• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.474-478
• /
• 2008

A new covered barley variety, "Geungangbori" was developed from the cross between Milyang 55 which have lodging tolerance and easy brittleness and Suweon 260 with good quality by barley breeding team in the Yeongnam Agricultural Research Institute (YARI) in 2002. A promising line, YMB3855-3B-14-1-1-1, was selected in 1999. It was designated as the name of Milyang 110. It was prominent and had good result from regional adaptation yield trials (RAT) for three years from 2000 to 2002 and released as the name of "Geungangbori". Geungangbori is resistant to barley yellow mosaic virus and moderately resistant to powdery mildow. The average maturing date was same with Olbori on paddy field in regional adaptation yield trials for 2000-2002. Its culm length is 17 cm shorter than that of Olbori and the spike length is 4.4cm, it's longer than olbori. The 1,000 grain weight of Geungangbori was 34 g, same as Olbori, but the number of spikes per $m^2$ and test weight ware lower than those of Olbori. The yield potential of Geungangbori was 4.22 MT/ha on paddy in regional adaptation yield trials for 2000-2002. which was 7% higher than that of Olbori. The cooking quality of Geungangbori were similar to Olbori such as water absorption rate and expansion rate. But the crude protein content is lower than Olbori. This variety is suitable for double cropping system with rice in the southern part of the Korean Peninsula.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.3
• /
• pp.12-31
• /
• 2016

Gangwon Provincial Office, which is Historical Landmark No. 439, existed from 1395 to 1895. It played a significant role of provincial administration. Gangwon Provincial Office was rebuilt in the $17^{th}$ Century when governors' additional job system began. It had 50 buildings and 670 sections. During the Japanese colonial era and the Korean War, most of the buildings were demolished, and in 2005 partially restored. Currently, after the old Wonju City Post Office was demolished, the back garden facilities of the Provincial Office are being restored. The back garden of Gangwon Provincial Office was completely destroyed when the Japanese army base at Wonju made it a playing field during the Japanese colonial era. After demolishing the old post office in the back garden, excavation and investigation were made. A pond and building relics were found, but they were too damaged to be restored. However, this thesis found that there were Bongraekak, Yeongjusa(Kwanpungkak), Cheyako, Joojeong Rainbow Bridge after studying literature and paintings. There were also Hwansunjeong and Bangjangdae outside the pond. The names of the back garden and how they were made are related to hsien. In the pond, they made 3 islands signifying Mt. Samshin(immortal world) in the legend and built pavilions on that. The pavilions of the back garden were named Bongrae, Yeongju, and Bangjang, and the titles of other pavilions also had the names of hsien. The back garden of Gangwon Provincial Office was made like an immortal world, befitting its role of governing Mt. Bongrae(Mt. Geumgang.) The governors of Gangwon Province often went to the back garden and enjoyed becoming a hsien. They regarded themselves as the owners of Bongrae, i.e., the immortal world. Gangwon Provincial Office has a unique historical significance because it implemented an immortal world, making use of the characteristic of Gangwon Province.

• Korean Journal of Agricultural Science
• /
• v.16 no.2
• /
• pp.212-224
• /
• 1989

This paper reports results of an investigation to determine properties of superplasticizered fly ash concrete. The mixture proportions of fly ash were 0, 10, 20 and 30%, by weight of cement, and superplasticizer was added as a percentage of fly ash, 0, 0.6, 12 and 1.8%. To investigate the effective use of the superplasticized fly ash concrete, the basic data were analyzed. The results obtained were summarized as follows : 1. The unit water content was decreased by 1%, 6% and increased by 2% to the ratio of addition of fly ash 10%, 20%, 30%, respectively, but in case of the superplasticized fly ash concrete, it was decreased by 3~16%, 4~14% and 10~17%, at 0.6, 12, and 1.8% dosage of superplasticizer, respectively. 2. In the properties of the fresh fly ash concrete, the slump loss was reduced with the ratio of replacement of fly ash increased, and with times went by. When using superplasticizer in fly ash substituting concrete, the fludity in the concrete was not decreased. 3. The compressive strength of fly ash concrete at early ages was lower than that of ordinary concrete. At the later age of 28 days, the compressive strength with 20% addition of fly ash was increased than that of ordinary concrete. In cased of 10%, 30% addition of fly ash, the compressive strength were reduced. From this, it was proved that the optimum amount of fly ash appears to be about 20%. The compressive strength at all ages of superplasticized fly ash concrete was significantly higher than that of fly ash concrete, with increasing fly ash content. 4. In case of the tensile strength, the effects of the increasing strength with the ages were similar to those of the compressive strtength, and at the later ages was seen a decreasing tendency of strengths. 5. The correlation between compressive and tensile strength of superplasticized fly ash concrete was highly significant. The multiple regression equations of compressive and tensile strength were obtained on a function of the mixture proportion of fly ash and the addition of superplasticizer. The relation between compressive and tensile strength is higher than for ordinary concrete. The strength ratio is 7~11, and it is higher than that of ordinary concrete, 8~10. 6. Bulk density was decreased by 1~3% compared with ordinary concrete with the mixture proportion of fly ash increased, 10~30%, and decreased by 1~2% with the superplasticizer added 0.6~1.8%.

