• 한국항공운항학회지
• /
• 제23권2호
• /
• pp.7-14
• /
• 2015

This paper deals with an optimal determination process for the built-in location of localizer under restrictive siting area conditions of a domestic P-airport. Aerodynamic forces and moments acting on the localizer structure can be used a reference to find the safe distance from jet blast and the position at which the reasonable structural loading is applied. Wind tunnel experiment is conducted to measure aerodynamic loadings. The finite element analysis for structural deformation is employed to get the information of structural failure. A new localizer's position is determined by considering aerodynamic loading, structural strength and thermal loading due to jet blast. Deflector effect was also investigated in this study. In conclusion, the location of localizer can be placed at shorter than the current position and greatly decreased if the deflector is applied at the front of localizer.

• 한국전산유체공학회지
• /
• 제14권2호
• /
• pp.32-38
• /
• 2009

In the present study, a numerical simulation for the diffusion of hydrogen jet in a enclosure was performed to aid the leakage test of the hydrogen for the safety of the hydrogen vehicle. The temporal and spatial distributions of the hydrogen concentration in the test chamber are predicted from the present numerical analyses. Flammable region of 4-74% and explosive region of 18-59% hydrogen by volume was identified from the present results. Factors influencing the diffusion of the hydrogen jet were examined to evaluate the effectiveness of forced ventilation for relieving the accumulation of the leaked hydrogen gas in the chamber, which include location of open windows, size of leakage nozzle, and leakage rate among others. The distribution of the concentration of the leaked hydrogen for various cases can be used as a database in various applications for the hydrogen safety.

• 한국수소및신에너지학회논문집
• /
• 제30권3호
• /
• pp.243-250
• /
• 2019

In this study, to ensure the safety of the packaged hydrogen refueling system, the improvement plan was derived by using 3-dimensional CFD program (FLACS). We also confirmed the effectiveness of risk reduction and the suitability of safety standard. By ventilation performance evaluation according to the position of the vent, it demonstrated that the vent should be installed at the ceiling to safely ventilate without stagnation of the leaked gas. In case of ventilation system according to KGS standard, risk situation could be resolved after about 5 minutes in the worst leaked condition. The result showed that jet fire and explosion inside the packaged system could affect the surrounding facilities. This proves that the standard for installing flame detectors, emergency shut down system and protection wall is appropriate.

• 한국터널지하공간학회 논문집
• /
• 제16권1호
• /
• pp.105-115
• /
• 2014

터널내의 연기거동 및 대피안전성을 평가하기 위하여 수치해석을 수행하였다. 본 연구의 목적은 최근 더욱 길어지고 있는 장대터널의 화재로 인한 연기 및 온도 분포와 안전성을 평가할 수 있는 수치적 방법을 구현하는데 있다. 계산에 사용되는 컴퓨터자원을 최소화하기 위하여 모델로 선정한 터널의 전체길이인 3 km을 사용하는 대신 여러 개의 대피터널이 포함되는 1.5 km만을 해석영역으로 사용하였다. 터널내의 연기거동에 의한 대피자의 안전성을 평가하기 위하여 연기의 밀도에 의한 기시도와 바닥으로부터의 높이를 고려한 SE (smoke environment)값을 사용하였다. 공기 중에 포함된 연기의 밀도는 3차원 전산유체역학을 통하여 구하였다. 이러한 연기 거동에 영향을 미치는 온도분포를 정확하게 모사하기 위하여 터널 벽면을 단열 혹은 일정한 열유속(heat flux) 가정을 사용하는 대신 1차원 열전도(heat conduction)방정식을 이용하여 터널벽면의 온도를 계산하였다. 대피터널간의 거리가 가까울수록 대피자의 안전성은 높아지겠지만 상대적으로 건설비용이 증가하게 된다. 본 연구에서 대피터널의 길이는 250 m로 하였으며 화재 시 제연팬의 운전 조건을 3가지 (팬이 가동되지 않는 조건, 임계풍속이하조건, 임계풍속이상조건)로 나누어 연기의 거동과 온도분포를 고찰하였다. 그리고 화재가 발생한 시간부터 플래쉬오버가 발생한 시간까지의 연기의 거동과 대피자의 상황을 SE를 이용하여 고찰하였다.

