• Proceedings of the KWS Conference
• /
• 2001.05a
• /
• pp.228-231
• /
• 2001

Elastic-plastic fracture toughness $J_{1c}$ can be used as an effective design criterion in elastic plastic fracture mechanics. Most of these systems are operated at high temperature and $J_{1c}$ values are affected by temperature. therefore, the $J_{1c}$ valuse at high temperature must be determined for use of integrity evaluation and designing of such systems. Elastic-plastic fracture toughness $J_{1c}$ tests were performed on SA516 carbon steel plate and test results were analyzed according to ASTM E 813-8, ASTM 1813-89. Safety and integrity are required for reactor pressure vessels vecause pthey are operated in high temperature. there are single specimen method, which used as evaluation of safety and integrity for reactor pressure vessels. In this study, elastic-plastic fracture toughness$(J_{1c})$ and $J-\Delta{a}$ of SA 516/70 steel used as reactor pressure vessel steel are measured and evaluated at room Temperature, $150^{\circ}C$, $250^{\circ}C$ and $370^{\circ}C$ according to unloading compliance method.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1186-1192
• /
• 1990

It is well known that the fatigue crack growth retardation following overloads can be estimated reasonably well by the models of Wheeler and Willenborg. These models, however, can not explain the delayed-retardation revealed by every experimental result. This means that they necessarily have some qualitative defects in themselves despite of a fair approximation of quantity. In fact, they did not take into account the effects of the compressive portion of the overload cycle such as the change of reversed plastic zone size. The present study is focused on the acceleration effect in the reversed plastic zone in order to analyze qualitatively delayed-retardation phenomenon following single peak overload on the fatigue crack growth behavior using 2024-T3 aluminum alloy.

• Journal of ILASS-Korea
• /
• v.5 no.3
• /
• pp.27-36
• /
• 2000

In this study, spray characteristics of a dual airblast atomizer are addressed. Three dimensional characteristics of a dual airblast atomizer with air swirl are measured to provide the significant data. The liquid flow rate was fixed at 0.06 kg/min, and atomizing air was controlled at the liquid-air mass ratio of 4.0. The performance of the spray with co-swirl and counter-swirl flow was investigated at each point in the developed spray region using a three-component phase Doppler particle analyzer. This instrument was also used to evaluate the concentration profiles. The three dimensional mean velocity were investigated of present flow characteristics of the dual airblast atomizer. In addition, drop size distributions, mean droplet size profile, and droplet concentration were analyzed to understand atomization characteristics. This experimental results can be conveniently utilized for the preliminary design of gas turbine engines for aircraft.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.685-686
• /
• 2006

Recently, various AR-based product design methodologies have been introduced. In this paper, we propose technologies for enhancing robust augmentation and immersive realization of virtual objects. A robust augmentation technology is developed for various lighting conditions and a partial solution is proposed for the hand occlusion problem that occurs when the virtual objects overlay the user' hands. It provides more immersive or natural images to the users. Finally, vibratory haptic cues by page motors as well as button clicking force feedback by modulating pneumatic pressures are proposed while interacting with virtual widgets. Also our system reduces gabs between modeling spaces and user spaces. An immersive game-phone model is selected to demonstrate that the users can control the direction of the car in the racing game by tilting a tangible object with the proposed augmented haptic and robust non-occluded visual feedback. The proposed methodologies will be contributed to the immersive realization of the conventional AR system.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.2
• /
• pp.99-104
• /
• 2001

Elastic-plastic fracture toughness $J_{lc}$ can be used as an effective design criterion in elastic plastic fracture mechanics. Most of these systems are$J_{lc}$ $J_{lc}$ value at high temperature must be determined for use of integrity evaluation and designing of such systems. Elastic-plastic fracture toughness $J_{lc}$ tests were performed on SA516/70 carbon steel plate and test results were analyzed according to ASTM E 813-87, ASTM E 813-89 and ASTM E 1152-87.safety and integrity are required for reactor pressure vessels because, they are operated in high temperature. There are single specimen method, which used as evaluation of safety and integrity for reactor pressure vessels. In this study, elastic-plastic fracture toughness($J_{lc}$) and J-$\Delta$a of SA 516/70 steel used as reactor pressure vessel steel are measured and evaluated at room temperature, 150$^{\circ}C $, 250$^{\circ}C $ and 370$^{\circ}C $ according to unloading compliance method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1192-1199
• /
• 2011

The purpose of this paper is to test empirically whether the sunk cost fallacy occurres or not under the two-part tarriff and to give the desirable rate-making for minimizing sunk cost fallacy. According to the results of analysis highly paid monthly fee makes more traffics over the level of optimal consumption because of sunk cost fallacy. Therefore monthly fee reduction will cause the optimal consumption that is near the solution of their own utility function.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.228-231
• /
• 2019