• Journal of the Korean Vacuum Society
• /
• v.17 no.1
• /
• pp.16-22
• /
• 2008

We studied plasma etching of polycarbonate in $O_2/SF_6$, $O_2/N_2$ and $O_2/CH_4$. A capacitively coupled plasma system was employed for the research. For patterning, we used a photolithography method with UV exposure after coating a photoresist on the polycarbonate. Main variables in the experiment were the mixing ratio of $O_2$ and other gases, and RF chuck power. Especially, we used only a mechanical pump for in order to operate the system. The chamber pressure was fixed at 100 mTorr. All of surface profilometry, atomic force microscopy and scanning electron microscopy were used for characterization of the etched polycarbonate samples. According to the results, $O_2/SF_6$ plasmas gave the higher etch rate of the polycarbonate than pure $O_2$ and $SF_6$ plasmas. For example, with maintaining 100W RF chuck power and 100 mTorr chamber pressure, 20 sccm $O_2$ plasma provided about $0.4{\mu}m$/min of polycarbonate etch rate and 20 sccm $SF_6$ produced only $0.2{\mu}m$/min. However, the mixed plasma of 60 % $O_2$ and 40 % $SF_6$ gas flow rate generated about $0.56{\mu}m$ with even low -DC bias induced compared to that of $O_2$. More addition of $SF_6$ to the mixture reduced etch of polycarbonate. The surface roughness of etched polycarbonate was roughed about 3 times worse measured by atomic force microscopy. However examination with scanning electron microscopy indicated that the surface was comparable to that of photoresist. Increase of RF chuck power raised -DC bias on the chuck and etch rate of polycarbonate almost linearly. The etch selectivity of polycarbonate to photoresist was about 1:1. The meaning of these results was that the simple capacitively coupled plasma system can be used to make a microstructure on polymer with $O_2/SF_6$ plasmas. This result can be applied to plasma processing of other polymers.

• Journal of Radiation Protection and Research
• /
• v.27 no.1
• /
• pp.1-10
• /
• 2002

