• 한국건설관리학회논문집
• /
• 제23권5호
• /
• pp.43-55
• /
• 2022

조립 가설기자재는 본 공사가 시작되기 전 반드시 수행되는 가설공사에 널리 사용되기 때문에, 조립 시 품질확보와 설치 후 운영 시 조립 가설기자재로 인해 발생 가능한 안전사고 예방이 필수적이다. 그러나 현재 대부분의 건설현장 관리자는 조립 가설기자재의 품질관리를 본 공사를 위해 설치 후 해체하는 임시구조물을 관리하는 업무로 인식하고 있는 등 그 중요성을 인지하지 못하고 있는 것으로 조사되었다. 현재 건설현장에서의 조립 가설기자재의 품질관리 업무는 정형화된 절차가 부재하고 이를 수행하는 주체가 불분명하여 건설현장별로 상이한 업무방식에 의해 수행되고 있으며, 설치작업 시 종합건설업체 관리자는 임의의 판단에 의해 점검이 필요한 부분에 대해서만 점검하고 이에 대한 조치사항을 증거자료 없이 전달 및 반영하기 때문에 투명성이 보장되지 못하여 그 결과가 중대재해로 이어지는 문제가 발생하고 있어 이에 대한 개선이 시급한 것으로 분석되었다. 따라서 본 연구에서는 건설현장 내 이해관계자가 조립 가설기자재의 품질확보를 위한 체계적인 품질평가 및 관리 절차를 제공하고, 품질평가 및 관리 업무를 위한 체크리스트를 개발하여 이에 대해 웹(Web)상에서 이력관리를 지원하는 문서 작성 중심의 시스템을 구축하는 데 목적이 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.25-26
• /
• 2021

System scaffolding and shoring are temporary structures in which vertical members, horizontal members, bracing members and trusses are assembled and installed. In order to ensure quality and safety, the quality test shall be carried out in accordance with the Guidelines for Quality Management of Construction Works (MOLIT Notice No. 2020-750). The quality test method (national standard) for Components for tied post system scaffolding and shoring is based on the Korean standards (KS F 8021) and the Safety certification standards (MOEL Notice No. 2021-22). However, the two standards differ in some aspects such as performance standards and etc, so cause confusion when applying them on-site. In addition, the standard for truss are applied only to trusses for shoring and cannot be applied to trusses for scaffolding. Therefore, this study aims to unify the two national standards and establish realistic standards.

• 한국안전학회지
• /
• 제35권3호
• /
• pp.32-42
• /
• 2020

In this study, in order to secure the necessity of introducing the safety certification system for the assembled temporary equipment and materials, the feasibility of the introduction was analyzed through literature review, structural analysis, and actual experiments and surveys related to the assembled temporary equipment and materials. In the previous studies, it was found that the research on the assembled temporary equipment and materials was insufficient, and it was possible to grasp the necessity of introducing the safety certification system for the assembled temporary equipment and materials. In addition, in the results of the serious accident analysis, it was found that the soundness of the temporary equipment and materials is determined by the structural characteristics after it was assembled. As a result of the feasibility analysis of the introduction of the safety certification of the assembled temporary equipment and materials through structural analysis, it is possible to effectively and rationally reflect the main geometrical influence factors, and to introduce the safety certification system that can test the procedures and procedures of the assembled temporary equipment and materials and based on it. It was found that there is a need. As a result of feasibility analysis on the necessity of introducing the safety certification system for assembled temporary equipment and materials through actual experiments, the existing single member performance evaluation has limitations in evaluating the structural performance of the assembled temporary equipment and materials. It was found that there is a need to introduce a safety certification system. As a result of gathering opinions on the feasibility of introducing the safety certification system for assembled temporary equipment and materials of manufacturers and users through the survey, it was found that the overall positive response result was high and the effectiveness was high.