• Proceedings of the Korean Society of Food and Cookery Science Conference
• /
• 2005.05a
• /
• pp.90-90
• /
• 2005

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2002.08a
• /
• pp.157.1-157
• /
• 2002

• Journal of the Korean association of regional geographers
• /
• v.15 no.2
• /
• pp.192-203
• /
• 2009

The purpose of this paper is to elucidate the formative processes of depositional landforms in Jiwoo drainage basin which located in the most upstream reach of Namgang River. Through the analysis of morphologic characteristics and sedimentary facies, the formative processes can be summarized as follow: First, the high depositional landforms(Sapyeong, Eungam, Naedongdyttle site) were formed by gelifluction process in the periglacial environment during the last glacial period. And the relative height over river bed of them is getting lower from upper to downstream. The extent of the high depositional landforms is assumed about 1 kilometer downstream far from the confluence of Jiwoo stream and Namgang River. Second, the sediments in the gentle slope at Jangseungbuldle were carried by gelifluction process during the last glacial stage after the deep-weathered bedrock had formed a gentle slope. Third, the high depositional landforms were dissected during warm and humid environment of postglacial stage, and some sediments of them were left in the river bed. Later, as the more upstream high depositional landforms were dissected completely, stream power was getting more than resistance(sediment storage) and the low depositional landforms(Sapyeong, Yongchusa, Deungbangdle site) were formed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.6
• /
• pp.639-644
• /
• 2015

A cylindrical secondary Li-ion cell is a device in which stored chemical energy is converted to electrical energy via an electrochemical reaction. These cells are widely used for applications that require high capacity and rate power, such as notebooks, power tools, and electric vehicles. The role of a center pin is to retain the channel for gas release, preventing blockage of the hollow of the jelly roll during a charge-discharge cycle, and to prevent an internal short circuit for tearing of separator under mechanical free fall. In this paper, two experiments are conducted with and without the center pin to experimentally verify the importance of the role of the center pin. The first experiment is a 50-cycle charge-discharge cycle test, and the second is a free fall test conducted according to the Underwriters Laboratories (UL) standards. Based on these experiments, we demonstrate that the center pin in a cylindrical cell is a very important component in terms of safety.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1903-1907
• /
• 2013

Heart condition should be observed for long periods of time because it does not appear abnormal all the time. However, there are many difficulties checking our health for a long time due to its size, operation of equipment, and cost. To solve these problems, an electrocardiograms(ECG), specially interfacing three gel-less metal electrodes for low cost portable applications, is designed and implemented. Gel-less metal electrodes are used for ECG monitoring system instead of gel-type electrodes that can cause skin rashes and itching problem. The whole ECG system consists of two parts-analog and digital circuits. The analog measurement circuit that has a 18*25mm size is made up of op-amps maintaining a sufficiently high common-mode noise rejection and passive elements of SMD type. Analog heart signal is converted to digital stream suitable for display on a TFT-LCD by an 8-bit microcontroller. The size of the completed ECG system is 25*80*50mm and its weighing is about 150g, which is small enough to be easily used. Therefore, the implemented ECG system can be used as a portable one.

• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.90-93
• /
• 2008

We developed a variety of polymeric jelly phantoms that can be used in hyperthermia using an electromagnetic wave as an auxiliary cancer therapy. Particularly, using an appropriate material composed of polyethylene, deionized water, and sodium chloride, jelly phantoms for brain was prepared. Also, their electrical properties were characterized by measuring the dielectric constant and conductivity. As the results, overall electrical values of the phantoms decreased with increasing the amount of the components of the materials, excepted for sodium chloride. Additionally, storage characteristics of the phantoms showed a sustainable stability up to 6 months. Based on the experimental results, it can be proposed that jelly phantoms containing a ferro-magnetic particle could be a potential material for cancer therapy following the further study on the temperature elevation effect and the evaluation of electromagnetic properties of the materials.

• The Journal of the Korea Contents Association
• /
• v.12 no.11
• /
• pp.119-132
• /
• 2012

Korea's latest quantitative urban development led to a result to lose our public properties' identity provided by urban environment, so we now have to think how to solve environmental matter of one-sided public design. Because one city's public environment is the central axis to determine its first impression and also connected with its overall value, the region's value show obvious differences by its urban scape design. Therefore we analyzed current cityscape of Tokyo's Marunouchi street and Avenue des Champs-Elys$\acute{e}$es in Paris which applied how to connect visual and physical characteristics of urban space representation to outdoor space's nature well, and tried to reconsider what is our design identity of creative cityscape.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.1
• /
• pp.64-67
• /
• 2000

Jellies enhancing physiological functions were prepared with using 5 and 10% dietary fiber isolated from ascidian (Halocynthia roretzi) tunic collected from recycled seafood waste. The texture development of the samples was examined with two-bite compression test and analyzed using five sorts ofrheological parameters with texture profile analysis as follows; hardness, adhesiveness, springiness, cohesiveness and gumminess. All the rheological parameters decreased in the fiber enhanced jellies. However, the springiness and cohesiveness increased slightly in the fiber enhanced jellis. Hunter L' and d' values increased in the fiber enhanced jellies and accordingly the color was light yellow. a' value showed green with the addition of fiber. As a result of sensory evaluations, the color and overall acceptability of 10% fiber enhanced jelly were significantly different at p<0.05. The 10% fiber enhanced jelly was noted as having high sensory scores and peferable acceptability.

• Resources Recycling
• /
• v.24 no.2
• /
• pp.29-35
• /
• 2015

A feasibility test was carried out for upcycling of waste jelly-filled communication cables together with the development of environmentally friendly processes and equipments. High pressure water injection is proved to be an exceptionally environmentally friendly and highly efficient mechanical process. A batch-type cable barking equipment is designed and built on the basis of computational fluid dynamics modelling. It is optimized in terms of energy consumption and productivity with very high copper recovery of 99.5%. Copper nano-powder is prepared by an electrical wire explosion in ethanol media in order to improve the value of final products, and the preliminary economical assessment is also conducted.

• Resources Recycling
• /
• v.25 no.3
• /
• pp.37-42
• /
• 2016

Highly efficient and environmentally friendly mechanical process was developed for the higher recovery rate and productivity in the recycling of waste jelly-filled communication cables. Only the simplest mechanical method was designed and built for a continuous process, further proved experimentally along with the addition of several parts such as brush-type rollers and scrappers. In this process, the recovery rate and productivity were 98% and 55 Kg/hr respectively. This process is thought to be simple but highly advanced method for the commercialization of green process.