High energy photon beams from medical linear accelerators produce large scattered radiation by various components of the treatment head, collimator and walls or objects in the treatment room including the patient. These scattered radiation do not provide therapeutic dose and are considered a hazard from the radiation safety perspective. Scattered dose of therapeutic high energy radiation beams are contributed significant unwanted dose to the patient. ICRP take the position that a dose of 500mGy may cause abortion at any stage of pregnancy and that radiation detriment to the fetus includes risk of mental retardation with a possible threshold in the dose response relationship around 100 mGy for the gestational period. The ICRP principle of as low as reasonably achievable (ALARA) was recommended for protection of occupation upon the linear no-threshold dose response hypothesis for cancer induction. We suggest this ALARA principle be applied to the fetus and testicle in therapeutic treatment. Radiation dose outside a photon treatment filed is mostly due to scattered photons. This scattered dose is a function of the distance from the beam edge, treatment geometry, primary photon energy, and depth in the patient. The need for effective shielding of the fetus and testicle is reinforced when young patients ate treated with external beam radiation therapy and then shielding designed to reduce the scattered photon dose to normal organs have to considered. Irradiation was performed in phantom using high energy photon beams produced by a Varian 2100C/D medical linear accelerator (Varian Oncology Systems, Palo Alto, CA) located at the Yonsei Cancer Center. The composite phantom used was comprised of a commercially available anthropomorphic Rando phantom (Phantom Laboratory Inc., Salem, YN) and a rectangular solid polystyrene phantom of dimensions $30cm{\times}30cm{\times}20cm$. the anthropomorphic Rando phantom represents an average man made from tissue equivalent materials that is transected into transverse 36 slices of 2.5cm thickness. Photon dose was measured using a Capintec PR-06C ionization chamber with Capintec 192 electrometer (Capintec Inc., Ramsey, NJ), TLD( VICTOREEN 5000. LiF) and film dosimetry V-Omat, Kodak). In case of fetus, the dosimeter was placed at a depth of loom in this phantom at 100cm source to axis distance and located centrally 15cm from the inferior edge of the $30cm{\times}30cm^2$ x-ray beam irradiating the Rando phantom chest wall. A acryl bridge of size $40cm{\times}40cm^2$ and a clear space of about 20 cm was fabricated and placed on top of the rectangular polystyrene phantom representing the abdomen of the patient. The leaf pot for testicle shielding was made as various shape, sizes, thickness and supporting stand. The scattered photon with and without shielding were measured at the representative position of the fetus and testicle. Measurement of radiation scattered dose outside fields and critical organs, like fetus position and testicle region, from chest or pelvic irradiation by large fie]d of high energy radiation beam was performed using an ionization chamber and film dosimetry. The scattered doses outside field were measured 5 - 10% of maximum doses in fields and exponentially decrease from field margins. The scattered photon dose received the fetus and testicle from thorax field irradiation was measured about 1 mGy/Gy of photon treatment dose. Shielding construction to reduce this scattered dose was investigated using lead sheet and blocks. Lead pot shield for testicle reduced the scatter dose under 10 mGy when photon beam of 60 Gy was irradiated in abdomen region. The scattered photon dose is reduced when the lead shield was used while the no significant reduction of scattered photon dose was observed and 2-3 mm lead sheets refuted the skin dose under 80% and almost electron contamination. The results indicate that it was possible to improve shielding to reduce scattered photon for fetus and testicle when a young patients were treated with a high energy photon beam.

• Applied Biological Chemistry
• /
• v.26 no.2
• /
• pp.82-89
• /
• 1983

In order to develop a commercial storage method of onions by irradiation combined with natural low temperature, two local varieties of onions, precocious species and late ripening, were stored at natural low temperature storage room ($450{\times}650{\times}250cmH.$; year-round temperature change, $2{\sim}17^{\circ}C$; R.H., $80{\sim}85%$) on batch scale following irradiation with optimum dose level. Precocious and late varieties were all sprouted after five to seven months storage, whereas $10{\sim}15$ Krad irradiated precocious variety was $2{\sim}4%$ sprouted after nine months storage, but sprouting was completly inhibited at the same dose for late variety. The extent of loss due to rot attack after ten months storage were $23{\sim}49%$ in both control and irradiated group of precocious variety but those of late variety were only $4{\sim}10%$. The weight loss of irradiated precocious variety after ten months storage was $13{\sim}16$, while that of late variety was $5.3{\sim}5.9%$ after nine months storage. The moisture content, during whole storage period, of two varieties were $90{\sim}93$ with negligible changes. The total sugar content differed little with varieties and doses immediatly after irradiation, but decreased by the elapse of storage period. 33.6% of its content was decreased in control and 12.5% in irradiated group but $20{\sim}26$ decreased in both control and irradiated group of late variety after nine months storage. No appreciable change was observed immediately after irradiation irrespective of variety and dose, but decreased slightly with storage. Ascorbic acid content of precocious variety was increased slightly with dose immediately after irradiation, but those of late variety decreased slightly. Ascorbic acid content were generally decreased during whole storage period. An economical preservation method of onions appliable to late variety, would be to irradiate onion bulbs at dost range of $10{\sim}15$ Krad followed by storage at natural low temperature storage room.

• Journal of Chest Surgery
• /
• v.30 no.9
• /
• pp.891-898
• /
• 1997

Between May 1984 and January 1996, 130 patients were replaced cardiac valve using 150 St. Jude Medical prosthetic valves(42 aortic, 68 mitral, 20 aortic and mitral valve replycements). Follow-up was 97.6% complete. The early mortality rate was 5.4%, and late mortality rate was 4.9%. The valve-related late mortality rate was 3.3%. Of late complications, there were 6 anticoagulant related hemorrhages, 4 thromboembolisms and 1 paravalvular leakage. Linearized rates of late complication and valve-related late mortality were as follows: total late complications, .1.68o per patient-year: anticoagulant related hemorrhages, 0.92% per patient-year: thromboembolism, 0.61% per patient-year: paravalvular leakage, 0.15% per patient-year: reoperation, 0.15% per patient-year: and valve-related late mortalities, 0.61% per patient-year. Actuar al event free rate at 10 years was 87.4 $\pm$ 3.2%. The overall actuarial survival rate was 90.4$\pm$2.7% at 5 years, 87.5$\pm$3.3% at 10 years. Ninety eight percent of the survivors were in the New York Heart Association functional class I or II at the end of follow-up. There was significant improvement of cardiothoracic ratio. In conclusion, this study suggests the excellent durability of the St. Jude Medical Heart valve and remarkable functional benefit for the majority of the patients. However, prosthesisrelated complications are still common. Outcome is strongly related to the patient's preoperative cardiac condition and to the adequacy of anticoagulation control.

