• Journal of Korea Water Resources Association
• /
• v.37 no.7
• /
• pp.527-540
• /
• 2004

In order to investigate characteristics of the primary flow and the secondary currents in the meandering channel, laboratory experiments were conducted in the meandering channel made up of alterative bends haying 120。 arc angle. Experiments were performed in two types of cross-sections, a rectangular cross-section and a curved cross-section which was made to adopt a beta probability function. Three-dimensional velocity fields were measured using a micro-ADV. As the result of experiments, in case of the rectangular cross-section, the primary flow occurred taking the shortest course, which is similar to the result of previous researches. In case of the curved cross-section, the primary flow was expected to occur along the thalweg. but it occurred almost along the shortest way. This is considered due to effects of bottom roughness and sinuosity Not only a main cell but also a secondary cell of secondary currents were clearly shown by mean of the stream function. The secondary current intensity has the maximum value near the apex of the second bend for cases of both rectangular and curved cross-sections. However, the value of the secondary current intensity for the curved section is slightly larger than that for the rectangular cross-section. Also, in case of the rectangular cross-section, the higher the ratio of width to depth is, the larger the secondary current intensity is.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.4
• /
• pp.190-193
• /
• 2012

Transparent diamond-like carbon (DLC) films were synthesized on glass using radio frequency plasma enhanced chemical vapor deposition method from the gas mixture of $CH_4$, $SiH_4$ and Ar. The pressure, the rf-power, $CH_4/SiH_4/Ar$ ratio, and the deposition time were 0.1Torr, 100W, 20 : 1 : 1, and 20 min, respectively. The optical transmittances of DLC-deposited glass and uncoated glass were compared with each other in the visible light regions. The DLC-deposited glass showed transmittance of approximately 83 % and 95 % as compared to the uncoated glass for the wavelength of 380 nm and 500 nm, respectively. The hardness and roughness of DLC-coated glass have been measured by nanoindentation and AFM, respectively. The DLC-coated glass showed a little less or similar optical transmittance compared to the uncoated glass, while the hardness of DLC-coated glass was 2.5 times higher than that of the uncoated glass. The deposited DLC film had the very smooth surface and was thicker than 150 nm after deposition for 20 min.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.6
• /
• pp.872-879
• /
• 2010

Textured vegetable protein (TVP) was fermented by the solid-state fermentation using Bacillus subtilis HA and biologically active compounds were produced by fermentation for 7 days. The longer fermentation time resulted in the color change of fermented TVP with strong dark red and yellow color. Melanoidin production rapidly increased until fermentation for 48 hr, but did change afterwards. The 70% ethanol extract of TVP fermented for 24 hr showed higher DPPH radical scavenging effect with $IC_{50}$ of 0.99 mg/mL but longer fermentation did not increase its activity. Also, 70% ethanol extract of TVP fermented for 72 hr indicated higher ABTS radical scavenging effect with $IC_{50}$ of 1.68 mg/mL. Consistency index in TVP fermented for 48 hr was the highest values with 7.89 $Pa{\cdot}s^n$. Viscoelastic properties of TVP fermented for 48 hr were maximally enhanced, and viscous value (G") is higher than the elastic value (G'). The $\gamma$-polyglutamic acid (PGA) content was increased by increasing fermentation time with 37.72% of $\gamma$-PGA at 168 hr. However, levan content and molecular weight of PGA were decreased with increasing fermentation time from 7.83% to 3.91% and 1649.3 kDa to 1286.8 kDa, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.6
• /
• pp.771-777
• /
• 2017

This study investigated the rheological properties of Calrose rice flour dispersions as well as the effects of different thawing methods (steamer, smart oven, and microwave oven) on quality characteristics of frozen turmeric rice. Apparent viscosity, consistency index, and yield stress significantly increased at higher rice flour concentrations. Magnitudes of storage modulus and loss modulus significantly increased with elevation of rice flour concentration. Frozen turmeric rice thawed using a steamer had the highest moisture content and largest size (length, width, and thickness) among all thawing methods. The L values of turmeric rice after thawing using a steamer was significantly higher than those of other thawing methods. The a value of turmeric rice after thawing using a steamer was significantly lower than those of other thawing methods. Textural properties (hardness, adhesiveness, springiness, cohesiveness, brittleness, and chewiness) of frozen turmeric rice after thawing using a steamer were significantly lower than those of other thawing methods. Therefore, it can be concluded that frozen turmeric rice after thawing using a steamer might be desirable for improvement of texture.

