• Journal of Korean Society on Water Environment
• /
• v.26 no.3
• /
• pp.377-386
• /
• 2010

Introduction of TBELs into Korean environmental regulatory system for wastewater may require very careful considerations and appropriate modifications of the TBELs applied in US. The Korean regulations for wastewater are based on uniform regulatory criteria for wastewater effluent discharge and are quite different from the individual permit system in US. In addition, the toxic pollutants regulated in Korea are much less than those in US. Therefore, the effects of TBELs application on the pollutants reduction and the economic feasibility should be carefully assessed for different categories of wastewater sources. In this study, the applicability of TBELs for the industrial categories of Korea was discussed. The TBELs were derived for a sample category, the pulp paper paperboard manufacture, based on the previously reported analytical data from 52 facilities of the domestic pulp paper paperboard manufacture in Korea. It was suggested that the BAT effluent limitations were BOD 30 mg/L, $COD_{Mn}$ 40 mg/L, SS 40 mg/L, T-N 30 mg/L and T-P 4 mg/L and that the allowable effluent loads were $0.31{\sim}1.75kgCOD_{Mn}/ton$-products. Due to the limitation of insufficient data, there were difficult to obtain the important factors to derive more systematic and accurate limitation standards for the pollutants such as the 'Long Term Average (LTA)', the 'Product Normalized Discharge Flow (PNDF)', and the 'Variability Factor (VF)'. However, as the first trial of TBELs determination based on the all available analytical data reported, the procedure and the outcome of the study may provide valuable insight on application of TBELs in Korea.

• Journal of the Korean Magnetics Society
• /
• v.1 no.1
• /
• pp.17-24
• /
• 1991

Laves phases of $NdFe_2$, $Nd{(Fe_{0.5})}_2$, $SmCo_2$ and $Sm{(Fe_{0.5}Co_{0.5})}_2$ stoichiometry were prepared using a rapid solidification technology. Low temperature magnetic properties show ferromagnetic behaviors for the $Nd{(Fe_{0.5}Co_{0.5})}_2$, $SmCo_2$ and $Sm{(Fe_{0.5}Co_{0.5})}_2$Nd(Feo,Coo,) Laves compounds while a sort of spin reorientation has been suggested for the supposed composition of $NdFe_2$ alloy. This rapidly solidified $NdFe_2$ alloy is believed to consist of metastable rhombohedral $NdFe_7$ phase plus fine particles of Nd-rich phase. Some evidence of phase transition from the mixture of unstable $NdFe_7$ compound plus Nd-rich to $Nd_2Fe_{17}$ plus Fe-Nd-O phase was obtained after annealing the $NdFe_2$, alloy. The pseudo-binary Laves compound, $Sm{(Fe_{0.5}Co_{0.5})}_2$ exhibits a high coercivityof 4 kOe at room temperature with Curie temperature of $400^{\circ}C$ while the $Nd{(Fe_{0.5}Co_{0.5})}_2$ compound shows a magnetic moment of $2.8\;{\mu}_B/f.u.$.

• Journal of Digital Convergence
• /
• v.11 no.6
• /
• pp.91-101
• /
• 2013

The purpose of this study is to empirically verify the relationship between supply chain flexibility(process flexibility and logistics flexibility) and competitive advantage strategy(cost, quality, lead time). To accomplish these purposes, the relationships among supply chain flexibility(process, logistics), competitive advantage strategy(cost, quality, lead time) were modeled based on the studies conducted in the various areas. In order to collect the related data the questionaries of 500 were distributed to the employees working at the manufacturing industry in the area of Gumi. The collected data were analyzed with SPSS 18.0 for Windows. This study used the statistical techniques such as descriptive analysis, reliability analysis, factor analysis, correlation analysis, multi regression analysis. The results of the study show that process flexibility had positively significant effect on low cost strategy and high quality strategy and logistic flexibility have positively significant effect on delivery speed strategy. However, it was found that process flexibility did not have the significant effect on delivery speed strategy, and the logistic flexibility did not have the significant effect on low cost and high quality strategy. Thus, it is expected that each enterprise can maximize corporate strategies by applying different flexibility strategy depending on the competitive advantage strategy.

