• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1222-1228
• /
• 2010

본 연구는 인천 송도국제도시 중앙대로 구간의 도시철도공사와 인접한 연약지반 및 준설 매립층 개량공사와 관련하여 설계의 적정여부 판단 및 시공방안을 제시하기위해, 본공사에 앞서 시험시공을 통해 C.G.S의 개량효과를 확인하고 분석하였다. 시험시공결과 당초 설계제원에서 계획했던 개량효과가 만족되는 것으로 분석되었다.

• Journal of the korean Society of Automotive Engineers
• /
• v.4 no.1
• /
• pp.5-19
• /
• 1982

차량에 있어서 제동장치가 차지하는 중요도는 다른 부품에 비하여 매우 크다고 말할 수 있겠다. 그래서 차량 brake system을 적용하는데 있어서 가장 기초가 되는 수식 및 일반사항을 설명 함으로써 차량과 brake 관계를 넓게 이해하고 가장 적합한 제동장치의 설계에 도움을 주려는 데 본 기술의 목적이 있다. 우선 차량제원에 맞는 brake 성능에 관하여 생각하여 보자. 2개의 차 축을 갖고 있는 차량에서 제동할 경우 전 후 차축(front axle, rear axle)의 동하중(dynamic weight)은 정지상태 때의 하중과는 달라지게 된다. 그러므로 brake 성능은 이 동하중의 분배에 좌우되는 것이다.

• Journal of Korea Water Resources Association
• /
• v.47 no.7
• /
• pp.587-598
• /
• 2014

Recently runoff reduction facilities such as detention ponds were rarely used and limited primarily to cases. A specific installation criteria and method of design for runoff reduction facilities is insignificant in our country. Also it has difficult problems with quantification. A detention pond being installed at outfalls and generalized in our country is adopted as basic form with infiltration facilities because quantification index for runoff reduction facilities have not been developed. A processing of detention pond design has to determinate storage volume and outlet form is very complex and wasting human resources and time in the planning step. In this study, we have been unified FFC11-SimPOND being able to simply calculate size with simplified design method of culvert outlet and made a computing model (SimPOND-CO) for practical users.

• Computational Structural Engineering
• /
• v.10 no.2
• /
• pp.233-242
• /
• 1997

The main purpose of this paper is to investigate the dynamic optimal design of continuous beams. The computer-aided optimization technique is used to obtain the near-optimal parameters of continuous beam. The computer program is developed to obtain the natural frequency parameters and the forced vibration responses to a transit point load for the continuous beam with variable support spacing, mass and stiffness. The model test data is in good agreement with the computer calculation, which serves to validate the mathematical analysis. The optimization function to describe the design efficiency is defined as a linear combination of four dimensionless span characteristics; the maximum dynamic stress; the stress difference between span segments; the rms deflection under the transit point load; and the total span mass. Studies of three span beams show that the beam with near-optimal parameters can improve design efficiency when compared to a uniform beam with even spacing of the same total span length.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.856-866
• /
• 2021

The increasing international awareness regarding air pollutant reduction has resulted in increasing demand for eco-friendly ships; hence, electric ships are being actively developed by various countries. Presently, studies on electric ships are mainly focused on electric propulsion systems and electric motors. However, from the ship perspective, there are no studies on conceptual designs for coastal car ferries powered by removable power supply systems. In the present study, the main research consideration is regarding the conceptual design of a fully electrified car ferry using a battery-based removable system as the main power source. By analyzing the dimensions of more than 100 domestic coastal car ferries, the main criteria satisfying the requirements for developing a suitable vessel were derived, and a study on intact/damage stability was conducted considering the application of a removable battery truck. Further analyses of the problems concerning the conceptual design were also performed to derive solutions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.252-261
• /
• 2024

This research establishes design standards for vortex reduction devices (VRDs) aimed at minimizing underwater radiated noise by mitigating horseshoe vortex (HSV) and root vortex (RV) generated at the junction of appendages and the hull of underwater vehicles. Initial analysis replaced the influence of appendage dimensions and flow velocity with the Reynolds number by verifying the Reynolds similarity of vortex flows. The three-dimensional surfaces of VRDs were parameterized using Bezier curves. Optimal length-to-height ratios were identified by evaluating the vortex reduction performances of VRDs with various dimensions. Ultimately, non-dimensional design standards were derived for VRDs, ensuring effective vortex reduction across any appendage, thereby enhancing stealth performance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.5
• /
• pp.847-856
• /
• 2016