'계시별 요금제'는 하계·동계·춘추계의 계절별과 경부하·중간 부하·최대부하의 시간대별로 구분하여 전기요금을 차등 적용하는 것을 말한다. 수요관리 및 소비자 선택권 확대 목적으로 미국·영국·프랑스 등 주요국에서 주택용 전기요금의 하나로 시행 주이다. 그러나 국내에서는 산업용, 일반용 소비자에게는 계시별 요금제를 적용 중이지만, 아직까지 주택용 전기요금에는 계시제가 도입되지 않은 상태이다. 하지만 정부가 현재 시행중인 전기요금 누진제도의 대안으로 계절과 시간대에 따라 요금을 부과하는 '계시별 요금제' 도입을 추진할 예정이다. 이는 소비자의 합리적인 전기 소비를 유도해 각 가정의 전기료 부담을 줄이고, 누진제 완화로 악하된 한국전력공사의 재정 부담도 줄이겠다는 취지이다. 그러나 신 요금제 도입에 따른 전기료 인상 논란 여기 이어질 전망이다. 따라서 본 연구에서는 첫째 현행 '누진제 요금제'와 새로 도입될 '계시별 요금제'에 따른 소비자 전기요금의 변화에 대해 살펴보고, 둘째 가정용 ESS 도입에 따른 전기료 절감에 대하여 검토한 후, 마지막으로 계시별 요금제 도입에 따른 효율적인 ESS 도입 및 운영과 시범 적용 예정인 계시별 요금제에 대한 개선 방향에 대하여 간략히 살펴보고자 한다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.8
• /
• pp.577-584
• /
• 2003

Traditional ankle rehabilitation procedures are tedious, repetitive, and require therapist's help. Therefore, they do not provide patients with good motivation to actively participate in the rehabilitation exercises. In addition, objective diagnosis and evaluation of the treatment progress have been difficult because records of exercise history are made by passive instruments from time to time. The virtual reality technology can make these procedures more fun so that patients can perform everyday rehabilitation exercises more actively. Moreover, haptics technology can give active resistance to the patients ankle motion to improve strength of muscles as well as can record ankle's motion and force histories for objective diagnosis and evaluation. This paper summarizes development of a virtual environment fur reforming the conventional ankle rehabilitation procedures. First of all, conventional rehabilitation procedures have been summarized. Secondly, haptic design and control, user interface design, virtual environment contents design are described. Lastly, mutual cooperation among many developers including medical doctors and therapists and future works are commented.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.6 s.61
• /
• pp.58-69
• /
• 2004

In order to investigate the characteristics of the lateral earth pressure at rest, under hysteretic $K_o-loading/unloading$ conditions, seven types of multi-cyclic models have been studied, using dry sand. For this study, the new type of $K_o-oedometer$ apparatus was developed, and the horizontal pressure was accurately measured. The multi-cyclic models consist of primarily 3 cases: (i) $K_o-test$ under the same loading / unloading condition, (ii) multi-cyclic loading / unloading $K_o-test$ exceeding the maximum pre-vertical stress, and (iii) multi-cyclic loading / unloading $K_o-test$ within the maximum pre-vertical stress. Results fromthe multi-cyclic model indicated that a single-cyclic model could be extended if the exponents for the unloading condition $(\alpha\;and\;\alpha^*)$ and the reloading coefficients $(m_r,\;and\;m_r^{\ast})$ were primarily dependent upon the type of model, number of cycles, and the relative density.

• Environmental and Resource Economics Review
• /
• v.4 no.2
• /
• pp.243-265
• /
• 1995

본 논문은 Rogerson의 실질불변감모상각방식 (Real Constant Amortization Schedule)이 가격상한규제 (price-cap regulation)하에서도 사회적으로 최적인가를 규명하는 것을 목적으로 한다. 실질불변감모상각방식이란 피규제기업의 현금의 흐름 (cash flow) - 요율기저에 대한 공정보수와 감가상각액의 합계 - 의 실질가치가 매기에 일정하도록 해 주는 감모상각방식으로서, 이 방식을 사용할 경우 기업은 규제시차의 길이에 관계 없이 최척의 자본-노동비율을 달성하려 한다는 것이다. 실질불변감모상각방식은 통상 사용되는 감모상각방식보다 느린 속도로 자산의 가치를 줄여 나아가는 것으로 알려져 있다. 가격상한규제에 관한 단순한 모형을 구축하여 분석해 본 결과, 수요가 비탄력적일 경우 실질불변감모상각방식은 가격상한규제하에서도 최적자본-노동비율을 유도하며, 가격상한규제는 규제메카니즘에 있어서 투자보수율규제와 유사하다는 결론을 얻을 수 있었다. 그러나, 가격상한규제에 있어서는 소매물가지수의 상승률뿐만 아니라 피규제기업의 효율성제고 효과가 소비자가격의 인하로 나타나는 메카니즘도 중시되고 있다. 즉, RPI-X룰에서 X에 해당하는 부분으로서, 이는 내부효율성의 향상 이외에 기술진보속도도 반영하는데, 이러한 기술진보는 가격상한의 인하요인으로 작용하므로, 피규제기업의 입장에서는 감가상각속도의 적절한 설정이 없는 한 기술진보의 유인이 줄어들 수도 있다. 따라서 기술진보속도와 최적감가상각속도의 관계를 단순한 모형을 확장하여 살펴보았는데, 기술진보속도가 빠를수록 감가상각속도도 빨라져야 한다는 결과가 도출되었다.