• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.6
• /
• pp.7-16
• /
• 2000

정밀공학에서 측정은 필수적인 의미를 갖는다. 측정할 수 없는 제품 치수는 체계적인 가공이 불가능하며, 이는 설사 가공자의 특수한 기능에 의해 가공이 되더라도 체계적인 양산방식에 의한 생산이 될 수 없음을 의미한다. 이러한 중요성을 갖는 측정기술은 가공기술의 발랄과 더불어 꾸준한 진보를 이루어 왔다.(중략)

• Proceedings of the Costume Culture Conference
• /
• 2003.09a
• /
• pp.95-96
• /
• 2003

오늘날 여성은 고학력화와 더불어 여성 전문직 비율 증가, 직장에서의 승진기회 확대, 소득증가, 미혼여성의 급증, 결혼 연령의 증가 등으로 과거와는 달리 사회참여의 기회가 다양하게 증가하고 있다. 이에 따라 여성 중에 기혼 여성은 가정용 전자제품의 발달로 육아노동 및 가사노동의 감소 및 낮은 출산율을 보이고 있고, 미혼여성의 비율은 증가하는 추세에 있다. (중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.275-276
• /
• 2007

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.7
• /
• pp.723-730
• /
• 2012

During the cold wire-drawing process, the diameter of a wire is reduced and the length of the wire is increased as the wire passes through the die. The pressure and sliding motion at the interface between the wire and die cause elastic recovery of the workpiece and friction and wear on the die. In addition, wire deformation and frictional heating raise the temperature of the wire and die, resulting in difficulty in manufacturing the drawn products according to a designated inner diameter of the die, deviating from the designated dimension or the inner diameter of the die. In this study, considering the die temperature distribution, the effects of dimensional changes of the drawn products were analyzed quantitatively; these changes are caused by the elastic deformation of the die, the elastic recovery of the workpiece, and the thermal deformation of both the die and the workpiece. It was confirmed that the elastic recovery of the workpiece influenced these changes the most. The initial dies considering these factors could avoid deviation from the designated dimension, and the desired drawn products were obtained by using the designed initial drawing dies.

• Journal of the Korean Home Economics Association
• /
• v.49 no.10
• /
• pp.49-56
• /
• 2011

The purpose of this study is to research the difference between the size suggested by brand uniforms and the size suitable for high school girls. We compared and analyzed the size system of brand uniforms after researching the wearing conditions of uniforms of 4 brands (A, B, C, D) in order to establish a size system of brand uniforms that fits different body types of teenagers. First, we conduct research on the actual condition of brand uniforms worn by high school girls, and investigate unsatisfactory factors and problems. Second, we actually measure the uniform size of each brand and analyze measurement differences between each brand. Our results show each brand uniform has different size specifications and the importance of appropriate size specification is greater as students select uniform based on design and brand awareness rather than body size. Compared with the average body size the skirt and especially the blouse is much smaller with no extra room compared with standard size 85 blouses and size 71 skirts. Therefore, the adjustment of size specification is needed in brand school uniforms. However, a larger scale investigation is needed as this study was conducted with a limited sample size.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.6
• /
• pp.474-480
• /
• 2008

Recently, rods having irregular sections more complex than a rectangle or ellipse are necessary to produce mechanical parts. The cold shaped drawing process is used to obtain shaped drawn products with high levels of dimensional accuracy and quality. A cross roller guide, considered in this study, is one of the parts produced by shaped drawing process. A cross roller guide has a linear bearing system that rolls along a guide way. A cross roller guide is one of the most important components in terms of equipment because the quality of the product influences the precision linear motion. Therefore, the final dimensional accuracy of the linear rail in the shaped drawing is very important. The objective of this study is to find the optimized die angles to improve the dimensional accuracy and straightness of the final shaped drawn product. In order to achieve the aim of this study, design of experiment, FE-simulation, and the Taguchi method were used. Based on the analytical results, shaped drawing experiment has been performed to verify the result.