• Korean Institute of Interior Design Journal
• /
• v.13 no.2
• /
• pp.120-132
• /
• 2004

고령사회 2001의 발표에 의하면, 노년인구의 증가는 전 세계적으로 21세기까지 지속될 전망이며, 우리나라도 예외가 아니어서 이에 대한 심각한 사회문제가 예상되고, 이들을 위한 특수주거시설에 대한 환경개선이 요망된다. 본 연구는 노인주거복지시설에서 색채와 조명에 대한 개선방향을 제시하기 위한 것으로, 색채와 조명환경을 정량적, 정성적으로 비교 분석하는데 연구의 목적이 있다. 이를 위해 2003년 2월부터 8월까지 우리나라와 미국의 양로시설 20사례에 대한 현장방문조사가 수행되었고, 모든 시설이 공통적으로 가지고 있는 로비, 복도, 식당, 침실 등 4개 영역이 집중적으로 조사되었다. 1) 색상분포도 조사 결과, 한국시설은 미국 시설과 달리 주조색으로 한색을 많이 사용하고 있으며, 보조색, 강조색의 활용도가 낮은 것으로 나타났다. 2) 색상$\cdot$명도의 간격별 조화 정도에 대한 정량적 평가를 통해 한국시설은 명도대비보다는 색상대비가, 유사조화보다는 대비조화가 두드러졌는데 기능적 측면에서는 이상적이나 친근한 분위기를 만들기에는 한계가 있다. 3) 미도(Aesthetic Measure) 측정 결과, 한국과 미국 시설 모두 평균 이상을 보였는데, 특히 한국시설은 색상 대비 이외에 유사색 조화와 같은 질서요소를 강화시킬 필요가 있다. 4) 한국시설은 미국에 비해 조명 환경이 매우 열악하였는데, 자연채광의 유입은 어느정도 만족스러우나 이를 양질의 조명으로 만들기 방안이 요구된다. 5) 조명방식, 광원유형 등 인공조명에 대한 분석 결과, 한국시설은 매우 단순하며 경제적인 방법에 의존하고 있는데 광원의 선택, 배치, 설치 등 기술적인 보완이 요구된다. 6) 한국시설들의 시설별, 영역별 평균조도는 매우 낮은데, 활동시간대의 권장조도 유지는 물론, 영역 간의 조도 차이를 줄이는 방안이 요구된다.신만의 고유한 해결책으로 발전시키는지를 고찰하고자 한다. 본 논문의 목적은 서울을 사례분석 중 하나로 사용하여 인테리어 디자인 분야의 경계를 대도시로 확장하는 동시에 새로운 적용영역의 가능성을 탐구하는데 있다 하겠다.[C/N]의 값을 나타내었다.다.다.화 기술, 구동방법등에 대한 기술개요와 국내외 기술동향에 대하여 소개하고자 한다.었다.다._{2}$가 0.25[wt%] 첨가된 시편의 20[.deg.C]에서의 유전상수는 16,700으로 최대값을 유전손실을 1.28[%]로 최소값을 나타내었다. 또한 모든 시편은 온도 및 주파수에 따라 유전상수가 완만하게 변화하는 유전이완 특성을 나타내었다.다.수적인 물의 양에 따른 DIAION WA30의 라세미화 효율에 관하여 실험한 결과, 물의 양이 증가할수록 그 효율은 감소하였다. DIAION WA30을 라세미화 촉매로 사용하여 아이소옥탄 내에서 라세믹 나프록센 2,2,2-트리플로로에틸 씨오에스터의 효소적 DKR 반응을 수행해 보았다. 그 결과 DIAION WA30을 사용하지 않은 경우에 비해 반응 전환율과 생성물의 광학 순도는 급격히 향상되었다. 전통적 광학분할 반응의 최대 50%라는 전환율의 제한이 본 연구에서 찾은 DIAION WA30을 첨가함으로써 성공적으로 극복되었다. 또한 고체 염기촉매인 DIAION WA30의 사용은 라세미화 촉매의 회수 및 재사용이 가능하게 해준다.해준다.다. TN5 세포주를 0.2 L 규모 (1 L spinner flask)oJl에서 세포간의 응집현상 없이 부유배양에 적응,배양시킨 후 세포성장 시기에 따른 발현을 조사한 결과 1 MOI의 감염조건 하에서는 $0.6\times10^6$cell/mL의 early exponential시기의 세포밀도에서 72시간 배양하였을 대 최대 발현양을 나타내었다. 나타내었다.

• Journal of Biomedical Engineering Research
• /
• v.24 no.1
• /
• pp.37-44
• /
• 2003

This experimental study is aimed at evaluating the hydrodynamic performance of newly designed self-expandable graft stents under steady flow condition. Two graft stents with different coating materials and a bare TiNi metallic stent for comparison test were used in the experiment. Pressure variation and velocity distribution at the upstream and downstream of the stents were measured at flow rates of 5, 10, and 15 l/min, respectively. Pressure loss due to insertion of the stent increased with increasing flow rate exponentially as expected. At a flow rate of 15 l/min, pressure loss of Polyure-thane(PU)-coated graft stent was 6 times higher than that of TiNi metallic stent, while the pressure loss of a porous Polytetrafluoroethylene(PTFE)-coated graft stent was comparable to a bare TiNi metallic stent. Velocity profiles of the porous PTFE-coated graft stent were similar to those of a bare TiNi metallic stent regardless of flow rate. Furthermore, the velocity profile of PU-coated graft stent revealed an asymmetrical and relatively low central velocity at a higher flow rate than 10 1/min, expecially, where the effects resulted in increases of wall shear stress and normal stress. The worse hydrodynamic behavior of PU-coated graft stent than the other two stents might be attributed to formation of folds due to poor flexibility of coated material when inserting the graft stent into the pipe with a more smaller size, which later gave rise non-symmetry of flow area, increase of surface roughness and jet flow via the crevice between the stent and cylinder wall.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.286-296
• /
• 2010

