• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.1-4
• /
• 2004

In this paper. applicability of high early strength type AE water reducing agent(HESAEWA) developed by the authors is discussed by applying Mock-up test. For fresh concrete properties, concrete using existing AE water reducing agent(EAEWRA) and HESAEW A meets the target slump and air content at jobsite. Setting time of concrete using HESAEWA is shorter than that using EAEWRA. Remarkable variance of bleeding and settlement is not observed with type of AE water reducing agent. For hardened concrete properties, use of HESAEW A results in higher strength development compared with that of EAEWRA at standard curing and in field curing condition. Reaching time to accomplish 5MPa of compressive strength. which is possible to remove side form. is taken using HESAEWA earlier than that of EAEWRA by 1day. Therefore, it is confirmed that use of HESAEWA can meet the requirements of general quality of concrete and achieve high early strength development as well as has a desirable field applicability.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.91-94
• /
• 2006

The way to shorten a construction period is considered to an very important technology development element as reducing the formwork removal periods with promoting strength revelation own concrete. This study executed experiment to review usability of early strength revelation chemical admixture which is judged in ways effective with premature removal of form about concrete. Use of early strength revelation AE water reducin admixture is apperaing so that strength revelation by early hydration promotions is excellent. The results of being applied proposed work process are that compressive strength are appeared more than 5MPa within 16 hours so that removal of vertical form was possible. the concrete compressive strength satisfied with a more than 2/3 of specified concrete strength for removal of horizontal form are appeared in 42 hours of 27 MPa proportioning strength, in 36 hours of 30, 35 MPa proportioning strength so that the 6 days cycle time of concrete structural frame work is cut by 2 days as shortening delayed period in works of removing slab forms. So construction cost reductions and a construction period shortening are judged so that it is possible.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.793-796
• /
• 2008

최근 콘크리트 구조물 공사에서는 공기단축을 통한 경제성 확보와 동절기 초기동해방지를 위하여 콘크리트의 조기강도 발현을 요구되고 있다. 이에 본 연구에서는 조강형 AE감수제의 종류별 단위시멘트량과 양생온도 조건에 따른 압축강도발현 특성, 공기량 및 슬럼프 등의 경시변화를 검토하여 재령 24시간에 거푸집 조기 제거가 가능한 압축강도 5MPa을 발현시킬 수 있는 최적 조건을 제시하고자 하였다. 실험결과, 온도 $15^{\circ}C$에서 거푸집조기 제거가 가능한 압축강도 5MPa 발현 시간은 조강형 나프탈렌계 감수제를 사용한 경우 단위시멘트량 $330kg/m^3$에서 표준형 감수제에 비하여 10시간 빠른 22시간, $360kg/m^3$에서는 7시간 빠른 20시간, $390kg/m^3$에서는 4시간 빠른 18시간으로 나타났다. 또한 온도 $5^{\circ}C$에서는 조강형 나프탈렌계 감수제를 사용한 경우 단위시멘트량 $330kg/m^3$에서 표준형 감수제에 비하여 10시간 빠른 32시간, $360kg/m^3$에서는 7시간 빠른 30시간, $390kg/m^3$에서는 4시간 빠른 27시간으로 나타났다. 따라서 양생온도가 $10^{\circ}C$ 높아짐에 따라 압축강도 5MPa 도달시간은 10시간이 단축되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.269-272
• /
• 2003

This study is intended to investigate the properties of concrete using AE Water Reducing Agent of Early-Strength Type. According to the results, as for the replacing method of mineral admixture, setting time is shortened faster in order of replacement for fine aggregate, combination and replacement for cement, and when AE Water Reducing Agent of Early-Strength Type is used, it is shortened by about 4 hours, compared with normal AE Water Reducing Agent Compressive strength is lower in the case of replacement for fine aggregate, but higher in the other case than that of plain concrete. And When AE Water Reducing Agent of Early-Strength Type is used, early compressive strength is very high in comparison to normal AE Water Reducing Agent. Early strength development is very favorable by the use of AE Water Reducing Agent of Early-Strength Type regardless of the replacing method of mineral admixture at $20^{\circ}C$, but at $l0^{\circ}C$, it is effective for Early strength development that W/B is lowered to below 45%, BS of 20% is replaced for fine aggregate, and AE Water Reducing Agent of Early-Strength Type is used.