• Polymer(Korea)
• /
• v.32 no.6
• /
• pp.501-508
• /
• 2008

Small injection molded articles such as lens and mobile product parts are usually molded in multi-cavity mold. The problem occurring in multi-cavity molding is flow unbalance among the cavities. The flow unbalance affects the dimensions and physical properties of molded articles. First of all, the origin of flow unbalance is geometrical unbalance of the delivery system. However, even the geometry of the delivery system is well balanced, cavity unbalance occurs. This comes from the temperature distributions in the cross-section of runner. Temperature distribution depends upon injection speed because heat generation near runner wall is high at high injection speed. Among the operational conditions, injection speed is the most significant process variable affecting the filling unbalances in multi-cavity injection molding. In this study, experimental study of flow unbalance has been conducted for various injection speeds and materials. Also, the filling unbalances were compared with CAE results. The dimensions and weights of multi-cavity molded parts were examined. The results showed that the filling unbalances vary according to the injection speeds and resins. Subsequently, the unbalanced filling and pressure distribution in the multi-cavity affect the dimensions and physical states of molded parts.

• Journal of the Korean Society of Costume
• /
• v.52 no.3
• /
• pp.29-47
• /
• 2002

이 연구에서는 대량생산의 장점인 낮은 가격대 창출과 주문생산의 장점인 고객지향을 추구하는 매스 커스터마이제이션(Mass Customization) 방식에 따른 의류제품의 생산모델을 개발하였다. 특히 체형이 매우 다양한 시기에 있어 이러한 고객지향적 의복이 더욱 필요한 중년여성들을 대상으로 하여 기성복에서 얻을 수 없는 인체적합도가 높은 의복을 생산할 수 있도록 하였다. 이 모델은 소비자 체형파악과 체형별 패턴제작의 어려움을 해결해주기 때문에 의류제조업체의 패턴제작과정을 용이하게 해주고, 모든 생산이 주문에 따라 이루어지므로 재고부담을 감소시키게 된다. 생산모델은 크게 5 단계로 나뉜다. 1 단계는 소비자가 제품에 대한 정보를 얻어 선택을 하는 단계이고, 2 단계는 소비자의 신체치수 계측 및 입력, 체형판별의 단계이다. 1) 단계에서는 이러한 내용을 포함하는 주문서를 작성하여 본사로 전송하고. 4 단계에서는 제품을 생산한다. 그리고 5 단계는 제품의 배송 단계이다. 이 연구에서 실질적으로 검증한 매스 커스터마이제이션 의류제품의 생산과정은 주문단계에서 패턴의 수정 단계까지이며, 이후의 마커제작에서 배송단계까지는 생산설비상의 문제 때문에 설명으로 제시하였다. 또한 매스 커스터마이제이션 의류제품에서 특히 중요한 단계는 고객에 대학 접근방법과 가봉 없이도 인체적합도가 높은 의복을 생산하는 것이므로 이 연구에서는 이를 중심으로 다루었다.

• Journal of Korean Association for Spatial Structures
• /
• v.9 no.4
• /
• pp.89-96
• /
• 2009

Apartment is the most favorite residential type which already occupies more than 50 percent of total number of housing unite in Korea. The interior space design shows various changes of trends within old and legal standard in terms of basic dimension. The most important function of housing means that Provides comfortable living spaces for a family and enjoying relaxation of stress form social activities. This residential space effects direct or indirect to each family members self-satisfaction and relationship. The basic factor for space design brings dimension which is enable space efficiency together with behavioral route, size of electronics and furnitures. Apartment dwelling type was introduced from out of countries. From the very beginning that inharmonious conflicts found and adjusted for several decades. But, the changes of body conditions of new generation has not considered as a dwelling space design yet. This research may call for attention of changing human scale standards for housing in various field of study.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.5
• /
• pp.511-517
• /
• 2016

Anthropometric data of the hand is one of the important issues for the product design related with hand and manual operation in terms of user-centered design. Direct measurement, which traditionally uses anthropometric measuring tool, has a few disadvantages in cumulation of measuring time, possible errors in raw data, doubtful reliability between inspectors. Newly introduced 3D scanning technology overcomes those disadvantages; however, another disadvantages, such as, hight cost and immovability, have been introduced. In this study, photogrammetric approach was introduced for the measurement of anthropometric data in hand. In order to minimize the possibility of error during direct and indirect measurement, a simulated object was used and effectiveness of photogrametric measurement was confirmed for the collection of anthropometric data in hand.