• Journal of the Korean Ceramic Society
• /
• v.39 no.8
• /
• pp.775-782
• /
• 2002

The effects of solid and dispersant concentration was investigated by wet-sieving method for knowing the amount of coarse particle in fine powders. In the work alumina powders, sodium hexametaphosphate and sodium polyacrylate were used for preparing slurry. It was confirmed that the coarse particle mass increased by increasing alumina concentration and decreasing dispersant concentration. With systematic measurements we know that the alumina powder and dispersant of one weight percent(1.0wt%) were proper quantity for coarse particle mass measuring, respectively. Sodium polyacrylate as dispersant showed higher coarse particle mass than sodium hexametaphosphate. The sieve mass was decreased according to increase of experiment number. Based on experiments it was considered that wet-sieving method is good tool for measuring a coarse particle mass in fine powders.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.1020-1026
• /
• 2011

Seasonal characteristics of water soluble ions in atmospheric particles in Cheonan were studied between 2008 and 2009. $Na^+$, $NH_4^+$ and $NO_3^-$, $SO_4^{2-}$ were the principle cations and anions in both coarse and fine particles. Water soluble ions occupied 24.4%(spring), 33.2%(summer), 40.7%(fall), and 39.6%(winter) of the total mass of coarse particles. In fine particles, 43.0%(spring), 59.7%(summer), 55.4%(fall), and 53.2%(winter) of mass were occupied by water soluble ions. From the factor analysis, 2 and 4 factors were extracted for water soluble ions in coarse and fine particles, respectively. 70.33% of water ions in the coarse particles were estimated from the natural source, but 66.01% in the fine particles were from the anthropogenic source.

• Journal of the Korean Magnetics Society
• /
• v.11 no.4
• /
• pp.157-162
• /
• 2001

Rheological characteristics of Sm-Co type plastic magnet compound for powder injection molding process were investigated with the variation of the magnetic powder size, their relative contents and volume fraction using the mixture of fine and coarse powder. Shear viscosity of Sm-Co type compound was decreased with increasing the size of coarse powder due to the increase of powder packing density. However, the smaller the average size of fine powder resulted in the higher viscosity of compound due to the increase of agglomeration force. In case of mechanically milled Sm-Co type powder, the viscosity of compound with the mixture of coarse powder of 125∼75 ㎛ and fine powder of average size of 4.9 ㎛ greatly depends on their relative contents and shows a minimum value at the 60 % coarse powder fraction. This means that the compound shows a maximum packing density at the 60% coarse powder fraction. Compound viscosities satisfied well the rheological model with the volume fraction of magnetic powder, and maximum volume fraction of magnetic powder in Sm-Co type compound for powder injection molding was about 66%.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.2
• /
• pp.268-276
• /
• 1998

Dentigerous cyst is a cyst arising by a seperation of follicles from around the anatomical crown of an unerupted tooth within the jaws. The dentigerous cyst is seen during routine radiographic examination. It is detected radiographically as a sharply delineated, round or oval, unilocular, homogeneous, and radiolucent area within which there is the crown of an unerupted tooth. The histological appearance of the dentigerous cyst is usually attached to the tooth at the cementoenamel junction and the sac lined by a thin, regular. stratified squamous epithelium. The dentigerous cyst can be treated by two surgical procedures: enucleation or marsupialization. The size and location of the lesion usually dictates the surgical procedures. The marsupialization consists of the removal of only a portion of the wall of the cyst to make the remaining cystic lining continous with the oral mucosa. The cyst, deprived of its supporting hydrostatic pressure, gradually shrinks until it is obliterated. The marsupialization is the best way to conserve the tooth affected by a dentigerous cyst and to permit its eruption. especially in a young person. Main advantages of the marsupialization are its relative simplicity and its conservation with respect to adjacent important structures. In marsupialization technique, a plugger can be constructed, if necessary, to maintain the opening and prevent food debris from entering the cystic cavity. However, the disadvantage is the potentiality of leaving pathologic tissues. Therefore frequent recall appointments are advisable.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1782-1786
• /
• 2008

To investigate the characteristics of elemental components of atmospheric particles in Cheonan, atmospheric particles were sampled using a high volume air sampler equipped with a 5-stage cascade impactor during 2006. 16 elemental concentrations in fine and coarse particles were determined using ICP-AES and ICP-MS. The total mass concentrations of fine and coarse particles were 33.23 and $20.66{\mu}g/m3$, respectively, and the total elemental concentrations were 1.27, $1.71{\mu}g/m3$, occupying 3.8 and 8.3% of the total mass. Fe, Al, Ti were the most abundant elements in both fine and coarse particles, and the total Pb concentration was 84.55ng/m3, below the National standard. Enrichment factor for Sc, Cr, Cu, Zn, As, Se, Sn, Pb in fine particles were above 1,000. This indicates that the elements in fine particles are mainly from the anthropogenic sources including automobiles.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.1
• /
• pp.85-92
• /
• 2014