• The Journal of the Petrological Society of Korea
• /
• v.17 no.2
• /
• pp.108-131
• /
• 2008

The Miocene andesite and basalt intruded into and/or extruded on the Cretaceous volcanic and granitic rocks over the area of Chenjabong and Sirubong in the vicinity of Jinhae, southern part of Kyongsang basin. The K-Ar ages of the younger volcanic rocks are from 16 Ma (Sirubong andesite) to 10 Ma (Cheonjabong basalt), which indicate the Miocene volcanism in the outer part of the Tertiary basin in the Korean peninsula. The volcanics are divided into Chenjabong andesite, Cheonjabong basaltic andesite, Sirubong andesite and Cheonjabong basalt. The Cheonjabong andesite is composed of phenocrysts of clinopyroxene and plagioclase ($An_{60{\sim}64}$) and groundmass with lath-like plagioclase ($An_{76{\sim}84}$) and glass. The Cheonjabong basaltic andesite is composed of plagioclase phenocryst ($An_{60{\sim}64}$) with plagioclase lath ($An_{65}$) and glass in groundmass. The Sirubong andesite is only consisted of plagiocalse lath ($An_{64{\sim}68}$) and glass with absence of phonocryst. The Cheonjabong basalt shows typical porphyritic texture with phenocrysts of olivine ($Fo_{69-84}$) and clinopyroxene. The groundmass of the Cheonjabong basalt is composed of microphenocrysts of olivine, clinopyroxene and plagioclase ($An_{66{\sim}71}$) and plagioclase laths ($An_{57{\sim}65}$) showing pillotaxitic and intergranular texture. The Cheonjabong andesite, Cheonjabong basaltic andesite, Sirubong andesite are belong to calc-alkialine but the Cheonjabong basalt is alkaline basalt. By tectonic discrimination diagrams the parental magmas of the volcanic rocks have occurred boundary.

• Research in Community and Public Health Nursing
• /
• v.1 no.1
• /
• pp.172-173
• /
• 1989

