• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.135-140
• /
• 2007

유비쿼터스는 정보화 사회의 키워드가 되면서 새로운 정보통신 환경구축이 요구되고 있다. 국내 아파트에 있어 홈네트워크 설치가 증가하고 있으며 편리하고 다양한 기능들이 부가되고 있다. 세대내에서 조명, 난방, 가전제어와 보안 서비스의 제공은 물론 외부로부터 인터넷, 핸드폰으로 세대에 설치된 기기를 원격제어 감시하는 지능화로 발전되고 있다. 조명설비에 있어 첨단기술과 통합한 다양한 솔루션으로 세대의 일괄소등, 조광패턴제어, 무선리모콘, 유무선 원격제어가 활용되고 있으며 다양한 디자인의 조명기구와 제어시스템의 개발로 시간과 분위기에 적합한 조명을 연출하고 있다. 조명제어기술의 발전은 에너지 절감효과, 사전감지 기능으로 안전성 확보, 사용자의 편리성이 향상되어 미래 주거에 있어 쾌적하고 경제적인 조명환경 구현에 이바지하게 될 것이다.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.163-166
• /
• 2004

The conventional fluorescent lamp dimming system using an another control line is complex and will increased the cost. Therefore, many studies have focused on the wireless communication, but it is not fit for dimming system because of the interference generated by the infra-red light of lamp or switching noises in ballast. So, we applied the power line communication on the dimming system and we proposed a new coupling circuit using the voltage controlled impedance convertor for improving the performance of the FH/SS PLC modem. The performance for the proposed modem is evaluted by the BER.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.257-262
• /
• 2008

Available daylight in inside offers comfortable view environment, and psychological and physical advantages to people in the room. But, it has a problem of an excessive direct sunlight. This study calculated daylight responsive dimming control slope by Roller Shade system with Mock-up test. With three 1/2 scale Mock-up rooms, we performed a test for calculation of daylight responsive dimming control slope in different shade height of each room through the different height of roller shade systems. This research will be used as a fundamental study for automated roller shade systems.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.1
• /
• pp.47-52
• /
• 2005

This paper presents dimming control system for automotive 35W metal halide discharge(MHD) lamp electronic ballast. HID lamp demands a highly efficient ballast and very complex control circuitry that can control complex transient state in applying to automotive. Therefore, in this paper, a microcontroller-based digital control method for the HID lamp ballast is presented for optimal control that can adapt complex transient state, steady state and various environments. In developed dimming system, the system is designed to control the lamp output voltage step by step(continuous) using microcontroller according to CdS sensor. Therefore the designed dimming control system give good driving condition to diver and realize the power control effectively. The results of the proposed system is verified through various experiment results.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2792-2794
• /
• 1999

본 논문에서는 컴팩트 형광램프용 조도제어형 전자식 안정기의 각 동작 모드별 해석과 설계 및 실험적 고찰을 제시한다. 부스트 컨버터와 해프브리지형 고주파 공진형 인버터를 결합한 일단계 인버터 안정기를 제안하고 그 기본동작 및 특성에 관해 검토한다. 역률을 높이기 위한 방법으로 부스트단에서는 전류불연속 모드로 동작하도록 하였다. 전력 손실을 줄이기 위해 직렬 공진형 인버터는 영전압 영전류 스위칭 방식을 적용하였다. 출력 전압을 조정할 수 있도록 설계하여 조도제어를 구현하였으며 다단계의 조도제어가 가능해진다. 전자식 안정기 시스템을 구성하기 위한 이론적인 근거를 마련하기 위하여 공진형 인버터를 동작 모드별로 해석하고 그 결과를 토대로 동작주파수 및 회로정수를 결정하며, 실제 전자식 안정기를 제작하여 시동특성과 조광특성을 비교 분석하였다. 36W 형광램프에 대한 실험 결과와 등가회로 모델에 의한 Pspice 시뮬레이션 결과를 토대로 제안한 전자식 안정기의 적용가능성을 입증하였다.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2005.03a
• /
• pp.380-387
• /
• 2005

Little has been understood about the seismic behavior of curved bridges due to the different structural characteristics compared to straight bridges. In this study, a simple numerical model, widely used for seismic analysis, is modified for a more realistic estimation of the seismic behavior. The seismic response of curved bridges obtained with the modified simple numerical model was compared with the result using a more sophisticated model to verify the feasibility. Seismic analyses were performed on three-span continuous curved bridges, which is a structural system widely used in highway structures. Numerical model of the three-span continuous curved bridges were subjected to seismic loads in diverse directions. From the result of the analysis. it was found that the direction of the seismic load have significant effect of the seismic behavior of curved bridges when the central angle exceeds 90 degrees.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.71-74
• /
• 2002

We have development the dimming controller using the ac chopper technique. The ac chopper change the amplitude of the input source voltage with the unchanged its frequency. The conventional dimming controller is operated by controlling voltage phase and is consist of the triac. It has a bad characteristic about a current THD and a power factor. But the dimming controller using the at chopper technique has a low current THD and a good power factor. The developed dimming controller is consist of the MOSFET and the low pass filter. The system is operated by the variation circuit of the input source voltage and the microprocessor.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.97-100
• /
• 2008

The daylight responsive dimming system is an energy saving system that automatically controls lighting output of artificial lighting according to available daylight in inside, as well as keeps uniform workplace illuminance. The basic three components of the daylight responsive dimming system consist of a photosensor, a controller and a dimming ballast. This paper is a fundamental study of photosensor modeling for the daylight responsive dimming system. The correlation between photosensor illuminance on the ceiling and workplace illuminance is an important factor to accuracy of system performance, so that the purpose of this study is to improve accuracy for daylight responsive dimming system. This study performs to derive the optimized conditions of photosensor using the RADIANCE.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.10a
• /
• pp.12-15
• /
• 2016

데이터베이스 시스템의 트랜잭션 로깅이나 파일 시스템의 저널링에서 데이터 저장시 입출력 동기화(Synchronous I/O)는 올바른 프로르램 동작에 필수적이다. 하지만 입출력 동기화로 인한 프로그램의 지연 혹은 기다림은 응용 프로그램 성능의 저하를 가져온다. 본 논문에서는 차세대 저장장치인 비휘발성 메모리를 사용하여 지속성을 보장하며 쓰기 연산의 응답성을 개선하는 사용자 수준의 스토리지 모듈을 제안하고 기존의 동기화된 쓰기 연산과 성능을 비교하였다. 특히 멀티코어 환경에서 동시에 들어오는 여러 입출력 쓰기 연산 요청에 대하여 효율적으로 처리하였다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.11
• /
• pp.553-560
• /
• 2005

This paper presents a study on the dimming control of electrodeless fluorescent lamp. To do this the equivalent model of electrodeless fluorescent lamp (ENDURA 100w Type) was first established. The resulted model of the lamp was applied to the two kinds of dimming control method, one is the variable switching frequency method and the other is the variable dc link voltage method. And the comparison results of the dimming characteristics between the two methods was presented. Theoretical predictions were verified by the experimental results on the ENDURA 100W type electrodeless fluorescent lame.