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.1050-1056
• /
• 1999

The effect of ${\gamma}-irradiation$ was investigated on salted and fermented squid, squid jeotkal. Squid jeotkal was prepared with salt concentrations of 5%, 10% and 20% and was fermented at $15^{\circ}C$ and $25^{\circ}C$ after ${\gamma}-irradiation$ with doses of 0, 2.5, 5 and 10 kGy, respectively. Proximate composition, salinity, water activity (Aw), pH, total bacteria and sensory evaluation were examined during fermentation periods. Results showed that ${\gamma}-irradiation$ had no effect on proximate composition, salinity and Aw compared with non-irradiated squid jeotkal. However, pH and total bacteria, as well as sensory evaluation, were changed variously with processing conditions such as NaCl concentration, irradiation dose and fermentation temperature. The results of total bacteria and sensory evaluation showed that squid jeotkal with NaCl concentration of 10% and an irradiation dose of 10 kGy maintained high quality for 30 days at $15^{\circ}C$. Therefore, it was considered that ${\gamma}-irradiation$ was effective in processing low-salted squid jeotkal and extending its shelf-life without adding any food additives.

• Journal of Korean Society of Forest Science
• /
• v.61 no.1
• /
• pp.27-36
• /
• 1983

This study was performed to get the basic information on nitric acid pulping of beech wood. In order to reduce the consumption of nitric acid, alkali pretreated woods were applied to a nitric acid pulping process. It consisted of nitric acid treatment to a high residual lignin content and the subsequent delignification with alkali, required far less chemical than the single stage method. At the first stage of nitric pulping, pulp yield descreased with increasing cooking time and 3 percent of nitric acid was more effective on the delignification of wood than 1 or 2 percent. Alkali pretreatment of wood improved significantly the rate of delignification, and 79 percent of the pretreated yield was good enough for excellent delignification. The dissolution of carbohydrate (mainly xylose) was increased with increasing cooking time, especially at the second stage. It would be considered that carbonyl groups introduced to polysaccharides in wood by nitric acid oxidation caused the degradation of carbohydrates.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.313-321
• /
• 2017

We aimed to develop commercialization process of encapsulation which is superior in productivity compared to existing methods by using sodium alginate. Also, in the same process, sodium alginate with chitosan was used to encapsulate lactic acid bacteria with the same process and then the viable cell counts of the two encapsulated lactic acid bacteria were compared. As a test result of the fluidized drying process developed by the present researchers, it was found that the drying time was shortened by 15 to 20 hours compared to the freeze drying method, but the number of viable lactic acid bacteria was about 75% as compared with freeze drying. However, considering the cost and time of drying, it can be confirmed that the commercialization process is possible by the fluidized bed drying method. When the number of viable cells of Ca-alginate capsule and Chitosan-alginate capsule were compared, it was confirmed that there were about $1{\times}10^9$ or more bacteria in the former and about $1{\times}10^3$ in the latter. The lactic acid bacterium capsules prepared by the present technique were stable for 96 hours or more at pH 4.65 and 6.01, but disappeared within 1 hour at pH 7.07 and 8.35. This suggests that the disintegration of lactic acid bacteria can be easily occurred in small and large intestine.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.306-306
• /
• 2010