Dentigerous cyst is the most common developmental odontogenic cyst of the jaw which is associated with unerupted teeth. Treatment modalities range from enucleation to marsupialization. Enucleation is the process in which the cyst is completely removed, and this is usually indicated for smaller lesions. Larger cysts can be treated by marsupialization, which is a process that consists of making a surgical cavity on the wall of the cyst, emptying its content and maintaining the continuity between the cyst and the oral cavity. This procedure allows decompression of the cyst, regeneration of the bone-defected area, and also lets the wall of the cyst change into normal mucosa. This technique will protect adjacent structures and will promote spontaneous eruption of succedaneous teeth previously surrounded by the cyst. These are two case reports of a 5-year-old and an 11-year-old boy with dentigerous cysts found regarding supernumerary tooth and pulpotomized mandibular primary molars, respectively. Due to the large size of the cysts, both cases were treated with marsupialization. This case report shows that in cases regarding large-sized dentigerous cysts, marsupialization can be an effective surgical technique that promotes spontaneous eruption of cyst-involved succedaneous teeth and the preservation of adjacent teeth.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.133-134
• /
• 2003

대기 중에 부유하고 있는 입자상 물질은 보통 입경에 따라 2.5$\mu\textrm{m}$ 이하의 미세입자와 2.5$\mu\textrm{m}$ 이상의 조대입자로 나눌 수 있다. 조대입자는 토양 및 해염, 꽃가루, 화산재 및 토양 먼지와 같이 자연발생원에서 주로 생성되며, 인체에 큰 영향을 미치지 않는다. 그러나 미세입자는 화석연료의 연소, 자동차의 배출가스 및 화학물질의 제조공정 등의 인위적 발생원에서 주로 방출되며, 또한 이들 1차 생성분진과는 달리 대기중에서 황산가스나 휘발성 유기화합물 둥이 응축과정을 거쳐 가스상에서 입자상으로 변환되어 생성된 2차 입자도 환경학적으로 매우 중요한 의미를 갖는다. (중략)

• Journal of the Korean Ceramic Society
• /
• v.38 no.8
• /
• pp.740-748
• /
• 2001

출발원료 Si 분말의 입자크기를 다양하게 하여 질화반응 및 가스압 소결시 입자크기에 따른 산소함량의 차이에서 나타나는 상변화와 그로 인한 치밀화 거동, 미세구조 발달 및 기계적 특성에 대하여 고찰하였다. 145$0^{\circ}C$의 질화반응에서는 조대분말을 사용한 경우가 미세분말을 사용한 경우보다 높은 질화율을 나타냈으며, 각 분말크기에 따른 native oxide의 함량차에 따라 각기 다른 2차 결정상들이 검출되었다. 조대분말을 사용한 경우에는 제 2상의 석출로 인한 액상량의 부족으로 고온의 소결온도에서도 치밀화를 이루지 못해 낮은 강도값을 나타내었다. 한편, 미세분말을 사용한 경우에는 질화반응 후 석출된 제 2상이 소결온도가 증가함에 따라 용융되면서 치밀화를 이루어 높은 강도값을 나타내었다. 높은 강도값은 미세분말을 사용한 시편들에서 얻어졌으나 높은 파괴인성값은 상대적으로 큰 분말을 사용한 시편들에서 얻어졌는데, 이는 미세한 입자들로 구성된 기지상 내에 잘 발달된 주상정 입자들을 갖는 미세구조에 기인된 것으로 사료된다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.231-232
• /
• 2001

도시지역의 주 오염물질 중 하나인 입자상 물질(Particulate Matter:PM)은 공기역학적 직경 2.5$\mu\textrm{m}$을 기준으로 이산형 분포를 하여 2.5$\mu\textrm{m}$이하를 미세입자, 2.5$\mu\textrm{m}$이상을 조대입자로 나뉜다. 이 미세입자는 주로 자동차 배출, 산업연소에서 배출되는 가스상 물질의 2차 반응으로 발생한다(Pope et al., 1995). 미세입자는 상당량이 2차 반응에서 생성되는 물질이며, 크기가 작은 대신 상대적으로 표면적이 크기 때문에 각종 중금속과 유해 대기오염물질과의 흡착이 용이하여 호흡기 계통의 질병을 일으킬 수 있는 확률이 조대입자에 비해 높다고 알려져 있어 인체에 미치는 영향이 클 것으로 시사되고 있다(Dockery et al., 1998). (중략)

• Journal for History of Mathematics
• /
• v.16 no.2
• /
• pp.1-10
• /
• 2003

The mathematicians in the chosun dynasty ages had widely manipulated the beautiful mathematical problems by using the Pythagorean Theorem. This paper is intended to introduce some problems using the approximate values of ratios.