The study of the development of DJ robots is to meet the demands of the music services which are changing very rapidly in the digital and network era. Existing studies, as a whole, develop music services on the premise of personalized environment and equipment, but the DJ robot is on the premise of the open space shared by the public. DJ robot gives priority to traditional space and music. Recently as the hospitality and demand for cultural contents of South Korea expand to worldwide, industrial use of the contents based on traditional or our unique characteristics is getting more and more. Meanwhile, the DJ robot is composed of a combination of two modules. One is to detect changes in the external environment and the other is to set the properties of the music by psychology, emotional engineering, etc. DJ robot detect the footprint of the temperature, humidity, illumination, wind, noise and other environmental factors measured, and will ensure the objectivity of the music source by repeated experiments and verification with human sensibility ergonomics based on Hevner Adjective Circle. DJ robot will change the soundscape of the traditional space being more beautiful and make the revival and prosperity of traditional music with the use of traditional music through BGM.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.51-56
• /
• 2016

In this paper, we propose an Arduino-based plant monitoring system. The proposed system is based on the Arduino platform, using an environmental sensor and a pressure sensor for measuring temperature, humidity and illuminance in order to monitor the state of the environment and the facilities of the plant. Monitoring data are transmitted to a ZigBee coordinator connected to a server through a radio frequency transceiver. When using a pressure sensor and the environment sensor data stored on the host server, checking the pressure in the environment of the plant and equipment is intended to report any alarm status to the administrator. Using a grid line-based key distribution scheme, the authentication node dynamically generates a data key to protect the monitoring information. Applying a ZigBee wireless sensor network does not require additional wiring for the actual implementation of a plant monitoring system. Possible working-environment monitoring of an efficient plant can help analyze the cause of any failure by backtracking the working environment when a failure occurs. In addition, it is easy to expand or add a sensor function using the Arduino platform and an expansion board.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.6
• /
• pp.277-281
• /
• 2009

Superhydrophobic $SiO_2$ thin films were successfully fabricated on a glass substrate by sol-gel method. To fabricate $SiO_2$ thin film with a high roughness, $SiO_2$ nano particles were added into tetraethoxysilane (TEOS) solution. The prepared $SiO_2$ thin film without an addition of $SiO_2$ nano particles showed a very flat surface with ca. 1.27 nm of root mean square (RMS) roughness. Otherwise, the $SiO_2$ thin films fabricated by using coating solutions added $SiO_2$ nano particles of 1.0, 2.0 and 3.0 wt% showed a RMS roughness of ca. 44.10 nm, ca. 69.58 nm, ca. 80.66 nm, respectively. To modify the surfaces of $SiO_2$ thin films to hydrophobic surface, a hydrophobic treatment was carried out using a fluoroalkyltrimethoxysilane (FAS). The $SiO_2$ thin films with a high rough surface were changed from hydrophilic to hydrophobic surface after the FAS treatment. Especially, the prepared $SiO_2$ thin film with a RMS roughness of 80.66 nm showed a water contact angle of $163^{\circ}$.

• Journal of the Korean Magnetics Society
• /
• v.13 no.3
• /
• pp.97-102
• /
• 2003

Synthetic ferrimagnetic layer (SyFL) with structure NiFe/Ru/NiFe which can be applied high density TMR device in free layer were prepared by an inductively coupled plasma (ICP) helicon-sputter. We proposed a model of predicting coercivity (H$\_$c/), spin-flopping field (H$\_$sf/), and saturation field (H$\_$s/) as a function of Ru thicknesses, from the equilibrium state of energies of Zeeman, exchange, and uniaxial anisotropy. We fabricated the samples of Ta(50 ${\AA}$)/NiFe(50${\AA}$)nu(4∼20${\AA}$)NiFe(30 ${\AA}$)/Ta(50${\AA}$), and measured the M-H loops with a superconduction quantum interference device (SQUID) applying the external field up to ${\pm}$ 15 kOe. The result was well agreed with the proposed model, and reveal K$\_$u = 1000 erg/㎤, J$\_$ex/ =0.7 erg/$\textrm{cm}^2$. We report that H$\_$c/ below 10 Oe is available, and R$\_$u/ thickness range should be in 4-10 ${\AA}$ for MRAM application. Our result implies that permalloy layers may lead to considerable magnetostriction effect in SyFL and intermixing in NiFe/Ru interfaces.