본 연구는 전국의 보건진료원이 하는 업무를 분석하여 우리나라 보건진료원 제도 정착에 도움을 주는 기초자료를 제공하는 연구의 일환으로 강원도 지역에서 실시하였다. 연구대상은 강원도에 있는 보건진료원 전수로 하였고 이중 응답자수는 108명이었다. 연구도구는 문헌과 간호교육자들에 의해 작성 된 구조화된 설문지를 사용하였으며 수집된 자료는 SPSS를 이용하여 빈도, 백분율, 평균 및 피어슨 상관계수를 구하였고 유의성 검정을 위해서 t-test, ANOVA의 통계방법을 사용하였다. 본 연구결과를 통하여 얻은 결론은 다음과 같다. 1) 조사대상자인 보건진료원의 평균 연령이 31.5세이며 과반수의 보건진료원이 30세 미만 이었고 기혼자가 마혼자보다 약간 많았다. 보건진료원의 반수 이상이 현재 가족과 동거하고 있었고 학력은 3년제 간호전문대학 졸업자가, 경력은 3년 미만인 사람이 대부분이었으며 종교를 가진 사람이 대부분 이었으며 종교를 가진 사람이 안가진 사람보다 더 많았다. 또한 보건진료원의 근무지역 조건은 대부분이 을지에서 근무하고 있었고 대부분의 보건진료원이 신축된 보건진료소 시설에서 업무를 수행하고 보건진료소 내의 숙소에서 거주하는 것으로 냐타났다. 2) 보건진료원이 담당하는 평균 주민수는 1,660.8명 이었으며 과반수 정도의 보건진료원이 $501\sim1,000$명이 이상적인 적정 담당 주민수라고 생각하고 있었다. 강원도 주민의 연평균 보건진료소 이용자수는 4,099.3명 이었고 이용 주민수가 5,000명 이상인 보건진료소도 11개소 12.9 %나 되었다. 3) 보건진료소 사업대상지역 내에 있는 보건 의료기관은 약방 및 약종상이 62.1 %로 가장 많이 분포되어 있었고 보건지소도 16 %나 사업대상지역 내에 함께 있는 것으로 나타났다. 지역주민의 보건의료기관 이용은 보건진료소가 59.0 % 로 지역주민이 가장 많이 이용하고 있었고 보건 진료원이 가장 많이 이용하는 의뢰기관은 뱅 의원이 66 %, 보건소가 36.4 %로 나타났다. 또한 보건진료소의 보건의료기관과의 협조관계는 보건소와는 과반수 정도가 잘 협조하고 있다고 응답 한 반면 보건지소와 잘 협조하고 있다고 응답한 율은 37.6 % 밖에 안되었다. 4) 보건진료원이 업무영역 수행 정도를 살펴 보면 5점 만점에 통상질환관리가 3.69점, 사업 운영 관리 및 지도는 3.45점, 모자보건 및 가족계획은 3.28 점, 지역사회 조직 및 개발은 3.27 점, 보건정보체계 개발 및 수집은 3.17 점, 사업 계획 수립은 3.14 점, 지역사회 보건관리는 3.13 점의 순으로 나타났다. 보건진료원의 업무영역을 l 일 8 시간으로 하여 l 주 44 시간을 기준으로 측정하면 통상질환관리 18.56시간, 지역사회 보건관리 5.67 시간, 모자보건 및 가족계획 5.52 시간, 사업 운영관리 및 지도 4.10시간, 지역사회 조직 및 개발 3.05 시간, 보건정보체계 개발 및 수집 2.94 시간, 사업계획 수립 2.89시간의 순으로 나타났다. 5) 보건진료원의 업무영역별 수행 소요시간의 상판판계를 살펴보면 지역사펴 조직 및 개발을 위 해 소요한 시간은 사엽계획 수립 소요시간 및 보건정 보체계 관리 소요시간과 순상관관계를, 사업 계획 수립 소요시간은 지역사회 보건관리, 모자보건 및 가족계획 관리 소요시간 및 보건정보체제 관리 소요시간과 순상관관계를 나타냈다. 또한 통상질환관리 소요시간은 지역 사회 조직 및 개발, 사업계획 수립, 지역사회 보건관리와 모자보건 및 가족계획 관리, 사업운영 관리 및 지도, 보건정보체계 관리 소요시간과 역상관관계를 나타내었다. 6) 보건진료원의 총 업무수행 정도를 잘펴보면 업무수행 점수의 평균은 87.5점이었으며 보건진료원의 근무지가 병지이고 보건진료소의 시설상태가 나쁜 경우 업무수행 점수가 높은 것으로 나타났으며 업무수행 정도와는 별 차이가 없었다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.5
• /
• pp.689-700
• /
• 1996

Fisheries products have to be produced and maintained by work processes from the environment, sometimes helped by people. In Korean fisheries both environmental production and its economic use are included within the windows of system approach. EMERGY is the sum of all inputs expressed as one form of solar energy required directly and indirectly to make a product. Calculating EMERGY flows into Korean fisheries evaluates the real wealth contributed by environmental production and its economic use. Several indices calculated from EMERGY analysis table and a three-arm diagram give perspective on the type and efficiency of the environmental uses. Net EMERGY yield ratio is a measure of its net contribution to the economy beyond its own operation. For adjacent waters fisheries in Korea, the net contribution to the economy is 11.85 or higher, which is a stimulus to the economy that is able to purchase it. EMERGY investment ratio measures the intensity of the economic development and the loading of the environment. The ratio for Korean fisheries as a whole is 0.50, for the adjacent waters fisheries 0.09 and for the shallow-sea cultures 1.28, which is lower than the same index for the industry of the developed country (7.0). The component of environment drawn into production are large compared to purchased investment in Korean fisheries. Much more EMERGY is contained in fisheries products than in the paid services used to process the products. The EMERGY exchange ratio for Korean fisheries as a whole is 6.98, for the adjacent waters fisheries is 10.69 and for the shallow-sea cultures is 1.25. Using market values to evaluate wealth of environment resources is found to be many times too small. Money is paid only to people for their contribution, and never to the environment for its contribution. Macroeconomic value is the appropriate measure for discussing large-scale considerations of an economy, including environment and human goods & services.