21 세기는 언제, 어디에서, 누구나가 정보를 자유롭게 염가에 이용할 수 있는 유비쿼터스 정보사회가 될 것으로 예상하고 있다. 이러한 유비쿼터스 사회가 실현되기 위해서는 필연적으로 대두되고 있는 과제가 에너지 공급원의 문제이다. 휴대용 전자제품이나 소형 에너지 공급원으로 지금까지 주로 전지가 사용되어 왔지만 이것들은 교환 및 충전이 불가피하다. 이러한 불편함을 개선하기위해 교환과 충전이 불필요하거나 아주 장시간동안 공급해주는 형태의 에너지 공급원의 필요성이 대두되고 있다. 이러한 에너지 공급원으로 최근에 많은 연구가 되고 있는 것이 주위의 환경으로부터 버려지는 에너지를 수확(harvesting)하여 전력으로 변환하는 에너지 하베스팅 (energy harvesting)기술이 연구 개발되고 있다. 에너지 하베스팅 응용을 위해서 사용되어지는 압전 세라믹스는 전압출력계수 ($g_{33}$)가 커야하는데 이것은 압전상수 ($d_{33}$)와 유전상수 (${\varepsilon}_{\tau}$)의 값에 영향을 받는 것으로 알려져있다. 그 중에서 우수한 전기적 특성 때문에 PZT를 기반으로 하는 압전 세라믹스가 사용되어져왔다. 그러나 Pb의 높은 유독성과 Pb를 포함하는 제품들의 처분문제들로 인해 제조에 관한 많은 문제점들을 지니고있다. 그리하여, Pb를 포함하지 않는 Pb-free계에 관한 연구가 전세계적으로 활발히 진행되고 있다. 다양한 Pb-free계 후보자들 가운데 $K_{0.5}Na_{0.5}NbO_3$ (KNN)는 높은 큐리온도와 좋은 강유전 특성 및 압전특성 때문에 PZT를 대체할 가장 장래성있는 대안들 중의 하나로 고려되고 있다. 그러나 고온에서 알칼라인 원소들의 높은 휘발성 때문에 보통의 소결공정으로는 소결이 잘되고 치밀한 세라믹스를 얻기가 어렵다. 많은 연구에서 KNN 세라믹스의 소결성을 개선하기 위하여 강유전 또는 반강유전체인 $SrTiP_3$와 $LiTaO_3$를 고용체 형성에 포함시키고 또한 $K_4CuNb_8O_{23}$, $MnO_2$, CuO등과 같은 소결조제를 첨가하여 압전 특성과 소결성을 개선시켰다. 따라서 본 연구에서는 비화학양론적 (1-X)[$[(K_{0.5}Na_{0.5}]_{0.97}(Nb_{0.96}Sb_{0.04})O_3]$ + 0.008CuO + 0.2wt% $Ag_2O$ + X $CeMnO_3$의 조성을 사용하여 A사이트와 B 사이트에 각각 Ce이온과 Mn 이온의 치환량을 변화하여 그에 따른 유전 및 압전특성을 조사하였다.

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.840-847
• /
• 2003

Recently, the coal-ash production has been increased by increase of consumption of electric power. So it is important to secure a reclaimed land and treatment utility for coal-ash. This is an experimental study to compare and analyze the engineering properties of concrete according to W/C and replacement ratio of bottom ash. For this purpose, the mix proportions of concrete according to W/C(40, 50, 60%) and replacement ratio of bottom ash(0, 10, 20, 35, 50%) were established, and then tested for slump, chloride content, setting time, bleeding content, compressive strength. Also the durability test of concrete with W/E 60% was performed. According to test results, it was found that the bleeding content of concrete decreased as the replacement ratio of bottom ash increased. And the chloride content of concrete using the bottom ash increased as the replacement ratio of bottom ash increased, but it is satisfied with the chloride content of fresh concrete $0.30kg/m^3$ below("concrete standard specification" regulation value). The compressive strength of concrete using the bottom ash was similar to that of BA0 concrete after 28 days of curing and the carbonation depth of concrete was increased according to increase of the replacement ratio of bottom ash.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.20-40
• /
• 2003

Since unloaded Q-value of a high-temperature superconductor(HTS) filter is very high, a bandpass filter(BPF) and a lowpass filter(LPF) with an increase of pole numbers can be fabricated without an increase of an insertion loss(IL) ; recently a 70-pole BPF is developed in USA. They have an abrupt skirt property and an excellent attenuation level for out-of band. Moreover, they can be miniaturized when lumped element resonators or the slow-wave characteristic are used. Technology of fabricating a HTS epitaxial film as well as a film of a 4 inch area also makes the planar type filter with a various structure and an enhanced power handling capability possible. Recently, the HTS filter subsystems composed of a planar-type HTS filters, a GaAs-based LNA and a mini-cryocooler are developed. The extended receiver front- end subsystems for mobile radio communications decrease the noise-figure level of the communication system and the frequency interference interacted adjacent bands, and increase the efficiency of frequency and the capacity of communication system. In this paper, theory for developing the HTS filter, its kinds, its design rules, its characteristics are reviewed. The feature of the research and market trends related to the HTS filter systems for the receiver front-end subsystem of mobile base station are surveyed.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.63-69
• /
• 2003

