의 공간분석을 실시하였다. Q355와 비교하여 환경생태유량일 때 유속과 수심 HSI에 대한 공간분포와 어류서식처 면적 또한 더 큰 것으로 분석되었다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.17-19
• /
• 2002

자외선 조사경화는 자외선조사에 의해 올리고머 등을 광중합/광가교하여 경화시키거나 섬유고분자의 표면을 처리하여 표면성질을 변화시키는 것으로 이를 이용한 섬유의 염색가공은 환경친화성, 에너지 절감, 높은 연속 생산속도, 고 해상도의 패턴 부여가능, 입체적인 구조물의 처리 가능, 장비의 소형화 및 설비면적의 감소 등 우수한 장점을 가지고 있어 차세대 첨단 염색가공기술로서 그 중요성이 부각되고 있다. [l] (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.169-171
• /
• 2008

마이켈슨 간섭계 시스템에 두 개의 Convex Lens를 추가함으로서 평면파 참조광을 유지 시키며, 물체에 조사되는 물체광의 조사면적을 변화시킬 수 있는 새로운 형태의 마이켈슨 간섭계를 제작 하였다. 새로운 형태의 마이켈슨 간섭계를 반사형 디지털 홀로그래피 현미경 시스템(Digital Holography Microscope System)에 적용하여 촬상소자(CCD: Charge Couple Device)에 홀로그램 기록 시 기록 가능한 CCD의 유효 영역과 재생 가능 영역에 대해 연구를 하였다

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.05a
• /
• pp.41-42
• /
• 2001

본 연구에서는 규사채취작업으로 인하여 발생하는 수중소음과 모래 등의 유실이 작업현장 부근에 있는 정치망어장에 미치는 영향에 관한 연구 조사한 결과를 보고하고자 한다. 1. 조사대상 어장의 환경 - 조사대상 정치망어망은 양낙망 형태인 대형 정치망이었고, 경북 울지군 북면 나고리지선(37$^{\circ}$, 08.320' N, 129$^{\circ}$ 22.902' E)에 위치하고 있었으며, 어장면적은 500,000$m^2$, 어획대상어종으로는 대형 회유성 어종인 방어, 고등어, 오징어 외에도 주변해역에서 서식하는 돔, 넙치, 쥐치 및 기타잡어로 하고 있었다. (중략)

• Computational Structural Engineering
• /
• v.5 no.3
• /
• pp.113-118
• /
• 1992

The live loads acting on structures are generally computed in terms of equivalent uniformly distributed loads for the simplicity in design process. The loads, therefore, tend to decrease with increasing influence area in both load intensity and variance. Since multi-story column loads result from accumulation of loadings action on several different floors, its influence area becomes wider and lifetime maximum decreases. In the design codes proposing the design loads according to types of structural members(i.e., slabs, beams, columns), rather than the change of influence area, some proper reduction factors are given for columns which support more than one floor. Using the live load models developed for columns supporting single floor, in this study, the probabilistic characteristics of multi-story column loads are analyzed. In addition reduction factors given for multistory columns in current practice are calibrated.

• Journal of the Korean Magnetics Society
• /
• v.23 no.6
• /
• pp.188-192
• /
• 2013

The magnetic interaction effect on the magnetic activation volume and area of electrodeposited CoPt magnetic films was investigated. The dipolar interaction was predominant interaction mechanism for all samples. And the interaction strength was increased with decreasing current density and increased with increasing sample thickness. Although the activation volumes of the samples fabricated at low current density were larger than those of the high current density samples, the sample thickness seemed to have little influence on the variation of activation volume. But it was found that the activation area was apparently affected by the magnetic interaction strength as well as the current density.