Korean Journal of Construction Engineering and Management (한국건설관리학회논문집)

Korea Institute of Construction Engineering and Management (한국건설관리학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Quality Evaluation and Management System for Assembled Temporary Equipment - Focused on Steel Pipe Scaffolding, System Scaffolding and Support -

조립 가설기자재 품질평가 및 관리 시스템 개발 - 강관 비계, 시스템 비계, 시스템 동바리를 중심으로 -

  • Jang, Ji young (Department of Architectural Engineering, Inha University) ;
  • Lee, Ji yeon (Department of Architectural Engineering, Inha University) ;
  • Kim, Ha yoon (Department of Architectural Engineering, Inha University) ;
  • Lee, Jun ho (Department of Architectural Engineering, Inha University) ;
  • Kim, Jun-Sang (Department of Architectural Engineering, Inha University) ;
  • Kim, Jung-Yeol (Department of Architectural Engineering, Inha University) ;
  • Kim, Young Suk (Department of Architectural Engineering, Inha University)
  • 장지영 (인하대학교 건축공학과) ;
  • 이지연 (인하대학교 건축공학과) ;
  • 김하윤 (인하대학교 건축공학과) ;
  • 이준호 (인하대학교 건축공학과) ;
  • 김준상 (인하대학교 건축공학과) ;
  • 김정렬 (인하대학교 건축공학과) ;
  • 김영석 (인하대학교 건축공학과)
  • Received : 2022.07.06
  • Accepted : 2022.07.25
  • Published : 2022.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Since assembled temporary equipment is widely used for construction work that should be carried out before this construction begins, it is essential to secure quality during assembly and prevent safety accidents caused by assembled temporary equipment after installation. However, it was investigated that most construction site managers are not aware of its importance, such as recognizing the quality management of assembled temporary equipment as a task of managing temporary structures that are dismantled after installation for this construction. The quality management work of assembled temporary equipment at the construction site is carried out in different ways for each construction site because there is no formalized procedure and the subject of performing. In addition, it is analyzed that the manager of the general construction company inspects and reflects the parts that need to be inspected without evidence, so transparency is not guaranteed and the result leads to a serious disaster. Therefore, the purpose of this study is to establish a document preparation-oriented system that provides systematic quality evaluation and management procedures for securing the quality of assembled temporary equipment, develops a checklist for quality evaluation and management, and supports history management on the web.

조립 가설기자재는 본 공사가 시작되기 전 반드시 수행되는 가설공사에 널리 사용되기 때문에, 조립 시 품질확보와 설치 후 운영 시 조립 가설기자재로 인해 발생 가능한 안전사고 예방이 필수적이다. 그러나 현재 대부분의 건설현장 관리자는 조립 가설기자재의 품질관리를 본 공사를 위해 설치 후 해체하는 임시구조물을 관리하는 업무로 인식하고 있는 등 그 중요성을 인지하지 못하고 있는 것으로 조사되었다. 현재 건설현장에서의 조립 가설기자재의 품질관리 업무는 정형화된 절차가 부재하고 이를 수행하는 주체가 불분명하여 건설현장별로 상이한 업무방식에 의해 수행되고 있으며, 설치작업 시 종합건설업체 관리자는 임의의 판단에 의해 점검이 필요한 부분에 대해서만 점검하고 이에 대한 조치사항을 증거자료 없이 전달 및 반영하기 때문에 투명성이 보장되지 못하여 그 결과가 중대재해로 이어지는 문제가 발생하고 있어 이에 대한 개선이 시급한 것으로 분석되었다. 따라서 본 연구에서는 건설현장 내 이해관계자가 조립 가설기자재의 품질확보를 위한 체계적인 품질평가 및 관리 절차를 제공하고, 품질평가 및 관리 업무를 위한 체크리스트를 개발하여 이에 대해 웹(Web)상에서 이력관리를 지원하는 문서 작성 중심의 시스템을 구축하는 데 목적이 있다.

Keywords

Acknowledgement

이 연구는 국토교통부/국토교통과학기술진흥원이 시행하고 한국도로공사가 총괄하는 "스마트건설기술개발 국가 R&D사업(과제번호 21SMIP-A158708-03)"의 지원으로 수행하였습니다.

References

  1. Ahn, K.H., Yoon, C.S., Cheon, B.G., and Kim, Y.S. (2002). "A Study on the Development of Quality Management System by utilizing the Defects Information : With checklist in focus." Journal of the Architectural Institute of Korea, JAIK, 18(4), pp. 105-112.
  2. An, S.J., Son, B.S., and Lee, H.S. (2003). "Data Model for Document Exchange of Construction Projects." Proceedings of KICEM Annual Conference, KICEM, 4, pp. 569-572.
  3. Choi, S.B. (2004). Industrial Safety Great Dictionary, Gold.
  4. Jeong, J.W., and Kim, Y.G. (2019). "A Study on the Analysis of Current Situation and the Deduction of Improvement Measure Regarding the Scaffolding and the Related Components at Construction Site." Journal of the Korean Society of Safety, KOSOS, 34(5), pp. 63-71. https://doi.org/10.14346/JKOSOS.2019.34.5.63
  5. Jeong, S.C., and Lee, H.G. (2016). "A Study on the Comparative Analysis of the Quality Management System of Temporary Equipment and Materials." Journal of the Architectural Institute of Korea, JAIK, 32(9), pp. 43-50.
  6. Jung, S.G., Park, J.E., Cha, Y.W., Han, S.W., and Hyun C.T. (2016). "Improvement of Construction Quality Management through Analyzing Construction Work' s Quality Inspection Results." Korean Journal of Construction Engineering and Management, KICEM, 17(1), pp. 110-118. https://doi.org/10.6106/KJCEM.2016.17.1.110
  7. Lee, M.S. (2004). "A Study on the Establishment of Web Based Construction Working Process Model." Journal of the Architectural Institute of Korea, JAIK, 20(7), pp. 55-62.
  8. Lee, H.S., An, S.J., Son, B.S., and Jang, M.H. (2003). "Development of Web-based Electronic Data Interchange Model to Improve the Collaboration of Participants in Construction Projects." Journal of the Architectural Institute of Korea, JAIK, 19(6), pp. 151-160.
  9. Lim, H.C., Lee, D.H.. and Kim, D.Y. (2018), "A study in Quality Improvement Factors through the Analysis of Distribution and Management of Temporary Equipment." Journal of the Architectural Institute of Korea, JAIK, 20(5), pp. 97-102.
  10. MOEL (Ministry of Employment and Labor). (2020). An Analysis of Industrial Accident Status Report.
  11. MOLIT (Ministry of Land, Infrastructure and Transport). (2021). Building Construction Standard Specification.
  12. KOSHA (Korea Occupational Safety & Health Agency). (2020a). KOSHA GUIDE C-32-2020, KOSHA Research Report, 2020-12.
  13. KOSAH (Korea Occupational Safety & Health Agency). (2020b). KOSHA GUIDE C-42-2011, KOSHA Research Report, 2020-12.