90년대부터 많은 ERP를 도입하여 회사의 전체 업무를 통합시키고 실시간으로 모든 업무를 동시에 처리함에 따라 경영환경과 정보기술의 급격한 변화에 대처하고 있다. 이러한 ERP 시스템을 도입하던 기존의 업무 수행절차와 방법대신 ERP 패키지가 제공하는 프로세스와 기능을 적용하여 기업 내 업무기능을 혁신한다는 특징을 가지고 있어 조직변화를 수반하게 된다. 따라서 효과적인 ERP 구면을 위해서는 기업의 환경에 적절한 구축방법을 정하고 변화관리 이행 프로그램을 필요로 하고 있다. 본 연구에서는 ERP를 구축하는데 어떠한 조직적 환경요인이 영향을 미지고. ERP 구축방법에 따라 변화관리의 특성이 어떻게 달라지며. 변화관리가 ERP 성과에 어떠한 영향을 미치는지 파악하기 위한 프레임워크를 제시하고 이틀 근간으로 하여 상이한 구축방법을 통하여 ERP틀 구면탄 두 기업을 대상으로 심도있게 비교 분석함으로써 ERP 구축환경의 특성과 ERP 구축방법에 따른 변화관리 특성 및 ERP성과를 살펴보았다. 연구결과 ERP 구축방법은 ERP 구축환경에 따라 차이를 보였으며, ERP 구축 방법에 따라서 변화기법이 달라진다는 사실을 알 수 있었다. 그러나 변화관리 방법 중에서도 최고 경영자의 리더십과 현업 직원의 적극적인 참여 및 전사적인 커뮤니케이션은 ERP 구축방법과 관계없이 중요한 요인으로 나타났다. 그리고 ERP 구축방법에 있어서 변화관리 활동은 ERP 성과에 긍정적인 영향을 미쳤다. 본 사례연구로 얻은 시사점은 ERP의 구현하고자 하는 국내 기업들이 ERP 구축방법을 선정하고 적합탄 변화관리 방법의 전개를 위하여 실질적인 도움을 줄 것이다.6 전문가 그룹을 통해 시범적으로 적응하는 것으로 시작해, 학교 및 연구소를 통한 정보지식 공유 그리고 기업 정보화 솔루션으로 활용 될 수 있다.을 제시한다. 이렇게 함으로써 최대한 고객 납기를 만족하도록 계획을 수립할 수 있게 된다. 본 논문에서 제시하는 계획 모델을 사용함으로써 고객 주문에 대한 대응력을 높일 수 있고, 계획의 투명성으로 인한 전체 공급망의Bullwhip effect를 감소시킬 수 있는 장점이 있다. 동시에 이것은 향후 e-Business 시스템 구축을 위한 기본 인프라 역할을 수행할 수 있게 된다. 많았고 년도에 따른 변화는 보이지 않았다. 스키손상의 발생빈도는 초기에 비하여 점차 감소하는 경향을 보였으며, 손상의 특성도 부위별, 연령별로 다양한 변화를 나타내었다.해가능성을 가진 균이 상당수 검출되므로 원료의 수송, 김치의 제조 및 유통과정에서 병원균에 대한 오염방지에 유의하여야 할 것이다. 확인할 수 있었다. 이상의 결과에 의하면 고농도의 유기물이 함유된 음식물쓰레기는 Hybrid Anaerobic Reactor (HAR)를 이용하여 HRT 30일 정도에서 충분히 직접 혐기성처리가 가능하며, 이때 발생된 $CH_{4}$를 회수하여 이용하면 대체에너지원으로 활용 가치가 높은 것으로 판단된다./207), $99.2\%$(238/240), $98.5\%$(133/135) 및 $100\%$ (313)였다. 각각 두 개의 요골동맥과 우내흉동맥에서 부분협착이나 경쟁혈류가 관찰되었다. 결론: 동맥 도관만을 이용한 Off pump CABG를 시행하여