Recently, with a high level of economic growth, rapid urbanization, population, environment and housing problems were accompanied in Korea. In particular, the traffic problem has become a serious social problem. As the current transportation policy has been carried out, concentrating on traffic flow, in 2015, death rate for pedestrians while walking (1,795 persons) is 38.8% compared to entire death rate in car accident (4,621 persons), so there is need to solve it. Although, crosswalk should make pedestrian cross it safely, it has been made on the basis of the width of road without exact standard for current width of the crosswalk and the location of stop line. Moreover, in the area around many campuses or commercial facilities, crosswalks are set with not considering pedestrian passage, but designed uniformly. Therefore, the purpose of this study is to estimate reasonable dimension of crosswalk considering pedestrian traffic and walking speed and it makes the accident rate lower in the crosswalk, which has a lot of problems including decisions of vehicle traffic signal time, lack of pedestrian's signal timing, pedestrian's crossing of long-distance. The following are the methodology of the study. Firstly, for crosswalk calculation of specifications, examination relating existing regulations and researches dealing with crosswalk, pedestrians and stop line is needed. After analyzing problems of current width of crosswalk and stop line, present the methodology to calculation of specifications and basing on these things, calculation of specifications for crosswalk will be decided. In conclusion, the calculation of specification and improvement of stop line for crosswalk laid out in this study are expected to be utilized as base data in case of establishing relevant safety facilities and standards.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.2
• /
• pp.97-106
• /
• 2001

본 연구에서는 트러스 구조물의 이산최적설계를 위해 유전알고리즘(GA)을 적용하였다. 확률론적인 절차를 통해 설계에 필요한 초기 집단을 생성시킨 후, 설계를 개선시키기 위해서 자연선택 및 적자생존의 원리를 적용하였다. 다하중조건 하에서 트러스 구조물의 중량 최소화를 위해 응력 및 변위 제약을 고려하였다. 먼저, 이미 잘 알려진 트러스 구조물에 대해서 GA를 이용하여 얻은 최적해와 기존 문헌들에서 제시하고 있는 값들을 비교함으로써 GA의 신뢰성 및 적용성을 검증하였고, 이러한 신뢰성 검증을 바탕으로 사용성 있는 트러스 구조물의 이산최적설계를 위해 현재 생산중인 강재제원표로부터 부재가 선택되도록 하였다. 강재의 단면으로는 L형강을 사용하였으며, L형강의 강종은 9개의 강종들 (SS 400, SWS 400, SMA 41, SWS 490Y, SWS 520, SMA 50, SWS 570, SMA 58) 중에서 설계자에 의해 자유롭게 선택되도록 하였다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.555-562
• /
• 1995

리모콘은 전자제품과 인간의 interface로서 점차로 그 사용이 증대되고 있는 실정이다. 그러나 이러한 사용증대에도 불구하고 리모콘의 디자인 설계 단계에 있어서 인간공학적인 설계원칙에 관한 고려가 부족한 것이 현실이다. 따라서 본 연구에서는 인간공학적인 설계원칙을 적용한 리모콘의 설계를 제시하였다. 이를 위하여 본 연구에서는 기존의 인간공학적인 연구를 바탕으로 리모콘의 grip형태와 grip의 크기를 파악하고 제품기능의 파악과 task analysis를 통하여 button의 종류, 크기 및 형태를 결정하였다. 또한 제품기능의 중요도와 연관성을 파악하여 conceptual layout를 실시하였다. 마지막으로 손의 인체측정치와 손가락의 운동범위를 고려한 최종적인 control button layout을 결정하였다. 연구결과에 의하여 grip형태 및 크기, button의 크기, button사이의 간격, button간 layout등의 리모콘의 설계제원이 결정되어 설계에 적용되었다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.1
• /
• pp.117-124
• /
• 2004

In this paper, we took the clinical data of Korean eyes and designed the schematic eye with the same optical properties of the real eye. In the design process, we took the clinical emmetorpia data of young Korean adults collected in the past and analyzed to get a basic specification of the real eye for the design of schematic eye. The purpose of design was for the schematic eye to have the same optical properties of real eye in spherical aberration and astigmatism.