• 한국터널지하공간학회 논문집
• /
• 제20권6호
• /
• pp.917-930
• /
• 2018

도로터널의 방재시설 설계에 화재 위험을 정량적으로 평가하기 위한 정량적 위험도 평가기법이 소방시설물에 대한 성능위주 설계의 일환으로 도입되어 전차종이 통과하는 대단면 터널에 대한 방재시설의 적정성을 평가하는데 활용되고 있다. 그러나 현재 도로 터널에 도입하고 있는 정량적 위험도 평가기법은 대단면 터널에만 적용이 가능하기 때문에 최근 건설이나 계획이 증가하는 소형차 전용 도로터널에 대한 정량적 위험도 평가기법의 개발 필요성이 대두되게 되었다. 이에 본 연구에서는 기존의 터널에 대한 정량적 위험도 평가기법을 기반으로 하여 소형차 전용 도로터널에 적합한 화재발생 시나리오를 제시하고 소형차 전용의 모델터널에 대해서 피난연결통로 간격에 따른 위험도를 분석하고 적용성을 검토하였다. 그 결과로 소형차 전용도로터널의 경우, 현행 사회적 위험도 평가기준을 만족하기 위한 피난연결통로의 적정 간격은 200 m로 평가되었다. 또한 소형차 전용터널에 대한 제배연방식에 따른 위험도를 비교한 결과, 제트팬에 의해서 기류제어가 가능한 대배기구방식이 피난안전확보에 효과적인 것으로 분석되었다.

• 설비공학논문집
• /
• 제12권12호
• /
• pp.1098-1125
• /
• 2000

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 1998 and 1999 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. 1) A review of the recent studies on fluid flow, turbomachinery and pipe-network shows that many experimental investigations are conducted in applications of impingement jets. Researches on turbulent flows, pipe flows, pipe-networks are focused on analyses of practical systems and prediction of system performance. The results of noise reduction in the turbomachinery are also reported. 2) A review of the recent studies on heat transfer analysis and heat exchanger shows that there were many papers on the channel flow with the application to the design of heat exchanger in the heat transfer analysis. Various experimental and numerical papers on heat exchanger were also published, however, there were few papers available for the analysis of whole system including heat exchanger. 3) A review of the recent studies on heat pump system have focused on the multi-type system and the heat pump cycle to utilize treated sewage as the heat source. The defrosting and the frosting behaviors in the fin-tube heat exchanger is experimentally examined by several authors. Several papers on the ice storage cooling system are presented to show the dynamic simulation program and optimal operation conditions. The study on the micro heat pipes for the cooling of high power electronic components is carried out to examine the characteristics of heat and mass transfer processed. In addition to these, new type of separate thermosyphon is studied experimentally. 4) The recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. New systems operating with natural refrigerants are drawing lots of attention. In addition to these, evaporation and condensation heat transfer characteristics of traditional and new refrigerants are investigated for plain tubes and also for microfin tubes. Capillary tubes and orifice are main topics of research as expansion devices and studies on thermophysical properties of new refrigerants and refrigerant/oil mixtures are widely carried out. 5) A review of the recent studies on absorption cooling system shows that numerous experimental and analytical studies on the improvement of absorber performance have been presented. Dynamic analysis of compressor have been performed to understand its vibration characteristics. However research works on tow-phase flow and heat transfer, which could be encountered in the refrigeration system and various phase-change heat exchanger, were seemed to be insufficient. 6) A review of recent studies on duct system shows that the methods for circuit analysis, and flow balancing have been presented. Researches on ventilation are focused on the measurement of ventilation efficiency, and variation of ventilation efficiency with ventilation methods by numerous experimental and numerical studies. Furthermore, many studies have been conducted in real building in order to estimate indoor thermal environments. Many research works to get some information for cooling tower design have been performed but are insufficient. 7) A review on the recent studies on architectural thermal environment and building mechanical systems design shows that thermal comfort analysis is sitting environment, thermal performance analysis of Korean traditional building structures., and evaluation of building environmental load have been performed. However research works to improve the performance of mechanical system design and construction technology were seemed to be insufficient.